Professional Documents
Culture Documents
GRT8100 Ficha Tecnica.
GRT8100 Ficha Tecnica.
Product Guide
ANSI B30.5
Imperial 85%
Features
• 90 t (100 USt) capacity • Intuitive, user friendly controls with electronic
joysticks and operator customizable function
• 12 m – 47 m (39.2 ft – 154.3 ft) five-section
speeds
full-power boom
• Full vision cab with 20° tilt feature
• 10 m – 17 m (33 ft – 56 ft) manual offsettable
bi-fold lattice swingaway extension
• 9979 kg (22,000 lb) standard counterweight
hydraulically installed and removed
GROVE GRT8100
The GRT8100 was designed after gathering feedback from crane owners and
operators to ensure that it is loaded with the features and reliability you demand.
Features
Cab
The cab is designed with operator comfort and productivity in
mind with full-vision design and 20° tilt for improved viewing
at high boom angles. The tilt/telescoping steering wheel can be
positioned for optimum use.
Control system
The new Crane Control System (CCS) offers a user-friendly
interface, two full graphic displays mounted vertically for easier
viewing and a jog dial for easier navigation and data input. The
system allows the electronic controllers to be reprogrammed by
the operator for specific speed and reaction. Parts commonality
across Grove, Manitowoc and Potain product lines enhances
operator familiarization and serviceability.
Boom
Lifting performance is enhanced by the 12 m – 47 m
(39.2 ft – 154.3 ft) five-section, full-power MEGAFORM™
boom with sequenced, synchronized extension capability. The
boom system offers three operational modes of extension and
retraction and one mode specifically for maintenance.
Manitowoc Crane Care when you need it. Manitowoc Finance helps you get right to
The assurance of the world’s most advanced crane work generating profits for your business.
service and support to get you back to work fast. Financial tools that help you capitalize on
opportunity with solutions that fit your needs.
Contents
Dimensions ..................................................................................................................................................................... 5
Weights .......................................................................................................................................................................... 6
Working range................................................................................................................................................................. 7
Specifications................................................................................................................................................................... 21
Symbols glossary.............................................................................................................................................................. 23
Dimensions
16,3 m 16,8 m 13,6 m 12,9 m 12,5 m 10,1 m 8,8 m 11,8 m 12,2 m 8,4 m 7,7 m 7,3 m 4,9 m 4,6 m
(53’ 6”) (55’ 1”) (44’ 7”) (42’ 4”) (41’ 0”) (33’ 2”) (28’ 10”) (38’ 9”) (40’ 0”) (27’ 7”) (25’ 3”) (23’ 11”) (16’ 1”) (15’ 1”)
3335
(131)
24° 24°
CL of rotation
A B C D E Outside turn radius F G R4568
Outside Inside turn radius Inside curb (180)
curbclearance radius Tail swing
14 531 (572)
11 960 (471)
1220 (48)
3746
(147)
25° 21°
551 (22)
2307 (91)
501 4215 (166)
(20) 5693 (224) 8590 (338)
15 070 (593)
Grove GRT8100 5
Weights
Weights
GVW Front Rear
kg lb kg lb kg lb
Basic Machine (T4F): including 47 m (154.3 ft) main
boom, main and auxiliary hoist with 214 m (702 ft)
of rope, manual offsettable bi-fold swingaway,
53 507 117,961 28 038 61,813 25 468 56,148
9980 kg (22,000 lb) counterweight, 10,8 t (12 USt)
headache ball, and 81,6 t (90 USt) hook block.
Add: 2268 kg (5000 lb) heavy counterweight 2255 4971 -827 -1824 3082 6795
Remove: manual bi-fold extension -1183 -2609 -1848 -4075 665 1466
Remove: Hydraulic bi-fold extension -1341 -2956 -2123 -4680 782 1724
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
6 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Working range
260
240
0° offset
20° offset
220 56' EXT
180
139.9
140
125.5
80°
70° 111.1
120
60°
96.8
50°
100
82.4
40°
80 68.0
30°
53.6
60
20° 39.2
40
10°
80° max
20 boom angle
0
260 220 180 140 100 60 20
240 200 160 120 80 40
Axis of
rotation
Operating radius in feet from axis of rotation
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 7
Load chart
Pounds
200,000
8 — — — — — — — — — — —
(72.5)
187,500
9 — — — — — — — — — — —
(71)
177,000 56,100 136,500 55,550 55,500 97,600 *55,500 *55,500 *55,450
10 — — —
(69) (75.5) (75.5) (78.5) (78.5) (79) (80) (80) (80)
158,500 56,100 136,500 55,550 55,500 97,600 55,500 55,500 55,450
12 — — —
(66) (73) (73) (77) (77) (77) (79.5) (79.5) (79.5)
135,500 56,100 134,500 55,550 55,500 93,750 55,500 55,500 55,450 37,850 55,500 55,450
15
(61) (69.5) (69.5) (74) (74) (74.5) (77) (77) (77.5) (79.5) (79.5) (79.5)
103,000 56,100 102,000 55,550 55,500 76,300 55,500 55,500 55,450 37,850 55,500 55,450
20
(51.5) (63.5) (63.5) (69.5) (69.5) (70) (73.5) (73.5) (74) (76.5) (76.5) (76.5)
79,800 56,100 78,200 55,550 55,500 63,400 55,500 55,500 55,450 37,850 55,500 54,200
25
(40) (57) (57) (65) (65) (65) (70) (69.5) (70) (73.5) (73.5) (73.5)
59,750 56,100 55,250 55,550 55,500 53,800 55,500 55,500 49,150 37,850 55,500 46,150
30
(23.5) (50) (50) (60) (60) (60.5) (66) (66) (66.5) (70) (70) (70.5)
46,000 41,900 46,950 43,900 43,500 47,750 45,800 42,300 34,400 47,850 39,750
35 —
(42) (42) (55) (55) (55) (62) (62) (62.5) (67) (67) (67)
35,800 32,650 37,200 34,700 33,200 38,200 36,100 34,300 30,550 38,100 34,600
40 —
(32.5) (32) (49.5) (49) (49.5) (58) (58) (58.5) (63.5) (63.5) (64)
28,650 25,000 30,350 28,200 25,950 31,450 29,300 27,150 27,350 30,900 28,250
45 —
(16.5) (16.5) (43.5) (43) (43.5) (53.5) (53.5) (54) (60) (60) (60.5)
25,100 22,600 20,450 26,450 24,200 21,800 24,750 25,550 22,950
50 — — —
(36) (36) (36) (49) (48.5) (49.5) (56.5) (56.5) (57)
21,050 18,200 16,200 22,600 20,300 17,650 22,500 21,450 18,850
55 — — —
(27) (27) (27) (44) (43.5) (44) (53) (53) (53)
17,800 14,700 12,800 19,500 17,150 14,300 19,950 18,150 15,550
60 — — —
(11) (10.5) (11) (38.5) (38) (38.5) (49) (49) (49)
16,900 14,550 11,550 17,350 15,400 12,900
65 — — — — — —
(31.5) (31.5) (32) (45) (44.5) (45)
14,550 12,350 9280 15,100 13,150 10,700
70 — — — — — —
(23) (23) (23.5) (40) (40) (40)
13,200 11,250 8770
75 — — — — — — — — —
(35) (34.5) (35)
11,500 9570 7120
80 — — — — — — — — —
(28.5) (28.5) (28.5)
9990 8080 5690
85 — — — — — — — — —
(20.5) (20) (20.5)
Maximum boom length (ft) at 0° boom angle (no load) – Mode A and X 125.5
Maximum boom length (ft) at 0° boom angle (no load) – Mode B 111.1
28,350 18,300 16,000 13,100 10,600 8410 9240 7240 5390 6590 4920 3380
0°
(31.7) (46.1) (46.1) (60.5) (60.5) (60.5) (74.8) (74.8) (74.8) (89.2) (89.2) (89.2)
Pounds
Maximum boom length (ft) at 0° boom angle (no load) - Mode A and X 125.5
Maximum boom length (ft) at 0° boom angle (no load) - Mode B 111.1
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 9
Load chart
Manual extension
Pounds
30
*13,900
— — — — —
2. For main boom lengths less than 154.3
(80)
ft with the boom extension erected,
13,900 *7960
35 — — — — the rated loads are determined by
(79.5) (80)
40
13,900 *13,600
—
7960
— —
boom angle. Use only the column that
(78) (80) (79)
corresponds to the boom extension
13,900 13,600 7960
45 — — — length and offset for which the machine
(76.5) (79.5) (78)
50
13,900 13,600 11,750 7960
— —
is set up. For boom angles not shown, use
(75) (78) (80) (76.5)
rating of the next lower boom angle.
13,900 13,600 11,600 7960 6700
55 —
(73.5) (76.5) (78.5) (75.5) (80) 3. WARNING: Operation of this machine
13,900 13,550 11,450 7960 6450
60 — with heavier loads than the capacities
(72) (75) (76.5) (74) (79)
13,900 13,300 11,300 7960 6240 *5000 listed is strictly prohibited. Machine
65
(70.5) (73) (75) (72.5) (77.5) (80) tipping with boom extension occurs
13,900 13,000 11,150 7600 6040 5000
70 rapidly and without advance warning.
(69) (71.5) (73.5) (71.5) (76) (79.5)
12,100 12,750 11,050 7190 5850 4900
75
(67.5) (70) (71.5) (70) (74.5) (78) 4. Boom angle is the angle above or below
10,500 11,500 10,950 6780 5660 4810 horizontal of the longitudinal axis of the
80
(66) (68.5) (70) (68.5) (73) (76.5) boom base section after lifting rated load.
9150 10,050 10,750 6450 5500 4730
85
(64.5) (66.5) (68) (67.5) (72) (74.5) 5. Capacities listed are with outriggers
7930 8750 9370 6120 5350 4650 properly extended and vertical jacks set
90
(62.5) (64.5) (66.5) (66) (70.5) (73)
6870 7600 8170 5860 5200 4580 only.
95
(60.5) (63) (64.5) (64.5) (69) (71.5)
5920 6580 7100 5600 5050 4510
6. When lifting over the main boom nose
100
(58.5) (61) (62.5) (63) (67.5) (69.5) with 33 ft or 56 ft extension erected, the
5070 5670 6140 5360 4920 4450 outriggers must be fully extended.
105
(56.5) (58.5) (60.5) (61.5) (66) (68)
4310 4860 5280 4900 4800 4390
110
(54.5) (56.5) (58) (60) (64) (66)
3620 4120 4500 4220 4690 4340
115
(52.5) (54.5) (56) (58.5) (62.5) (64.5)
3000 3450 3800 3610 4580 4290
120
(50) (52.5) (53.5) (56.5) (60.5) (62.5)
2430 2830 3150 3050 3950 4240
125
(48) (50) (51) (54.5) (59) (61)
1910 2270 2560 2530 3370 3940
130
(45.5) (47.5) (48.5) (52.5) (57) (59)
1430 1760 2020 2060 2850 3340
135
(43.5) (45) (46) (50.5) (55) (57)
1280 1520 1630 2360 2790
140 —
(43) (43.5) (48.5) (52.5) (55)
1060 1220 1900 2280
145 — —
(40.5) (46.5) (50.5) (53)
1480 1800
150 — — — —
(48.5) (50.5)
1090 1360
155 — — — —
(46.5) (48)
Min. boom angle
for indicated
41° 40° 39° 45° 45° 46°
length
(no load)
Max. boom
length at 0°
97 ft 97 ft
boom angle
(no load)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Working range
260
0° offset
20° offset
56' EXT
240
200
180
160
Height from ground in feet
139.9
140 125.5
80°
70° 111.1
120 60°
96.8
50°
100 82.4
40°
68.0
80 30°
53.6
60 20°
39.2
40 10°
80° max
boom angle
20
0
260 220 180 140 100 60 20 Axis of
240 200 160 120 80 40 rotation
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 11
nds
Load chart
Manual extension
Pounds
76 ft length (56 ft ext + 20 ft insert) 1. The 56 ft folding boom extension length may
be used for single line lifting service only.
Feet
0° offset 20° offset 40° offset 2. For main boom lengths less than 154.3 ft
with the boom extension erected, the rated
*6190
40
(80)
— — loads are determined by boom angle. Use
6190 only the column that corresponds to the
45 — —
(79.5) boom extension length and offset for which
6190 the machine is set up. For boom angles not
50 — —
(78.5)
6190 shown, use rating of the next lower boom
55 — —
(77.5) angle.
6190 *6000
60 — 3. WARNING: Operation of this machine with
(76) (80)
65
6190 6000
—
heavier loads than the capacities listed is
(75) (79.5)
strictly prohibited. Machine tipping with
6190 5940
70 — boom extension occurs rapidly and without
(74) (78)
6190 5760 4800 advance warning.
75
(72.5) (77) (80)
6190 5580 4800 4. Boom angle is the angle above or below
80
(71.5) (75.5) (78.5) horizontal of the longitudinal axis of the
6190 5420 4800 boom base section after lifting rated load.
85
(70) (74.5) (77.5)
90
6190 5260 4740 5. Capacities listed are with outriggers properly
(69) (73) (76)
extended and vertical jacks set only.
6190 5130 4670
95
(68) (72) (74.5) 6. When lifting over the main boom nose with
6090 5000 4610 the 56 ft extension erected and 20 ft insert,
100
(66.5) (70.5) (73)
5830 4880 4540 the outriggers must be fully extended.
105
(65) (69.5) (71.5)
5100 4760 4480
110
(64) (68) (70.5)
4440 4650 4430
115
(62.5) (66.5) (69)
3840 4540 4380
120
(61) (65) (67.5)
3290 4150 4330
125
(59.5) (63.5) (66)
2780 3580 4220
130
(58) (61.5) (64)
2320 3060 3630
135
(56) (60) (62.5)
1900 2570 3080
140
(54.5) (58) (60.5)
1500 2130 2580
145
(52.5) (56) (58.5)
1140 1710 2110
150
(51) (54.5) (56.5)
1320 1680
155 —
(52.5) (54.5)
1270
160 — —
(52.5)
Min. boom angle
for indicated
50° 51° 51°
length
(no load)
Max. boom
length at 0°
82 ft
boom angle
(no load)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chart
Hydraulic extension
65
13,900 13,300 11,300 7960 6240 *5000 boom angle.
(70.5) (73) (75) (72.5) (77.5) (80)
13,900 13,000 11,150 7600 6040 5000 WARNING: Operation of this machine with
70
(69) (71.5) (73.5) (71.5) (76) (79.5) heavier loads than the capacities listed is
12,100 12,750 11,050 7190 5850 4900
75
(67.5) (70) (71.5) (70) (74.5) (78)
strictly prohibited. Machine tipping with
10,500 11,500 10,950 6780 5660 4810 boom extension occurs rapidly and without
80
(66) (68.5) (70) (68.5) (73) (76.5) advance warning.
9150 10,050 10,750 6450 5500 4730
85
(64.5) (66.5) (68) (67.5) (72) (74.5) 4. Boom angle is the angle above or below
90
7930 8750 9370 6120 5350 4650 horizontal of the longitudinal axis of the
(62.5) (64.5) (66.5) (66) (70.5) (73)
boom base section after lifting rated load.
6870 7600 8170 5860 5200 4580
95
(60.5) (63) (64.5) (64.5) (69) (71.5)
5. Capacities listed are with outriggers properly
5920 6580 7100 5600 5050 4510
100
(58.5) (61) (62.5) (63) (67.5) (69.5) extended and vertical jacks set only.
5070 5670 6140 5360 4920 4450 6. When lifting over the main boom nose
105
(56.5) (58.5) (60.5) (61.5) (66) (68)
4310 4860 5280 4900 4800 4390 withthe 33 ft or the 56 ft extension erected
110
(54.5) (56.5) (58) (60) (64) (66) and 20 ft insert, the outriggers must be fully
115
3620 4120 4500 4220 4690 4340 extended.
(52.5) (54.5) (56) (58.5) (62.5) (64.5)
3000 3450 3800 3610 4580 4290
120
(50) (52.5) (53.5) (56.5) (60.5) (62.5)
2430 2830 3150 3050 3950 4240
125
(48) (50) (51) (54.5) (59) (61)
1910 2270 2560 2530 3370 3940
130
(45.5) (47.5) (48.5) (52.5) (57) (59)
1430 1760 2020 2060 2850 3340
135
(43.5) (45) (46) (50.5) (55) (57)
1280 1520 1630 2360 2790
140
(43) (43.5) (48.5) (52.5) (55)
1060 1220 1900 2280
145
(40.5) (46.5) (50.5) (53)
1480 1800
150
(48.5) (50.5)
1090 1360
155
(46.5) (48)
Min. boom
angle for
indicated 41° 40° 39° 45° 45° 46°
length
(no load)
Max. boom
length at 5°
boom angle
97 ft 97 ft
(no load)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 13
Load chart
Hydraulic extension
90
6190 5260 4740 extended and vertical jacks set only.
(69) (73) (76)
6190 5130 4670 6. When lifting over the main boom nose
95
(68) (72) (74.5) withthe 56 ft extension erected and 20 ft
6090 5000 4610 insert, the outriggers must be fully extended.
100
(66.5) (70.5) (73)
105
5830 4880 4540 NOTE: Lifting with 33 ft extension base with
(65) (69.5) (71.5)
20 ft insert section installed is not permitted.
5100 4760 4480
110
(64) (68) (70.5)
4440 4650 4430
115
(62.5) (66.5) (69)
3840 4540 4380
120
(61) (65) (67.5)
3290 4150 4330
125
(59.5) (63.5) (66)
2780 3580 4220
130
(58) (61.5) (64)
2320 3060 3630
135
(56) (60) (62.5)
1900 2570 3080
140
(54.5) (58) (60.5)
1500 2130 2580
145
(52.5) (56) (58.5)
1140 1710 2110
150
(51) (54.5) (56.5)
1320 1680
155
(52.5) (54.5)
1270
160
(52.5)
Min. boom
angle for
indicated 50° 51° 51°
length
(no load)
Max. boom
length at 5°
boom angle
82 ft
(no load)
Max. boom
length at 5°
97 ft 97 ft
boom angle
(no load)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 15
Load chart
Hydraulic extension
110 4760 4480 6. When lifting over the main boom nose with
the 33 ft or 56 ft extension erected, the
115 4440 4430
outriggers must be fully extended.
120 3840 4380 NOTE: Lifting with 33 ft extension base
4150 with 20 ft insert section installed is not
125 3290
permitted.
130 2780 3580
155 1320
Min. boom
angle for
indicated 51° 51°
length (no
load)
Max. boom
length at 5°
boom angle
82 ft.
(no load)
80092368
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
16 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chart
Main boom
Pounds
Maximum boom length (ft) at 0° boom angle (no load) – Mode A and X 125.5
Maximum boom length (ft) at 0° boom angle (no load) – Mode B 111.1
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 17
Load chart
Main boom
Pounds
Maximum boom length (ft) at 0° boom angle (no load) - Mode A and X 125.5
Maximum boom length (ft) at 0° boom angle (no load) - Mode B 111.1
Pounds
30
*13,900
— — — — —
2. For main boom lengths less than 154
(80)
ft with the boom extension erected,
13,900 *7960
35 — — — — the rated loads are determined by
(79.5) (80)
40
13,900 *13,600
—
7960
— —
boom angle. Use only the column that
(78) (80) (79)
corresponds to the boom extension
13,900 13,600 7960
45 — — — length and offset for which the machine
(76.5) (79.5) (78)
13,900 13,600 11,750 7960 is set up. For boom angles not shown, use
50 — —
(75) (78) (80) (76.5)
13,900 13,600 11,600 7960 6700
rating of the next lower boom angle.
55 —
(73.5) (76.5) (78.5) (75.5) (80)
3. WARNING: Operation of this machine
13,900 13,550 11,450 7960 6450
60 — with heavier loads than the capacities
(72) (75) (76.5) (74) (79)
13,900 13,300 11,300 7960 6240 *5000 listed is strictly prohibited. Machine
65
(70.5) (73) (75) (72.5) (77.5) (80)
tipping with boom extension occurs
13,900 13,000 11,150 7600 6040 5000
70 rapidly and without advance warning.
(69) (71.5) (73.5) (71.5) (76) (79.5)
13,400 12,750 11,050 7190 5850 4900
75 4. Boom angle is the angle above or below
(67.5) (70) (71.5) (70) (74.5) (78)
80
12,000 12,450 10,950 6780 5660 4810 horizontal of the longitudinal axis of the
(66) (68.5) (70) (68.5) (73) (76.5)
boom base section after lifting rated load.
10,500 11,400 10,850 6450 5500 4730
85
(64.5) (66.5) (68) (67.5) (72) (74.5) 5. Capacities listed are with outriggers
9220 10,000 10,650 6120 5350 4650
90 properly extended and vertical jacks set
(62.5) (64.5) (66.5) (66) (70.5) (73)
95
8070 8810 9370 5860 5200 4580 only.
(60.5) (63) (64.5) (64.5) (69) (71.5)
7060 7720 8230 5600 5050 4510 6. When lifting over the main boom nose
100
(58.5) (61) (62.5) (63) (67.5) (69.5) with 33 ft or 56 ft extension erected, the
6150 6750 7220 5360 4920 4450
105
(56.5) (58.5) (60.5) (61.5) (66) (68) outriggers must be fully extended.
5330 5880 6300 5120 4800 4390
110
(54.5) (56.5) (58) (60) (64) (66)
4600 5090 5480 4930 4690 4340
115
(52.5) (54.5) (56) (58.5) (62.5) (64.5)
3930 4380 4730 4540 4590 4290
120
(50) (52.5) (53.5) (56.5) (60.5) (62.5)
3320 3720 4040 3940 4490 4240
125
(48) (50) (51) (54.5) (59) (61)
2760 3130 3410 3390 4230 4200
130
(45.5) (47.5) (48.5) (52.5) (57) (59)
2250 2580 2840 2880 3660 4160
135
(43.5) (45) (46) (50.5) (55) (57)
1770 2070 2310 2410 3140 3570
140
(41) (43) (43.5) (48.5) (52.5) (55)
1330 1600 1810 1980 2660 3030
145
(38.5) (40) (40.5) (46.5) (50.5) (53)
1170 1580 2210 2530
150 — —
(37.5) (44.5) (48.5) (50.5)
1210 1800 2060
155 — — —
(42.5) (46.5) (48)
1410 1630
160 — — — —
(44) (45.5)
1050
165 — — — — —
(42)
Min. boom angle
for indicated
36° 36° 38° 41° 41° 44°
length
(no load)
Max. boom
length at 0°
97 ft 97 ft
boom angle
(no load)
NOTE: ( ) Boom angles are in degrees. 80081443
*This capacity is based on maximum obtainable boom angle.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 19
Load chart
Manual extension
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
20 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chart
Hydraulic extension
85
10,500 11,400 10,850 6450 5500 4730 advance warning.
(64.5) (66.5) (68) (67.5) (72) (74.5)
90
9220 10,000 10,650 6120 5350 4650 4. Boom angle is the angle above or below
(62.5) (64.5) (66.5) (66) (70.5) (73)
horizontal of the longitudinal axis of the
8070 8810 9370 5860 5200 4580
95
(60.5) (63) (64.5) (64.5) (69) (71.5) boom base section after lifting rated load.
7060 7720 8230 5600 5050 4510
100
(58.5) (61) (62.5) (63) (67.5) (69.5) 5. Capacities listed are with outriggers properly
105
6150 6750 7220 5360 4920 4450 extended and vertical jacks set only.
(56.5) (58.5) (60.5) (61.5) (66) (68)
110
5330 5880 6300 5120 4800 4390 6. When lifting over the main boom nose
(54.5) (56.5) (58) (60) (64) (66)
4600 5090 5480 4930 4690 4340
withthe 33 ft or the 56 ft extension erected,
115
(52.5) (54.5) (56) (58.5) (62.5) (64.5) the outriggers must be fully extended.
3930 4380 4730 4540 4590 4290
120
(50) (52.5) (53.5) (56.5) (60.5) (62.5)
3320 3720 4040 3940 4490 4240
125
(48) (50) (51) (54.5) (59) (61)
2760 3130 3410 3390 4230 4200
130
(45.5) (47.5) (48.5) (52.5) (57) (59)
2250 2580 2840 2880 3660 4160
135
(43.5) (45) (46) (50.5) (55) (57)
1770 2070 2310 2410 3140 3570
140
(41) (43) (43.5) (48.5) (52.5) (55)
1330 1600 1810 1980 2660 3030
145
(38.5) (40) (40.5) (46.5) (50.5) (53)
1170 1580 2210 2530
150
(37.5) (44.5) (48.5) (50.5)
1210 1800 2060
155
(42.5) (46.5) (48)
1410 1630
160
(44) (45.5)
1050
165
(42)
Min. boom
angle for
indicated 36° 36° 38° 41° 41° 44°
length
(no load)
Max. boom
length at 5°
boom angle
97 ft 97 ft
(no load)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 21
Load chart
Hydraulic extension
Max. boom
length at 5°
boom angle
82 ft
(no load)
80092356
NOTE: ( ) Boom angles are in degrees.
*This capacity is based on maximum obtainable
boom angle.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
22 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chart
Hydraulic extension
160 1410
Min. boom
angle for
indicated 36° 38° 41° 44°
length (no
load)
Max. boom
length at 5°
97 ft 97 ft
boom angle
(no load)
80092363
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 23
Load chart
Hydraulic extension
110 4760 4480 6. When lifting over the main boom nose with
the 33 ft or 56 ft extension erected, the
115 4650 4430 outriggers must be fully extended.
120 4540 4380 NOTE: Lifting with 33 ft extension base
with 20 ft insert section installed is not
125 4180 4330
permitted.
130 3640 4280
165 1280
Min. boom
angle for
indicated 47° 47°
length (no
load)
Max. boom
length at 5°
82 ft
boom angle
(no load)
80092364
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
24 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Load chart
Pick and carry
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 25
Load chart
Stationary
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
26 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Rigging charts
Rigging chart Installation and removal of hydraulic removable Loading and unloading - on rubber
CWT on O/R’s fully extended (0 lb counterweight)
Radius Main boom length in feet Main boom length in feet
Radius
in feet 39.2 53.6 68.0 in feet 39.2
Tele I 0% 50% 50% Tele I 0%
Tele II 0% 0% 17% Tele II 0%
Tele III 0% 0% 17% Tele III 0%
Tele IV 0% 0% 17% Tele IV 0%
Mode X X X Mode X
195,000 5400
8 — — 12
(72.5) (66)
183,000 5400
9 — — 15
(71) (61)
172,500 136,500 55,500 5400
10 20
(69) (75.5) (78.5) (52)
152,000 136,500 55,500 5400
12 25
(66) (73) (77) (42)
124,500 123,000 55,500 5400
15 30
(61) (69.5) (74) (25)
90,250 89,000 55,500
20 Note: ( ) Boom angles are in degrees
(51.5) (63.5) (69.5)
55,600 52,600 54,650 Lifting capacities at
25
(40) (57) (65) Boom 0° boom angle
37,100 34,950 36,850 angle
30 39.2
(23.5) (50) (60)
4070
24,750 26,500 0°
35 — (31.7)
(42) (55)
17,850 19,800 Note: ( ) Reference radii in feet. 80089238
40 —
(32) (49)
12,750 15,100 NOTE: For loading and unloading, the
45 —
(16.5) (43) boom must be centered over front
Minimum boom angle (°) for indicated length (no load) 0 of machine and mechanical swing
Maximum boom length at 0° boom angle (no load) – X lock engaged.
68.0
mode
*This capacity is based on maximum boom angle
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GRT8100 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 27
Load handling
Lifting service, general travel and NOTE: When operating at temperatures below -40°F, capacities shall be derated
Size 3.6% of rated load for each degree Fahrenheit below -40°F without shock load.
(front and TRA Code extended travel
rear)
Static, creep and 2.5 mph (4.0 km/h)
Hoist performance
29.5 x 25 76
E-3 Hoist line pulls
(34) (5.2) Drum capacity (ft)
Two speed hoist
Wire
rope Low High
Line pulls and reeving information layer
Layer Total
Nominal Available lb Available lb
Permissible
Hoists Cable Specs. Cable
Line Pulls
Length
1 23,468 12,957 108.7 108.7
19 mm (3/4 in) 35x8 Class
Rotation Resistant 2 21,553 11,900 118.4 227.1
Main and (non-rotating) Min. 17,160 lb* 702 ft
Auxiliary 3 19,927 11,003 128.1 355.2
Breaking strength
85,800 lb
4 18,530 10,231 137.7 492.9
*Refer to Line Pulls and Reeving Information table for max. lifting capacity of wire
The approximate weight of 3/4 in wire rope is 1.5 lb/ft.
rope.
The appoximate weight of 22 mm synthetic rope is 0.21 lb/ft.
*With certain boom and hoist tackle combinations, the allowable line pull may be Synthetic rope layer height may vary and may reduce available line pull per layer.
limited by hoist performance. Refer to Hoist Performance table for lift planning to
ensure adequate hoist performance on drum rope layer required.
Rear axle
360° Centerline of 360°
Over side oscillation
outrigger support lockouts must
Centerline be set to
of boom maintain 360°
Boom capacities
Longitudinal centered
centerline over front
CG of load of crane
Over + + Over
front rear
Front
See note
at bottom
Bold lines determine the limiting position of any load for operation within working areas indicated.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
28 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Specifications
Superstructure
Cab
Operator-controlled 20° hydraulic tilt, full vision, all steel fabricated with
Boom acoustical lining and tinted safety glass throughout. Deluxe seat with headrest,
12 m – 47 m (39.2 ft – 154.3 ft) five-section, sequenced synchronized, incorporates armrest-mounted electronic programmable single-axis or dual axis
full-power boom with three operator selectable modes of extension and controllers and a jog dial for easier data input. Tilt/telescoping steering wheel
retraction. Any mode can be enabled or disabled to offer all modes or limited with various controls incorporated into the steering column. Other standard
mode depending on user or application usage. features include hot water heater, cab circulating air fan, sliding side and
Maximum tip height: 50 m (165 ft) opening rear window, sliding skylight with electric wiper and sunscreen, electric
windshield wash/wipe, fire extinguisher, seat belt, air conditioning and dual cab
mounted work lights.
*Optional manual bi-fold swingaway extension
10 m – 17 m (33 ft – 56 ft) bi-fold lattice swingaway extension. Offsettable at
0°, 20°, and 40°. Stows alongside base boom section. Electric motor assist for Swing
stowing and pin alignment. Variable speed, planetary swing drive with foot applied multi-disc proportional
Maximum tip height: 67 m (220 ft) wet brake. Spring applied, hydraulically released swing brake. Two position
mechanical swing lock pin, operated from cab.
Maximum swing speed: 2 rpm
*Optional hydraulic bi-fold swingaway extension
10 m – 17 m (33 ft – 56 ft) bi-fold lattice swingaway extension. Hydraulic
luffing offset from 0° to 40°. Stows alongside base boom section. Electric motor
assist for stowing and pin alignment. Hoist (main and auxiliary hoist)
Maximum tip height: 67 m (220 ft) Planetary reduction driven by axial piston motor. Grooved drum with
automatic spring applied multi-disk wet brake. Electronic hoist drum rotation
indicator. Third wrap indictor with hoist function cut-out standard. Maximum
*Optional lattice extension insert hoist single line pull:
(1) x 6 m (20 ft) lattice extension insert. Installs between boom nose and either
optional extension. 1st layer: 10 645 kg (23,468 lb)
Maximum tip height: 72,9 m (239.4 ft) 3rd layer: 9039 kg (19,927 lb)
6th layer: 7371 kg (16,250 lb)
Maximum permissible single line pull:
Boom nose 7620 kg (16,800 lb) with 35 x 7 class rope
Five Nylatron sheaves mounted on heavy-duty tapered roller bearings with Maximum hoist single line speed (no load):
removable pin-type guards. Quick-reeve type boom nose. Removable single 148 m/min (487 ft/min)
sheave auxiliary boom nose with removable pin type rope guard. Rope construction:
35 x 7 rotation – resistant
Rope diameter:
Boom elevation
19 mm (3/4 in)
One double-acting hydraulic cylinder with integral holding valve provides
Rope length:
elevation from -3° to +80°.
Main hoist: 214 m (702 ft)
Aux. hoist: 214 m (702 ft)
Crane Control System (CCS) Maximum usable rope:
“Graphic Display” RCL load moment and anti-two block system with 241 m (790 ft) 6 layers
audio-visual warning and control lever lockout. This system provides electronic
display of boom angle, boom length, load radius, boom tip height, maximum
permissible load, actual load and warning of impending two-block condition.
The work area definition system allows the operator to pre-select and define safe
working areas. If the crane approaches the pre-set limits, audio-visual warnings
aid the operator in avoiding job site obstructions. ECO mode system to control
engine R.P.M. to lower noise and improve fuel consumption.
Counterweight
Standard 9979 kg (22,000 lb). Hydraulically installed and removed.
Controls located on superstructure.
*Optional 12 247 kg (27,000 lb) one-piece counterweight. Hydraulically
installed and removed. Controls located on superstructure.
*Optional 2268 kg (5000 lb) pinned slab increases counterweight to 12 247 kg
(27,000 lb) hydraulically installed and removed with standard counterweight.
Grove GRT8100 29
Specifications
Carrier
Steering
Fully independent power steering.
Chassis Front: Fully hydraulic steering wheel controlled.
Parallel box section fabricated from high-strength, low-alloy steel with integral Rear: Fully hydraulic via separate momentary switch provides infinite variations
outrigger boxes, front and rear lift, tie-down, and towing lugs. 4 steering modes, front only, rear only, coordinated and crab.
Rear steer not aligned indicator.
Outrigger system Outside 4WS coordinated steer radius: 7,3 m (23.9 ft)
Four hydraulic telescoping single stage double box beam outriggers with Inside 4WS coordinated steer radius: 4,9 m (16.0 ft)
inverted jack cylinders and integral jack holding valves. Three position settings,
0%, 50%, and fully extended. Aluminum fabricated outrigger floats 609,6 mm
(24 in) diameter. Outrigger monitoring system with outrigger beam position Tires
display on R.C.L. screen. Maximum outrigger pad load: 57 290 kg (126,300 lb) 29.5 x 25 – 34 bias ply rating
Gradeability (theoretical)
Engine (Tier 4F)
Cummins QSB6.7L diesel six cylinder, turbo-charged with Cummins Compact 70% to drive train stall based on 55 763 kg (122,935 lb) GVW with 29.5 x 25
Catalyst (CCC) and selective catalytic reduction (SCR) combo muffler, using tires, standard counterweight, auxiliary hoist and manual bi-fold extension.
diesel exhaust fluid (DEF) injection. Meets emissions per U.S. EPA Tier 4F and
E.U. Stage IV. Miscellaneous standard equipment
275 hp (205 kW) at 2500 rpm, Maximum torque: 730 lb/ft (990 Nm) at Full length steel fenders with full aluminum decking, dual rear view mirrors,
1500 rpm. Fuel requirements: Maximum of 15 ppm ultra-low sulfur diesel fuel hook block tie-down, electronic back-up alarm, front stowage tray, hot water
+ diesel exhaust fluid (DEF). cab heater / defroster, cab air conditioner, hoist mirrors, hourmeter, A/V
NOTE: Required for sale in North America and European Union. warning system, combination lift/tie-down/towing lugs, coolant sight level
indicator, hoist access platform, CraneSTAR asset management system.
30
Symbols glossary
Extension
Boom length Hydraulic system Steering
Grove GRT8100 31
Manitowoc Cranes
Regional headquarters
Americas Europe and Africa China Middle East and
Manitowoc, Wisconsin, USA Dardilly, France - TOWERS Shanghai, China Greater Asia-Pacific
Tel: +1 920 684 4410 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Singapore
Fax: +1 920 652 9778 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Tel: +65 6264 1188
Shady Grove, Pennsylvania, USA Wilhelmshaven, Germany - MOBILE Fax: +65 6862 4040
Tel: +1 717 597 8121 Tel: +49 (0) 4421 294 0 Dubai, UAE
Fax: +1 717 597 4062 Fax: +49 (0) 4421 294 4301 Tel: +971 4 8862677
Fax: +971 4 8862678/79