Republic of the Philippines

Department of Education
Region XII
Division of Cotabato
MANUANGAN HIGH SCHOOL
Manuangan, Pigcawayan, Cotabato
Grade 12 Electronic Product Assembly and Servicing NCII
FOURTH QUARTER EXAMINATION

Name: ______________________________ Score: ________

I. Direction: Find out how much you already know. Identify the parts of CCTV. Write the letter of
the correct answer to the space given.
_______1. It is the part of CCTV where the data is being saved.
a. Flash Drive b. HD Connector
c. Hard Disk Drive d. SATA Connector
_______2. It is the part of CCTV where the output video of the camera is showed.
a. Monitor b. HD Connector
c. Hard Disk Drive d. SATA Connector
_______3. The adapter for coaxial cable and DVR.
a. Monitor b. HD Connector
c. BNC d. SATA Connector
_______4. It is used to control the pointer in the monitor.
a. Monitor b. HD Connector
c. Mouse d. BNC
_______5. It is used to capture the image.
a. Monitor b. HD Connector
c. Camera d. Flash Drive
II. Identify the sections of Television. Write the letter of the correct answer to the space given.
_______6. It is part of the TV where it controls the power source of all sections of TV.
a. Secondary Section b. Audio Section
c. Primary Section d. Video Section
_______7. It is part of the TV where you will find direct current mostly.
a. Secondary Section b. Audio Section
c. Primary Section d. Video Section
_______8. It is part of the TV where you will find the control of sounds.
a. Secondary Section b. Audio Section
c. Primary Section d. Video Section
_______9. It is part of the TV where you will find the control of image.
a. Secondary Section b. Audio Section
c. Primary Section d. Video Section
_______10. It is part of the TV where you will received the signal and decode.
a. Secondary Section b. Audio Section
c. Tuner Section d. Video Section

II. Draw the Schematic Diagram of AC/DC Converter.

Score for items 11-24
Pointa Descrintion
7 Draw all the components
6 Draw 6 components with
5 Draw 5 components with
4 Draw 4 components with
3 Draw 3 components with
2 Draw 2 components with
1 Draw 1 components with
needed with correct connection
correct connections
correct connections
correct connections
correct connections
correct connections
correct connections

11-17.
18-24. Draw the Schematic Diagram of Regulated Power Supply.

25-36. Draw the Schematic Night Switch.

Pointa Descrintion
12 Draw all the components needed with correct connection
11 Draw 17 components with correct connections
10 Draw 16 components with correct connections
9 Draw 15 components with correct connections
8 Draw 14 components with correct connections
7 Draw 13 components with correct connections
6 Draw 12 components with correct connections
5 Draw 11 components with correct connections
4 Draw 10 components with correct connections
3 Draw 9 components with correct connections
2 Draw 8 components with correct connections
1 Draw 7 and below components with correct connections

37-40. Draw your PCB Lay-out of Regulated Power Supply.

Pointa Descrintion
7 Draw all the components
6 Draw 6 components with
5 Draw 5 components with
4 Draw 4 components with
3 Draw 3 components with
2 Draw 2 components with
1 Draw 1 components with
needed with correct connection
correct connections
correct connections
correct connections
correct connections
correct connections
correct connections
 Republic of the Philippines
Department of Education
Region XII
Division of Cotabato
MANUANGAN HIGH SCHOOL

TABLE OF SPECIFICATION
Grade 12 EPAS EXAM
Fourth Quarter

Date Submitted: January 10, 2019

Objective Number Item Easy Average Difficult
of Item Location (60%) (30%) (10%)
I. Identify the parts of CCTV 10 1-10 10
II. Identify the sections of TV. 5 11-17 7
III. Illustrate the Schematic diagram of
9 18-24 7
AC/DC Converter.
IV. Illustrate the Schematic diagram of
12 25-36 12
Voltage Regulator.
V. Illustrate the learners PCB Lay-out of
4 4
Voltage Regulator
TOTAL 40 24 12 4

Prepared by:

KRIS IAN J. RIVERA

Subject Teacher

Checked by:

ESTELITA M. FAUNILLAN
Master Teacher I