Professional Documents
Culture Documents
Table 0F Specifiction Test Distribution Item Total No. of Item Percentage Factual Knowledge Comprehension Application
Table 0F Specifiction Test Distribution Item Total No. of Item Percentage Factual Knowledge Comprehension Application
Prepare welding
materials and 4 2 2 8 20%
tools
Set-up welding
4 4 4 12 30%
Equipment
Perform tack
4 4 4 12 30%
welding
Perform
4 2 2 8 20%
housekeeping
TOTAL 16 12 12 40 100%
Written test
I. True or False
Instruction: Write TRUE if the state are correct and FALSE if not
_________1. Fabricator is the one who Are responsible in installing an
maintaining pipes.
_________2. Plumbers, fitters and steamfitter determine the amount of
material and type of equipment needed.
_________3. Welding Procedure Specification (WPS) is a formal written
document that qualities the welding procedure specification.
_________4. The arc welding power source provides either alternating current
(AC) or a direct current (DC) using a positive or negative electrode.
_________5. Specific codes and/or engineering societies are often the driving
force behind the development of a company’s WPS.
_____ ____6. WPQR combines all of the information of the WPS and adds the
test results to provide an incomplete document that certifies the welding
specification.
__________7Safety glasses used to protect the eyes when chipping slag and
grinding.
__________8. Leather skull cap protect the head from heat.
____ _____ 9. If the current is too low, the electrode melts too fast.
__________ 10. Quality or sound weld is the result of correct current, constant
voltage, travel speed, electrode angle and correct electrode size.
II.MATCHING TYPE
Instruction: Match indicators in column A to its results in column B. Write
only the letter on your answer sheet.
Column A Column B
____ 34. Voltage High A. Wet Electrode
____ 35. High Current B. Arc Length Too Long
____ 36. Arc Strike C. Spatter
____ 37. Slag Inclusion D. Low Current
____ 38. Porosity E. Failure To Clean The
____ 39. Arc Blow Weld
____ 40. Poor Penetration F. Improper Starting Of Arc
G. Undercut
ANSWER KEY
PERFORMANCE TEST
I. True Or False
1. FALSE
2. TRUE
3. FALSE
4. TRUE
5. TRUE
6. FALSE
7. TRUE
8. TRUE
9. FALSE
10. TRUE
11. FALSE
12. TRUE
13. TRUE
14. FALSE
15. FALSE
16. FLASE
17. TRUE
18. FALSE
19. TRUE
20. TRUE
Specific Instruction:
plas