Professional Documents
Culture Documents
Case Study
Case Study
University
Presented to
Conducted by:
April 2019
INTRODUCTION
Load flow analysis is a method of analysis used in power systems that one can use to
determine the amount of current and voltage a certain bus of the power system consumes per
given load.
Figure 1: Engineers at the control room performing tasks which would include the load
Short circuit analysis determines the amount of the fault current that will flow in a given
fault bus. Load flow and Short Circuit Analysis are a critical to any type of power system of a
certain institution. Institutions such as the Central Philippine University have a simple power
system that has two feeders providing the power for the institution. In this case study however,
the feeder two is chosen by the group of students to be subject to the study. The study aims to
determine any flaws in the feeder two of the school and apply any appropriate measures to
accidental power losses which has a grave impact upon its power budget and then therefore
would affect the overall financial stability of the institution. Frequent blackouts may be from
Figure 2: Loads such the Henry Luce III Library consume large amounts of power
FEEDER LINE 2:
13.8 kV
LOAD 5:
ADMIN BANK
LOAD 1: LOAD 2: LOAD 3: LOAD 4:
LIBRARY LDT BANK CHM ELEMENTARY
BANK BANK BANK
Objective:
The situation in the feeder two and the overall power system needs an electrical
assessment which may need actual and theoretical readings of the loads present in the feeder.
The loads will be then be subject to load flow and short circuit analysis, in order to determine
what may be the flow that is present in the system and be able to determine the maximum fault
The theoretical aspect of the feeder two is determined by the surveying of the team
building by building and determining the max loadings present in each building and ultimately
(pics of surveying)
The actual aspect of the feeder system is determined by utilizing the power logger on
each of the main nodes present in the feeder system. The power logger will determine the
average voltage, current, power, and other important electrical parameters needed for the
two system is shown below utilizing the ETAP software for the circuit calculations
REFERENCES
http://carelabz.com/what-why-load-flow-analysis-power-flow-analysis-done/
https://www.finduniversity.ph/universities/central-philippine-university/images/