Professional Documents
Culture Documents
Manual Lathe
Manual Lathe
AND
MAINTENANCE
MANUAL
LATHE
TABLE OF CONTENTS
Pag.
INTRODUCTION 3
SAFETY GEARS 4
1. SAFETY 5
2. INSTALLATION 11
3. OPERATION 15
4. MAINTENANCE
~2~
INTRODUCTION
The parallel lathe is the machine tooling most used in
the industry, in this maintenance and operation
manual of the machine are found the safety gears
that must use to operate the lathe, basic instructions
of safety, installations instructions of the machine,
operating parameters and maintenance operation to
must make to the machine to maintain its correct
operation.
~3~
SAFETY GEARS
Goggles
Coverall
Safety Boots
~4~
1. SAFETY
The lathe can make threats
~5~
The operator cannot eat in the workshop
~6~
The operator should read the operation and
maintenance manual
~7~
The operator should not speak while he operates
the machine
~8~
The operator must wear safety boots
~9~
The operator must not wear accessories while he
operates the lathe
~ 10 ~
2. INSTALLATION
~ 12 ~
The transmission belts of lathe are evaluated
~ 13 ~
The amperage and voltage are measured
3. OPERATION
~ 14 ~
Sharpen the tool in the emery
~ 17 ~
Adjust the speeds of lathe
~ 18 ~