Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

GALAXY 226

Galaxy Surfactants Ltd.


C-49/2, T.T.C Industrial Area, Pawne, Navi Mumbai - 400 703, INDIA
Tel. : (91 22) 2761 6666 / (91 22) 55904444
Fax : (91 22) 2761 5886 / (91 22) 2761 5583
Email : galaxy@galaxysurfactants.com
Website : http://www.galaxysurfactants.com

GALAXY 226

INTRODUCTION
Galaxy 226 is a cold processable, pumpable pearl shine concentrate with a typical faint odour.
INCI Name : Sodium laureth sulfate, , CAPB ,Glycol Distearate, Cocamide MEA (and)
Polyquat- 7

TECHNICAL SPECIFICATIONS

1 Appearance : Opaque Viscous liquid


2 Odour : Characteristic
3 Colour description : Pearly White
4 pH (10 % Solution) : 6.0 -7.0
5 ActIve matter, % by weight : 23 – 25
6 NaCl, % by weight : 2.0 max
7 Performance test To Pass Test
(50:50 soln, G226:H2O) ( To make Viscosity 3000-5000 cps by
addition of NaCl 2.0% max)

APPLICATIONS
The product is suited for the preparation of Pearle scent surfactant preparations. This product
can be blended with equal parts of water (50:50), the viscosity of the system has to be suitably
adjusted with salt. Common salt can be used. The salt levels should not exceed more than
2.0% and the same has to be added gradually. In the water added on could add any special
derivative one has to improve the product. The shampoo so made already is in built with
conditioners. In case you require more conditioning add external conditioners as desired.

Technical Data Sheet 1 of 2


GALAXY 226

Addition of colour and fragrance is done prior to salt addition. Fragrances used should be
suitable for shampoos (Non alcoholic) and food grade colours are recommended. Normally
0.5% of fragrance and around 20-30ppm of colour are sufficient to get desired results.
In case the end formulator desires to add any other active ingredient (herbal anti dandruff
agent) the same can added in this formulation at the desired dosage

PACKING
Galaxy226 is available in 200 kg barrels i.e. 16.0 MT palletized or non palletized can be sent
as one Full Container Load

HANDLING AND STORAGE

Property Attribute Minimum Maximum UOM Comment


Storage temperature - 5 40 oC

Shelf life total Days 365 days In original unopened


container

o
Recommended temperatures for handling and processing are 15-35 C. At temperatures below
o
5 C, the pumpability can suffer due to viscosity increase. This property is product specific; the
o
phenomenon can be reversed through tempering to 15 -30 C, if necessary with stirring.

During storage in metal containers Galaxy 226 can react corrosively. Therefore storage tanks
made of better quality or plastic are suitable for storing this product. At temperatures outside
the given range the pumpability may be restricted due to an increase in the viscosity.

The information contained in this literature is to the best of our knowledge reliable. However, nothing herein is to be construed as a warranty, expressed or implied, or
representation. Users should make their own tests to determine the applicability of such information or the suitability of any product for their own particular purpose. The buyer
assumes all risks of use and/or handling. Statements concerning the use of the product/s described herein are not to be construed as recommending the infringement of any
patent and no liability for infringement arising out of any such use is assumed.

Technical Data Sheet 2 of 2

You might also like