Professional Documents
Culture Documents
Anti-Reflux Box User Manual
Anti-Reflux Box User Manual
Anti-Reflux Box User Manual
, LTD
No.28 Guangming Road, Shiyan, Baoan District,
Anti-reflux Box User Manual
Shenzhen, P.R. China
T + 86 755 2747 1942
F + 86 755 2747 2131
E info@ginverter.com
W www.growatt.com
GR-UM-038-A-00
list
4 Common Faults
5 Specifications and
parameters
6 Contact
1 User Manal Information 2 Installation
1.1 Copyright Statement 2.1 The product shape
Distinguished users, thank you very much for your trust in our Anti reflux box
product, which is developed and manufactured by our R&D department. We sincerely
hope it can satisfy your need, also, we’re glad to receive your suggestions on
improving our product. The target of the manual is to provide the detailed product
information, installation, operation and maintenance.
Copyright No. is G1.0. Growatt reserved the final right of interpretation of this
manual. The product parameters, appearances and packages are subject to change
without notice. Readers are cautioned, however, that Growatt reserves the right to
make changes without notice and shall not be responsible for any damages,
including indirect, incidental or consequential damages, caused by reliance on the Figure 2-1 shape
material presented.
The user manual is applied for technicians and common users to install, debug and
maintain the Anti reflux box. The readers should be acquainted with some electrical
knowledge, electrical schematic and characters of electrical components. The
manual is not including the content of inverter, environment monitor, smart meter
and anti-flux device. If needed, please refer to other user materials of our company.
1.4 Guideline
Before using the Anti reflux box, please read the manual carefully. In the meantime,
please keep it well, lest maintenance staff may couldn’t find it later. All the content,
pictures, logos, symbols are reserved. No part of this document may be transmitted in
any form without the prior written permission of our internal staff. The content of
manual could be changed. Every attempt has been made to make this document
complete, accurate and up-to-date. If there are any differences between the contents
of the instruction and the product, please regard the actual one as the truth. You can Figure 2-2 The internal structure
download the newest version from our website www.growatt.com .
1 2
2.2 wiring instructions
With spiral knife turned on the anti reflux box panel, you can see wiring 2 ) Note that the inverter also has the following interface. Connection are
label. as follows:
1) Notice on current transformer wiring 3) The wire is directly inserted into the RJ45 port can be anti reflux box.
The wiring should be executed according to the picture above. On the Left is the grid,
and on the right is local load, current flows in from P1 and out from P2
3 4
3 operation and application
3.1 System block diagram
When reflux power exceeds 1KW (energy flow back to the grid, showed in minus
value on the display) the inverter starts to reduce its output power.
Load gets power from the grid higher than 2% of the inverter maximum capacity
(positive value displayed for power quantity), Webbox increases output of inverter.
5 6
3.2 shine webbox Operating
Enter the webbox IP address in web browser to open ShineWebBox page, click the
PARAMETER bar, input power meter address and change status to ON, then click save
as showed in figure 3-1, anti-reflux function started.
3.3.1 Module Address and Baud Rate Setting
The first page of setting menu is address and baud rate settings as shown in Figure
3.3. 001 indicates the address and can be set between 1 and 247; 06 indicates the
baud rate(The default is not set) ,Key functions of this page is: ESC key to go back to
electrical parameter acquisition display interface, ▲ key will minus 1 for flashing
digits, ▼ key will plus 1 for flashing digits, ► keys to move the flashing digits right,
ENT key to save the current settings and go to the next setup page.
Press ENT key on the previous page will take you to this voltage ratio and current Press ENT key on the previous page will take you to this current feed through
direction setting page as shown in figure 3.5.
ratio setting page as shown in figure 3.4.
A、B、C indicates different phase,0 on the right side indicates current feed
The first 0001 indicates the voltage change ratio which can be set between 1 and
through normally.1 indicates the phase current is reversely feeded in. Key function
1000, the 0001 below indicates current change ratio which can be set between 0001 on this page is: ESC to go back to electrical parameter acquisition display interface.
and 2000.key function on this page is: ESC to go back to electrical parameter ▲key will set 0 for flashing digits, ▼ key will set 1 for flashing digits, ► keys to move
acquisition display interface. ▲ key will minus 1 for flashing digits, ▼ key will plus 1 the flashing digits down, ENT key to save the current settings and go to the next
for flashing digits, ► keys to move the flashing digits right, ENT key to save the setup page.
current settings and go to the next setup page.
7 8
3.4 verification of anti reflux function
5 Specifications and parameters
The premise condition of anti reflux tank webbox to monitor the inverter General specification for
has been 5 minutes.
Method 1 : Verification of the most intuitive is off load, inverter power decreased
significantly in 20s. You can see the power inverter LCD screen display. Length * width * height 560* 415 *150(mm)
Method 2 : You can prevent Anti-reflux power mete interface of LCD active power P,
if P is a period of time are greater than 0, that has the effect of anti reflux. Or can also Net weight 11kg
use a shine server web page to see the Anti-reflux power mete data.
Recommend Method 1 .
The operating environment for
Place indoor
4 Common Faults
The communication mode Rs485 / Ethernet
1. meter display each phase has power anomaly, pay attention to check
thewiring is right or not.
2. there is no anti reflux effect, please check the address and so on not set.
6 Contact
3. shine server cannot see the inverter and the meter data. Please see the If you have technical problems concerning our products, please contact the
shine webbox manual. Growatt serviceline.
GROWATT NEW ENERGY
No.12 Building, Xicheng Industrial Zone, Bao’an District, Shenzhen,
P.R.China
www.growatt.com
Growatt Serviceline
Tel: +86 755 27471942
E-mail: service@ginverter.com
9 10