Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Project Summary No.

PS-4460-AU-S&G

Small inlet works system – ST Fine Screen with


screenings washer/compactor (Miniwasher
Dewaterer) and Grit Vortex Chamber / Classifier

Conveying Technology
Air Blast into sump to
stir up grit Air vent stack

Air into collection pipe to


draw up grit / water Grit classifier
Three way valve

The Grit System: Air/water/grit


mixture
Grit Vortex System
SPIRAC Model VG30
Design Flow – 310 lps Air from
blowers
• air lift grit removal
with duty/standby Concrete tank
blowers (By others)
• 3.0 m diameter
vortex chamber
• tank available in
steel instead of
concrete

Protective checkerplate
cover (By others)
Slewing bearing / Gearbox
assembly for impeller rotation

Grit and heavier particles settle


to collection sump for removal
by air lift pump, organics and
lighter particles retained in
suspension by impeller.

A view inside the vortex

Contact:
For additional information or contact details for this project or your local SPIRAC
office, check our Website at www.spirac.com
Project Summary No. PS-4460-AU-
S&G

Air
Air/water/grit mixture
SA 320
Classifier
Conveying Technology Grit / Water

Return to channel
Recovered grit

The Grit System: Duty / Stand by blowers in acoustic


enclosures (OnReturn
timed to channel
intermittent
Classifier SPIRAC Model operation, adjusted by grit loading)
SA320 c/w:
• shaftless spiral
incline conveyor
• low (5) RPM

The Screenings
System:
SPIRAC Spiroguard ST
Screen Model 1900-600-6
• 366 lps @ 150mm
head loss
• pivots out of channel
for servicing/cleaning
• stepped screenings Rubber seal
removal by upstream between
level controller channel wall
and screen
• no chains or frame (by
sprockets in water SPIRAC)
• “hooked” step profile
to ensure high
capture efficiency
• few moving parts

Contact:
For additional information or contact details for this project or your local SPIRAC
office, check our Website at www.spirac.com
Project Summary No. PS-4460-AU-S&G
Project Summary No. PS-Scr-5.2

Press tube

Conveying Technology

The Screenings
System:
SPIRAC Miniwasher
Dewaterer: Model WD150-400
• up to 0.5m3/hr solids
• washing and rinsing
section
• very high torque Channel flow 310 lps
compaction
• 40-45% DS output
• Longopac continuous Longopac continuous bag bagging system
bagging system
provides secure
odour control, easy,
clean handling of Screen Pivot Point (Screen pivot out of
screenings. channel for service / cleaning)
• Screen and
Miniwasher operation Inspection hatch (open)
(including wash water
solenoids) on level
control, operating
Autolube canister Rinse water solenoid valve

Wash water solenoid valve

Miniwasher
Gearbox Dewaterer Wash/rinse water return to channel

Contact:
For additional information or contact details for this project or your local SPIRAC
office, check our Website at www.spirac.com

You might also like