Professional Documents
Culture Documents
Production Engineering
Production Engineering
Define:-
1. Secondary recovery: - is process of oil production by wells prepared for the
purpose of oil recovery after becoming unable to primary recovery.
The completion
The completion: Is the process of making a well ready for production or injection
Number ways the completion.
1. Open hole completion.
2. Perforated casing completion (close hole completion)
:مائع االكمال
حامض االستٌك-2
غاز النٌتروجٌن-3
1
Ahmed Alasadi
ٌتم االنتاج من خالل:
-3التثقٌب الهٌدرولٌكً
2
Ahmed Alasadi
عامل البشرة()skin factor
أْ أخفبع ٔفبرَت اٌّمطع إٌّخح حىي خىف اٌبئش أَب وبْ سببه َذعً ببٌخؼشس اٌطبمٍ وَعبش عٕه بعبًِ
اٌبششة اٌّىخب أِب اٌّعبٌدت ببحذي عٍُّبث االٔعبش أو اٌخٕشُؾ ِ stimulationثً االٔعبش ببٌخحُّغ و
االٔعبش ببٌخشمك اٌهُذسوٌٍ فٍغشع ِٓ االٔعبش ببٌخحُّغ هى اصٌت اٌخؼشس اٌطبمٍ اِب اٌغشع ِٓ
االٔعبش ببٌخشمُك اٌهُذسوٌٍ فهى ٌضَبدة إٌفبرَت ااالطٍُت ٌٍّىّٓ وهز اٌخحسٓ بٍٕفبرَت َذعً عبًِ اٌبششة
اٌسبٌب
هٕبن عذة عىاًِ حؤثش عًٍ اٌطبمت االٔخبخُت وِدّىعهب حسًّ عبًِ اٌبششة اٌىٍٍ وَشِض ٌهب
3
Ahmed Alasadi
– Dual porosity or layered behavior
4- Diagnose productivity problems
– Permeability
– Skin factor
5- Evaluate stimulation treatment effectiveness
– Skin factor
– Fracture conductivity
– Fracture half-length
هى فحض حٕبٍِ اٌؼغؾ حُث َدشٌ اٌبئش ٌفخشة ِٓ اٌضِٓ بّعذي خشَبْ ثببج حُث فخشة اٌدشَبْ حعخّذ
عًٍ اسخمشاسَت اٌبئش وفٍ ٔفس اٌٍحظت ٔمىَ بخسدًُ حغُش اٌؼغؾ وبعذ رٌه ٔمىَ بغٍك اٌبئش ٌدعً ِىخت
ّٓ اٌؼغؾ حظً حذود اٌّى.
ِٓاٌ ػغؾ لعش اٌبئش ِسخمش وبعذ رٌه َفخح اٌبئش ٌٍدشَبْ وَسدً ِعذي اٌدشَبْ واسخدببت اٌؼغؾ ِع اٌض
وٌىٓ اٌعبًِ اٌظعب فٍ هزا اٌفحض هى طعىبت اٌحظىي عًٍ ِعذي خشَبْ ثببج
4
Ahmed Alasadi
: ( )DRILL STEM TEST DST)( ًالفحص الطبق-3
هزا اٌفحض َسخخذَ ٌخمُُُ أو ححذَذ اٌطبلت اإلٔخبخُت ٌٍخىىَٓ اٌحبوٌ عًٍ اٌهُذسووبسبىٔبث ٌغشع أوّبي
اٌبئش.
:ٌستخذو الٌجبد
وفبرٌه انطبقه-1
حذود انمكمه-2
ضغىط انطبقه-3
ػبمم استخشاج انىفظ وانغبص مه انطبقه-4
اٌعمذة:حخخبس بُٓ ٔهبَخُٓ فٍ ٔظبَ االٔخبج او اٌحمٓ ِثً بُٓ اٌّىّٓ واٌعبصٌه حُث ٔسخفبد ِٓ ِفهىَ اٌعمذ
هى اَدبد اٌهبىؽ فٍ اٌؼغىؽ اٌزٌ َحظً فٍ ِٕظىِه االٔخبج ِٓ اٌّىّٓ اًٌ اٌعضالث.
The flow into the node is called INFLOW, while flow out of the node is
called OUTFLOW
انجشٌبن انى انؼقذة ٌسمى انجشٌبن انذاخم وانزي ٌخشج مىهب ٌسمى انجشٌبن انخبسج.
مه انشكم االتً والحظ انهبىط فً انضغىط حٍث فً كم ػقذة تؼىً هبىط فً انضغظ:
7
Ahmed Alasadi
8
Ahmed Alasadi
INFLOW - Inflow Performance Relations (IPR)
The intersection of IPR and TPC will give the flowrate of the system.
.وقطه انتقبطغ بٍىهمب تؼطً مؼذل انجشٌبن نهىظبو انزي ٌجب ان ٌىتح به وكزنك انضغظ نقبع انبئش
9
Ahmed Alasadi
Inflow Performance Relation (IPR)
Plotted as Pwf vs Q
Oil Wells
Below the bubble point, the flow rate Q usually drops off significantly
from the straight line relation at higher DP with two-phase flow.
Vogel Correlation
10
Ahmed Alasadi
Productivity Index (PI or J)
PI = Q / DP = Q / (Pres - Pwf)
Should not be extrapolated too far from the measured flow rate if used
for pressure below bubble point, Pb.
h - zone height, ft
11
Ahmed Alasadi
mo - oil viscosity, centipoise
Fetkovich Correlation
Q = J(Pres2 - Pwf2)n
12
Ahmed Alasadi
System Analysis:
For the system analysis, IPR and TPC are plotted together.
The intersection of IPR and TPC will give the flowrate of the system.
13
Ahmed Alasadi
-كٌف تمٌز بٌن دلٌل االنتاجٌة وادائٌه التدفق؟
ان ادائٌة التدفق تمثل العالقة بٌن ضغط الجرٌان عند قاع البئر و معدل االنتاج .اما دلٌل االنتاجٌة تمثل
المشتقة االولى الدائٌة التدفق فً الحالة الخاصة التً تكون فٌها االخٌرا خطا مستقٌما
-1منحنً فوكل :حدد ادائٌة التدفق بالنسبة لمكمن الدفع بالغاز المذاب وكذلك عندما ٌكون قٌمة كفائة
الجرٌان فً المكمن تساوي واحد اي ال ٌوجد تضرر
-2منحنً استاندنغ :تم اقتراح هذه الطرٌقة عند االخذ بنظر االعتبار االبار المتضررة بسبب الحفر و
االكمال او االبار المستصلحة بسبب التنشٌط
-3طرٌقة السعدون :استخدمة هذه الطرٌقة لتنٌؤ ادائٌة التدفق فً الحاضر و المستقبل
-4طرٌقه جلبرت :فً هذه الطرٌقة تم رسم ادائٌة التدفق على ورقة لوغارتٌمٌة
تعرف نسبة االنتاجٌة :وهً حاصل قسمة دلٌل االنتاجٌة لبئر حقٌقً على دلٌل االنتاجٌة لبئر مثالً وهو
كمؤشر للخسارة او الربح فً انتاجٌة بئر معٌن بعد اكمالة او تنشٌطة
Primary recovery
Primary recovery: - is recovery of oil by any of nature drive mechanisms.
Primary recovery mechanism
1. Rock and liquid expansion drive
2. Depletion drive
3. gas cup drive
4. drive
5. gravity drainage drive
6. combination drive
14
Ahmed Alasadi
Q: what is types of depletion drive
: 1. solution gas drive
2. dissolve gas drive
3. internal gas drive
15
Ahmed Alasadi
Hydrostatic pressure:- The pressure exerted a column of fluid in the
borehole. It is due to the column of drilling mud.
over pressure : - any pressure above the hydrostatic pressure .
Geothermal gradients
G = 100 (Tf – Ts ) / D
Where: D: depth Tf : formation temperature Ts : surface
temperature
Or:- Tf = Ts + (G /100) ×D
Darcy’s Law
Liquid flow in Laminar Flow through a permeable medium is
described by Darcy’s Law
16
Ahmed Alasadi
Productivity index:
A common indicator of liquid reservoir behavior is PI or
productivity index
– Referred to as “J”
Obtained by combining
– Continuity equation
– Equation of state for slightly compressible liquids
– Flow equation - Darcy’s law
17
Ahmed Alasadi
A = Cross-sectional area open to flow, ft2
= Rate of accumulation of mass within the volume, lbm/sec
v = Fluid velocity, ft/sec
= Density of fluid, lbm/ft3
c = Compressibility, psi-1
p = Pressure, psi
= Density of fluid, lbm/ft3
18
Ahmed Alasadi
A = Cross sectional area open to flow, cm2
k = Permeability, darcies
L = Length of flow path, cm
p = Pressure, atm
Pressure difference between upstream and
downstream sides, atm
q = Flow rate, cm3/sec
ux = Flow velocity, cm/sec
x = Spatial coordinate, cm
19
Ahmed Alasadi
Fluid compressibility:
Pore compressibility:
20
Ahmed Alasadi
• Units – fraction or %
Permeability:
is the measure of capacity of rock to transmit fluid.
• Symbol
–k
• Units
– Darcy or millidarcy (md or mD)
• Source
– Well tests, core analysis
The Ei-function solution to the diffusivity equation assumes line source well (finite
size of wellbore can be neglected).
This solution is valid only for r > rw .
It predicts the pressure response in the reservoir as a function of both time t and
21
Ahmed Alasadi
distance from the center of the wellbore r.
22
Ahmed Alasadi
Why Do We Test Wells?
23
Ahmed Alasadi
24
Ahmed Alasadi
25
Ahmed Alasadi
فحص اآلبار (:)WELL TESTING
هو فحص جرٌان الموائع وهو ٌجري على اآلبار النفطٌة أو الغازٌة لغرض الحصول على معلومات تخص البئر
والمكمن والفحص بصورة أساسٌة ٌتألف من تغٌر معدل جرٌان البئر واستجابة الضغط بالنسبة إلى الزمن كدالة
ولكن البٌانات التً تعتمد على التحلٌل بٌانات الضغط وٌدعى الفحص ()Transient Pressure Tests
26
Ahmed Alasadi
-1فحص تصاعد الضغط (:)BUILD UP TESTهو فحص تنامً الضغط حٌث ٌجري البئر لفترة من الزمن
بمعدل جرٌان ثابت حٌث فترة الجرٌان تعتمد على استقرارٌة البئر وفً نفس اللحظة نقوم بتسجٌل تغٌر الضغط
وبعد ذلك نقوم بغلق البئر لجعل موجة الضغط تصل حدود المكمن .
-2فحص تنازل الضغط ):) DRAWDOWNTESTهذا الفحص ٌجري عندما ٌكون البئر مغلق فً البداٌة اي
ضغط قعر البئر مستقر وبعد ذلك ٌفتح البئر للجرٌان وٌسجل معدل الجرٌان واستجابة الضغط مع الزمن ولكن
العامل الصعب فً هذا الفحص هو صعوبة الحصول على معدل جرٌان ثابت وكذلك ٌدعى هذا الفحص
(.)Reservoir limittest
-3فحص المتداخل (:)INTERFERENCE TESTهو فحص ٌجري على أكثر من بئر حٌث البئر الذي ٌعتمد فٌه
قٌاس معدل الجرٌان ٌسمى البئر الحقٌقً أما البئر الذي ٌعتمد فٌه قٌاس الضغط ٌسمى بئر المراقبة.
-4فحص الحقن( :)INJECTION TESTهذا الفحص ٌخص ابار الحقن حٌث هذه اآلبار تعامل كمعاملة فحص
اآلبار المنتجة وهو شبٌه بفحص تنازل الضغط .
:FALL OFF TEST -5هذا الفحص أٌضا ٌخص ابارالحقن وهو شبٌه بفحص تصاعد الضغط.
:STEP RATE TEST -6هو من الفحوصات التً تجري على أبار الحقن لغرض حساب
(.)Formation fracture gradient
:)DRILL STEM TEST DST ( -7هذا الفحص ٌستخدم لتقٌٌم أو تحدٌد الطاقة اإلنتاجٌة للتكوٌن الحاوي
على الهٌدروكاربونات لغرض أكمال البئر .
:PRODUCTION TEST -8هذه الفحص ٌستخدم أٌضا لتقٌٌم الطاقة اإلنتاجٌة للبئر وكذلك تحدٌد طاقة المكمن
أي من خالل نتائج الفحص نحدد أدائٌة جرٌان البئر (.)IPR
وكذلك توجد فحوصات أخرى تخص اآلبار الغازٌة مثل(.)Deliverability test-Isochronal test
27
Ahmed Alasadi
فحوصات الضغوط االنتقالٌة ()Analysis PressureTransient( )PTA
28
Ahmed Alasadi
الحل العام لتغٌر الضغط
القوانٌن الفٌزٌاوٌة للحل المعادلة
-معادلة المادة ( موازنة المادة )
--معادلة دارسً
-معادلة الحالة ( Compressibility Fluid (State Of Equation
29
Ahmed Alasadi
فترة الفحص االنتقالً
ٌمكن استخدام المعادلة التالٌة لحساب زمن الفحص االنتقالً فً حالة معرفة خواص الصخور والمائع لمكمن
ممٌز
t=(948*µ*Ø*ct*re^2)/K
تشٌر المعادلة أعاله الى انتهاء الجرٌان االنتقالً وبداٌة حالة الجرٌان
المزٌف( ) Pseudosteady state Flowلبئر فً منتصف مكمن دائري.
µo*Bo)/m*h*Qo*162.6(=k
حٌث mتمثل مٌل الخط المستقٌم ٌمكن الحصول علٌة من خالل رسم قٌم الضغط مع الزمن على
ورقة semilogوقٌمة kتمثل نفاذٌة الطبقة بوحدة ملً دارسً.
اذا كانت قٌمة sموجبة ٌدلل على تضرر البئر اما اذا كانت سالبة فانة ٌدلل على نجاح عملٌة انعاش البئر.
}s=1.151{(Pi-P1hr)/m-log(k/Ø*µ*ct*rw^2)+3.23
30
Ahmed Alasadi
.نطبق نفس المعادلة المستخدمة فً فحص تنازل الضغط لحساب نفاذٌة الطبقة
}s=1.151{(P1hr-Pwf)/m-log(k/Ø*µ*ct*rw^2)+3.23
well-( وتوجد معادالت اخرى ولكن تطبق على جارتات خاصة وٌدعى تحلٌل الفحص بهذه المخططات البٌانٌة
.)test analysis by ues of type curves
damage or stimulation.
31
Ahmed Alasadi
and applications.
note.
32
Ahmed Alasadi
33
Ahmed Alasadi
34
Ahmed Alasadi
35
Ahmed Alasadi
36
Ahmed Alasadi
37
Ahmed Alasadi
38
Ahmed Alasadi
39
Ahmed Alasadi
40
Ahmed Alasadi
41
Ahmed Alasadi
42
Ahmed Alasadi
43
Ahmed Alasadi
44
Ahmed Alasadi
45
Ahmed Alasadi
46
Ahmed Alasadi
47
Ahmed Alasadi
48
Ahmed Alasadi
49
Ahmed Alasadi
50
Ahmed Alasadi
51
Ahmed Alasadi
52
Ahmed Alasadi
1. As the DST tool is lowered down the hole, the hydrostatic tool
measures the increasing weight of the water/mud column in
pounds per square foot (PSI). After the tool reaches either total
depth (TD) or the desired depth of the test it is opened to
atmospheric pressure and a pressure drop is recorded almost
instantaneously. This is done to relieve the hydrostatic pressure
from the annular space within the tested interval.
53
Ahmed Alasadi
About 5 minutes in duration if the permeability is estimated
to be > 15 md.
If the pre-flow period is too short the hydrostatic pressure will not
be dissipated and the following shut-in period may be under the
influence of hydrostatic pressure.
At the end of the pre-flow period the tool is closed and the
pressure below the packer is allowed to build up. This is called the
initial shut-in pressure (ISIP).
54
Ahmed Alasadi
The duration of the final flow period (Main Flow) should be about 60 to
180 minutes, depending on conditions and estimated permeability. The
air blow at the surface will indicate whether formation fluid or gas is
entering the drill string. If gas flows to the surface a stabilized
measured rate is desirable for proper reservoir evaluation.
When the final flow period is concluded the tool is again closed
for a second shut-in period (Final Shut-in Period) which stops the flow
of fluid and gas into the drill string. The pressure below the packer is
then allowed to build. The duration of the Final Shut-In Period should
be about 1.5 to 2 times as long as the Main Flow (second flowing
period), depending again on conditions and estimated permeability. In
low permeable zones, longer shut-in times are necessary for proper
reservoir evaluation.
55
Ahmed Alasadi
unseated from against the borehole walls so the tool can be
recovered.
56
Ahmed Alasadi