PRODRAIN 10 is a draining membrane composed of an HDPE sheet with truncated cone reliefs and a non-woven polypropylene sheet permeable to water. It has high load resistance and drainage capacity. It is laid on properly sloped and waterproofed surfaces like concrete terraces and balconies, with the non-woven sheet facing upwards and rolls overlapped. The membrane resists saline solutions, acids, alkalis, alcohols and oils.
PRODRAIN 10 is a draining membrane composed of an HDPE sheet with truncated cone reliefs and a non-woven polypropylene sheet permeable to water. It has high load resistance and drainage capacity. It is laid on properly sloped and waterproofed surfaces like concrete terraces and balconies, with the non-woven sheet facing upwards and rolls overlapped. The membrane resists saline solutions, acids, alkalis, alcohols and oils.
PRODRAIN 10 is a draining membrane composed of an HDPE sheet with truncated cone reliefs and a non-woven polypropylene sheet permeable to water. It has high load resistance and drainage capacity. It is laid on properly sloped and waterproofed surfaces like concrete terraces and balconies, with the non-woven sheet facing upwards and rolls overlapped. The membrane resists saline solutions, acids, alkalis, alcohols and oils.
PRODRAIN 10 is a draining membrane In case of special and not-described applica-
composed of an high-density polyethylene tion, we suggest you to contact our techni- (HDPE) sheet and of a non-woven cal department. polypropylene sheet permeable to water. The cyan polyethylene sheet is provided LAYING INSTRUCTIONS with truncated cone reliefs, in the height of 10 mm, with circular bases. On the top of 1. Check that the substrate is properly Fig. 2 the circular bases a non-woven waterproofed an has an adequate slope to polypropylene gray sheet, permeable to ensure the flow of the drained water. water, is thermowelded. 2. Lay “PRODRAIN 10” on the waterproofing so that the non-woven grey sheet is facing TEXT TEMPLATE FOR TENDERS PRODUCT PLUS upwards. 3. Place the adjacent rolls, taking care to Delivery and installation of membrane • Higth load resistance overlap the exceeding non-woven sheet composed of an high-density polyethyle- • Higth drainage capacity with the roll previously laid. ne (HDPE) sheet and of a non-woven • Easy to lay 4. Lay the floor with irregular thickness on polypropylene sheet permeable to water. the fresh mortar that should have a The polyethylene sheet is provided with AREAS OF USE thickness of at least 4 cm or a layer of truncated cone reliefs, in the height of 10 rounded gravel with a thickness of at least 5 mm, with circular bases. On the top of the Use cm. circular bases a non-woven polypropyle- On properly sloped waterproofed concrete ne gray sheet, permeable to water, is like terraces, balconies and any horizontal thermowelded like PRODRAIN 10 of the structure and in contact with vertical water- company Progress Profiles. proofed structures as foundation wall before the filling of excavation. The mem- PDRI 10 : Draining membrane composed brane has an high resistance to saline of an high-density polyethylene sheet solutions, acids and alkalis, alcohols and oils. and of a non-woven polypropylene sheet permeable to water. Do not use On waterproofings without an adequate Roll height : _____________________ mt slope for the drained water flow. As Roll length : _____________________ ml soundproof and thermal insulation mem- Fig. 1 Material : _____________________ €/ml brane. Application : __________________ €/ml Total value : ___________________ €/ml PRODRAIN 10
TECHNICAL DATAS
Appearance Polymeric composed membrane
Colour Blue/grey Shelf life 24 months in a cool and dry place, avoiding direct sunlight and heat sources. Total thickness ≈ 10 mm Width ≈ 96 cm Roll length ≈ 12,5 mt Weight PP sheet ≈ 136 g / m2 Weight HDPE sheet ≈ 600 g / m2 Total weight ≈ 736 g / m2
PERFORMANCE HIGT – TECH
truncated cone reliefs ≈ 3.364 / m2
Air volume between the bulges ≈ 7,9 l / m2 Elongation to longitudinal break ≈ 30 % EN 12311-1 Elongation at transverse break ≈ 30 % EN 12311-1 Crack – Bridgin Ability (bonded system) ≥ 1 mm Operating temperature - 40° C / +80° C Drainage capacity ≈ 3,34 l/m2/s DIN EN ISO 12958:199 Water trasmission of geotexile layer ≈ 3,34 l/m /s 2
Compressive strenght ≈ 420 kN/m2 (42 t/m2)
Tensile strenght ≈ 17 kN/m DIN EN ISO 10319 Physiological properties Suitable for drinking water