Professional Documents
Culture Documents
PC210LC: Tier 4 Final Engine
PC210LC: Tier 4 Final Engine
Hydraulic Excavator
2
PC210LC-11
Large LCD color monitor panel: Komatsu designed and manufactured components
Rearview monitoring system (standard) Komatsu Auto Idle Shutdown helps reduce idle time and operating costs.
Equipment Management Monitoring System (EMMS) continuously Operator Identification System can track machine operation for more
monitors machine operation and vital systems to identify machine issues than 100 operators.
and assist with troubleshooting.
3
PERFORMANCE FEATURES
4
PC210LC-11
Enhanced Productivity
The PC 210LC-11's P Mode provides improved performance
in demanding applications.
Productivity
Up to 4% increase
(compared to the PC210LC-10 in standard P Mode)
5
PERFORMANCE FEATURES
7% UP
101 kN(10.3t) 108 kN(11.0t) features an attachment mode (ATT/E) that allows operators
(with Power Max.) to run attachments while in Economy mode.
8% UP
P Power Mode
138 kN(14.1t) 149 kN(15.2t) multifunction
(with Power Max.) • Good cycle times with reduced
E Economy Mode
fuel consumption
Measured with Power Max. function, 3045 mm arm and ISO rating
Lifting Mode/ • Increased lifting power &
L
Fine Control fine control
• One way flow for hydraulic
B Breaker Mode
breaker operation
Performance priority
P P mode
Fuel savings priority
E E mode
Lifting operation
L L mode
One way flow breaker operation
B B mode
Two way flow attachment – Power
ATT/P ATT/P mode
Two way flow attachment – Economy
ATT/E ATT/E mode
6
PC210LC-11
WORKING ENVIRONMENT
7
WORKING ENVIRONMENT
Arm rest with simple height adjustment function Remote intermittent wiper Cigarette lighter
A knob and plunger on the with windshield washer
armrests allows easy height
adjustment without the use of
tools.
8
PC210LC-11
Indicators
1 Auto-decelerator 8 Fuel gauge
2 Working mode 9 DEF level gauge
1 2 3 3 Travel speed 10 Service meter, clock
4 Ecology gauge 11 Fuel consumption gauge
4 5 6 5 Camera display 12 Guidance icon
6 Engine coolant 13 Function switches
temperature gauge 14 Camera direction display
7 Hydraulic oil 15 DEF level caution
temperature gauge lamp
7
Basic operation switches
1 Auto-decelerator 4 Buzzer cancel
2 Working mode selector 5 Wiper
3 Travel speed selector 6 Window washer
7 Auto climate controls
1 2 3 4 5 6 7
9
WORKING ENVIRONMENT
10
PC210LC-11
MAINTENANCE FEATURES
Centralized engine check points Battery
Locations of the engine oil check and filters are integrated disconnect switch
into one side to allow easy maintenance and service. A standard battery
disconnect switch
Engine oil filter allows a technician to
disconnect the power
supply and lock out
before servicing the machine.
11
MAINTENANCE FEATURES
Long-life oils, filters Maintenance Information
High performance filters are used in the
hydraulic circuit and engine. By increasing “Maintenance time caution lamp” display
the oil and filter replacement intervals, When the remaining time to maintenance becomes less than
30 hours*, a maintenance time monitor appears. Pressing
maintenance costs can be significantly
the F6 key switches the monitor to the maintenance screen.
reduced. * : The setting can be changed within the range between 10 and 200 hours.
Maintenance screen
improved service
Supports the DEF level and refill timing
access.
The DEF level gauge is displayed continuously on the right
side of the monitor screen. In addition, when DEF level is
low, DEF low level guidance messages appear in pop up
displays to inform the operator in real time.
DT-type connectors
Sealed DT-type Waterproof seal
electrical connectors
provide high reliability, Waterproof seal
water and dust
resistance.
Waterproof seal
12
PC210LC-11
GENERAL FEATURES
ROPS CAB STRUCTURE
Large mirrors
Slip-resistant plates
Silicon
Oil
13
KOMATSU PARTS &
SERVICE SUPPORT
KOMATSU CARE Komatsu CARE® – Extended Coverage
Program Includes:
*The PC210LC-11 comes standard with complimentary
■ Extended Coverage can provide peace of mind by
factory scheduled maintenance for the first 3 Years or 2,000 protecting customers from unplanned expenses that
Hours, whichever comes first. effect cash flow
■ Purchasing extended coverage locks-in the cost of
Planned Maintenance Intervals at:
500/1000/1500/2000 hour intervals. (250 hr. initial interval for covered parts and labor for the coverage period and
some products) Complimentary Maintenance Interval includes: helps turn these into fixed costs
Replacement of Oils & Fluid Filters with genuine Komatsu Parts,
50-Point inspection, Komatsu Oil & Wear Analysis Sampling
(KOWA) / Travel & Mileage (distance set by distributor;
additional charges may apply)
Benefits of Using Komatsu CARE
■ Assurance of Proper Maintenance with OEM Parts & Service
■ Increased Uptime & Efficiency
■ Factory Certified Technicians Performing Work
■ Cost of Ownership Savings
■ Transferable Upon Resale
Complimentary KDPF Exchange
The PC210LC-11 comes standard with 2 Complimentary KDPF Komatsu Parts Support
Exchange Units for the first 5 Years (unlimited hours)
Complimentary KDPF Exchange Units are provided at: The
■ 24/7/365 to fulfill your parts needs
suggested KDPF Exchange Units Service Intervals of 4,500 ■ 9 parts Distribution Centers strategically located
hours and 9,000 hours during the first 5 years. End User must across the U.S. and Canada
have authorized Komatsu distributor perform the ■ Distributor network of more than 300 locations across
removal and installation of the KDPF. U.S. and Canada to serve you
Complimentary SCR System Maintenance ■ Online part ordering through Komatsu eParts
The PC210LC-11 also includes 2 factory recommended
services of the Selective Catalytic Reduction (SCR) Diesel ■ Remanufactured components with same-as-new
exhaust fluid (DEF) system during the first 5 years–no hour warranties at a significant cost reduction
limit–including: Factory recommended DEF tank flush and
strainer cleaning at 4,500 hours and 9,000 hours.
Interval PM 500 1000 1500 2000
KOWA SAMPLING – (Engine, Hydraulics, Swing
Circle, L & R Final Drives)
LUBRICATE MACHINE
LUBRICATE SWING CIRCLE
CHECK SWING PINION GREASE LEVEL AND ADD,
WHEN NECESSARY
CHANGE ENGINE OIL
REPLACE ENGINE OIL FILTER
REPLACE FUEL PRE-FILTER
REPLACE AC FRESH & RECIRC AIR FILTERS
CLEAN AIR CLEANER ELEMENT
DRAIN SEDIMENT FROM FUEL TANK Komatsu Oil and Wear Analysis (KOWA)
COMPLETE 50 POINT INSPECTION FORM; LEAVE
PINK COPY WITH CUSTOMER OR IN CAB ■ KOWA detects fuel dilution, coolant leaks, and
RESET MONITOR PANEL MAINTENANCE measures wear metals
COUNTER FOR APPROPRIATE ITEMS ■ Proactively maintain your equipment
REPLACE HYDRAULIC TANK BREATHER ELEMENT
REPLACE DEF TANK BREATHER ELEMENT ■ Maximize availability and performance
REPLACE FUEL MAIN FILTER ■ Can identify potential problems before they lead to
REPLACE HYDRAULIC OIL FILTER ELEMENT major repairs
CHANGE SWING MACHINERY OIL ■ Reduce life cycle cost by extending component life
CHECK DAMPER CASE OIL LEVEL, ADD WHEN
NECESSARY
CHANGE FINAL DRIVE OIL
CLEAN HYDRAULIC TANK STRAINER
REPLACE KCCV FILTER ELEMENT
REPLACE DEF PUMP FILTER
FACTORY TRAINED TECHNICIAN LABOR
2 KDPF Exchanges at 4,500 Hrs and 9,000 Hrs. * Certain exclusions and limitations apply. Refer to the customer certificate for
2 SCR System Maintenance Services at 4,500 Hrs. and 9000 Hrs. complete program details and eligibility. Komatsu® and Komatsu Care ® are
14 registered trademarks of Komatsu Ltd. Copyright 2017 Komatsu America Corp.
PC210LC-11
standard equipment
- any time, anywhere
on all Komatsu
construction products
For construction and compact equipment. For production and mining class machines.
15
SPECIFICATIONS
Engine Swing System
Model................................................... Komatsu SAA6D107E-3* Drive method............................................................ Hydrostatic
Type.................................Water-cooled, 4-cycle, direct injection Swing reduction................................................... Planetary gear
Aspiration........................................ Komatsu Variable Geometry Swing circle lubrication....................................... Grease-bathed
Turbocharged, aftercooled, cooled EGR Service brake........................................................ Hydraulic lock
Number of cylinders................................................................. 6 Holding brake/Swing lock........................ Mechanical disc brake
Bore......................................................................107 mm 4.21" Swing speed................................................................. 12.4 rpm
Stroke...................................................................124 mm 4.88" Swing torque...................................... 6900 kg•m 49,907 ft lbs
Piston displacement............................................6.69 ltr 408 in3
Horsepower
ISO 9249 / SAE J1349..........................Net 122.8 kW 165 HP Undercarriage
Fan at maximum speed........................ Net 118.6 kW 159 HP Center frame................................................................... X-frame
Rated rpm....................................................................2000 rpm Track frame...............................................................Box-section
Fan drive method for cooling radiator................Mechanical with Seal of track.............................................................Sealed track
viscous fan clutch
Governor......................................... All-speed control, electronic Track adjuster...............................................................Hydraulic
*EPA Tier 4 Final emissions certified Number of shoes (each side)................................................. 49
Number of carrier rollers (each side)......................................... 2
Number of track rollers (each side)........................................... 9
Hydraulics
Type ................ HydrauMind (Hydraulic Mechanical Intelligence) coolant & lubricant capacity
system, closed-center system with load sensing valves and ( Refilling)
(Number of cylinders – bore x stroke x rod diameter) Operating weight includes 5700 mm 18'8" one-piece boom,
Boom... 2–130 mm x 1334 mm x 90 mm 5.1" x 52.5" x 3.5" 2925 mm 9'7" arm, SAE heaped 1.19 m3 1.57 yd 3 bucket,
Arm.......1–135 mm x 1490 mm x 95 mm 5.3" x 58.7" x 3.7" rated capacity of lubricants, coolant, full fuel tank, operator,
Bucket... 1–115 mm x 1120 mm x 80 mm 4.5" x 44.1" x 3.2" and standard equipment.
Ground Pressure
Triple-Grouser Shoes Operating Weight
ISO 16754
Dr ives and br akes 700 mm 24160 kg 0.47 kg/cm2
28" 53,265 lb 6.7 psi
Steering control.......................................Two levers with pedals 800 mm 24440 kg 0.42 kg/cm2
Drive method............................................................ Hydrostatic 31.5" 53,882 lb 5.9 psi
Maximum drawbar pull....................202 kN 20570 kg 45,349 lb
Component Weights
Gradeability...................................................................70%, 35°
Arm including bucket cylinder and linkage
Maximum travel speed: High......................... 5.5 km/h 3.4 mph 2900 mm 9'7" HD arm assembly.......................1136 kg 2,505 lb
(Auto-Shift) Mid.......................... 4.1 km/h 2.5 mph 2900 mm 9'7" HD arm assembly w/piping....... 1200 kg 2,646 lb
(Auto-Shift) Low......................... 3.0 km/h 1.9 mph
One piece boom including arm cylinder
Service brake........................................................ Hydraulic lock 5700 mm 18'8" boom assembly........................ 1885 kg 4,156 lb
Parking brake........................................... Mechanical disc brake 5700 mm 18'8" HD boom assembly w/piping... 1953 kg 4,306 lb
Boom cylinders x 2.............................................. 205 kg 452 lb
Counterweight (standard)................................ 4370 kg 9,634 lb
1.19 m3 1.57 yd 3 bucket - 48" width..................949 kg 2,092 lb
16
PC210LC-11
Dimens ions
- Used with material weights up to 3,500 lb/yd3 – Quarry/rock/high abrasion applications - Used with material weights up to 3,000 lb/yd3 – Tough digging applications
£ - Used with material weights up to 2,500 lb/yd3 – General construction - Used with material weights up to 2,000 lb/yd3 – Light materials applications
X - Not useable
17
SPECIFICATIONS
working range
(m) H
12
11
10
9
8
7
6
A 5
4
B
3
2
1
0 G.L.
-1
-2
C E D -3
-4
-5
-6
-7
11 10 9 8 7 6 5 4 3 2 1 0
(m) 2.44
G
F
132 kN
Bucket digging force at power max.
SAE rating
13500 kg / 29,762 lb
103 kN
Arm crowd force at power max.
10500 kg / 23,149 lb
149 kN
Bucket digging force at power max.
ISO rating
15200 kg / 33,510 lb
108 kN
Arm crowd force at power max.
11000 kg / 24,251 lb
18
PC210LC-11
LIFT CAPACITIES
Lifting capacity with lifting mode
A: Reach from swing center Conditions:
A
B: Bucket hook height • 5700 mm 18' 8" one-piece boom
C: Lifting capacity • Counterweight: 4370 kg 9,634 lb
Cf: Rating over front • Bucket: None
Cs: Rating over side • Lifting mode: On
B : Rating at maximum reach
19
STANDARD EQUIPMENT
■ 3 Speed travel with Auto shift ■ Extended work equipment grease interval ■ Revolving frame deck guard
■ Alternator, 90 Ampere, 24V ■ Fan guard structure ■ Revolving frame undercovers
■ ROPS cab
■ AM/FM radio ■ Fuel system pre-cleaner 10 micron
■ Seat belt, retractable, 76 mm 3"
■ Automatic engine warm-up system ■ High back air suspension seat, with heat
■ Seat belt indicator
■ Automatic air conditioner/heater ■ Hydraulic track adjusters
■ Secondary engine shutoff switch
■ Auto idle ■ KOMTRAX® Level 5.0
■ Service valve
■ Auto Idle Shutdown (programmable) ■ Large LCD color monitor, high resolution
■ Shoes, triple grouser, 800 mm 31.5"
■ Lever lock Auto-lock ■ Lock lever
■ Skylight
■ Auxiliary input (3.5 mm jack) ■ Mirrors, (LH and RH)
■ Slip resistant foot plates
■ Batteries, large capacity ■ Operator Protective Top Guard (OPG),
■ Starter motor, 5.5kW/24V x 1
■ Battery disconnect switch Level 1
■ Suction fan
■ Boom and arm holding valves ■ Operator Identification System
■ Thermal and fan guards
■ Carrier rollers (2 each side) ■ Pattern change valve (ISO to BH control)
■ Track frame undercover
■ Converter, (2) x 12V ■ Power maximizing system
■ Track frame swivel guard
■ Counterweight, 4370 kg 9,634 lb ■ PPC hydraulic control system
■ Travel alarm
■ Dry type air cleaner, double element ■ Pump/engine room partition cover
■ Working lights, 2 (boom and RH front)
■ Electric horn ■ Radiator and oil cooler dustproof net
■ Working mode selection system
■ EMMS monitoring system ■ Rear reflectors
OPTIONAL EQUIPMENT
■ Arms ■ Cab guards ■ Sun visor
– 2925 mm 9'7" HD arm assembly – Full front guard, OPG Level 1 ■ Rain visor
– 2925 mm 9'7" HD arm assembly – Full front guard, OPG Level 2 ■ Straight travel pedal
with piping – Bolt-on top guard, OPG Level 2 ■ Track roller guards, full length
■ Booms – Lower front window guard ■ Working light, front, one additional
Attachment options
■ Cab air pre-cleaner ■ Super long fronts For a complete list of available
■ Grade control systems ■ PSM thumbs attachments, please contact your local
■ Hydraulic couplers ■ Rockland thumbs Komatsu distributor.
■ Hydraulic kits, field installed ■ Vandalism protection guards with storage box
AESS875-04 ©2017 Komatsu America Corp. Printed in USA AD09(2.5M)OTP 09/17 (EV-1)