Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Provisional Product Data Sheet

Version 1 (01/2015)

Sika®-Foam Lex
Building Construction Back Up Road

Technical Product Data


Chemical base Polyethylene Foam
Colour White
Compression strength 0.4 kg/cm
Density 0.035 g/cm
Tensile Strength 2.8 kg/cm
Heat Dislocation Temperature 80°C
0
Specific Heat 0.55 Kcal/kg C
Dynamic Stability Rate 98%
5
Coefficient of Linear Expansion 17 x 10
Thermal Conductivity 0.027-0.035 Kcal / m hr
0 0
C (20 C)
3
Water absorption <0.03 Mg/cm
1

Description Areas of Application


Sika®-Foam Lex is chemically Sika®-Foam Lex used at sealant
non-cross linked polyethylene and gasket material in various
foam with closed cells, expanded applications :
15 or 40 times. It is a light and - Curtain Wall
durable material with excellent - Windows and sash frames
shock absorbing and heat insula- - GRC
tion properties. Water-repellent - Precast Concrete
and highly resistant to weather- - Panels
proof and chemical. - Expansion joins for rooftop
- Tunnels
- Subway
- Bridges and automotives, etc
Method of Application Value Bases
Instruction: All technical data stated in this
Verify that the join is clean, mois- Product Data Sheet are based on
ture free and clear of obstructions laboratory tests. Actual measured
data may vary due to circumstan-
Select Sika®-Foam Lex in a diam- ces beyond our control.
eter that is approximately 25%
larger than the joint. Cut Sika®- Health and Safety Information
Foam Lex to the desred length or For information and advice regard-
dispense the rod directly from the ing transportation, handling, stor-
reel. age and disposal of chemical
products, users should refer to the
Position Sika®-Foam Lex in the Avoiding three-side adhesion actual Material Safety Data Sheets
join at the depth specified by the containing physical, ecological,
sealant manufacturer or architect. Three-side adhesion without Si- toxicological and other safety-
ka®-Foam Lex at join causes fail- related data.
Press Sika®-Foam Lex uniformly ure and sealant will tear (used hard
into the joint using a proper tool. materials and bonded sealant). Legal Notes
The information, and, in particular, the
Apply the sealant over Sika®- Adhesion only at two opposing recommendations relating to the appli-
Foam Lex following the sealant’s joints plus a Sika®-Foam Lex at cation and end-use of Sika products,
manufacturer. third side permits sealant to ex- are given in good faith based on Sika's
tended an compressed freely current knowledge and experience of
the products when properly stored,
handled and applied under normal
conditions in accordance with Sika's
recommendations. In practice, the
differences in materials, substrates and
actual site conditions are such that no
warranty in respect of merchantability
or of fitness for a particular purpose,
nor any liability arising out of any legal
relationship whatsoever, can be in-
ferred either from this information, or
from any written recommendations, or
from any other advice offered. The user
of the product must test the product’s
suitability for the intended application
and purpose. Sika reserves the right to
change the properties of its products.
The proprietary rights of third parties
must be observed. All orders are ac-
cepted subject to our current terms of
sale and delivery. Users must always
refer to the most recent issue of the
local Product Data Sheet for the prod-
uct concerned, copies of which will be
supplied on request.

PT. Sika Indonesia Branch


Jl. Raya Cibinong- Bekasi km. 20 Jl. KIG Raya Utara Kav. 3-4 Jl. Serbaguna (simp. Jalan Veteran)
Limusnunggal- Cileungsi Kawasan Industri Gresik Komp. Pergudangan Brayan Trade Centre
Bogor 16820 – Indonesia Roomo, Manyar 61151, Gresik-Indonesia No. 34 , Helvetia, Labuhan Deli,
Tel. +62 21 8230025 Tel. +62 31 3951633 Kabuaten Deli Serdang ,
Fax +62 21 8230025 Fax.+62 31 3951632 Sumatera Utara 20373
Website : idn.sika.com Tel. +62 61 8446697
e-mail: sikacare@id.sika.com +62 61 8446997
Fax +62 61 8446698

You might also like