Professional Documents
Culture Documents
Pipe Fitting
Pipe Fitting
Pipe Fitting
A&N Corporation
707 Southwest 19th Avenue
Williston, Florida 32696
(352) 528-4100
1(800) FLANGE1
FAX (352) 528-3441
www.ancorp.com
ASA/ANSI
4.25 1.0 100ASA
FLANGES 6.00
7.50
2.0
3.0
200ASA
300ASA
Background
Insert O-ring
ASA/ANSI Flanges are available two general styles; fixed and rotatable. Fixed flanges have a set bolt hole
orientation while rotatable flanges have a two piece design allowing for bolt hole rotation to ease bolt
alignment when mating the two flanges. The two pieces of the rotatable ASA/ANSI flange are called the
insert and the housing (in which the bolt holes are machined). When installing these components the
housing is placed behind the insert on the tubing prior to welding the insert to the tubing. Both fixed and
rotatable flanges are available with an o-ring groove. All ASA/ANSI sealing assemblies must include 1
smooth face ASA/ANSI flange and 1 grooved face flange. The sealing o-ring is placed into the groove prior
to compressing the flanges together with a bolt kit. Flanges in this system are sized according to the nominal
internal diameter for the tubing onto which they will be welded. When adding new flanges to an existing
vacuum line, valve or chamber carefully compare all dimensions to be sure you are ordering a compatible
flange. The most important dimensions to consider are the bolt circle diameter and the internal diameter of
the flanges.
ASA/ANSI o-ring seals are made of Viton® elastomer. Viton® seals are capable of high vacuum pressures and
temperatures as high as 150˚C (200˚C intermittent use). The sealing ring is placed into the grooved flange
and compressed against the smooth sealing face of the mating flange. Viton® gaskets are re-usable and can
A&N Corporation be used many times to make new vacuum tight seals.
707 Southwest 19th Avenue
Williston, Florida 32696
ASA/ANSI Fasteners are bolts, nuts and washers made of high tensile strength stainless steel. Bolts and
(352) 528-4100 nuts are offered with standard hex-head design.
1(800) FLANGE1
FAX (352) 528-3441
www.ancorp.com A&N offers a complete line of flanges, fittings, valves, traps, and accessories with ASA/ANSI connections
that can be used to create a complete vacuum system or pumping line.
ASA/ANSI
Hardware
This elastomer sealed flange systems uses
bolt kits to fasten together your flanges and
Viton® elastomer o-rings to create a seal. In
addition to the standard fasteners and seals
adaptive hardware is available to meet the
needs of your specific application.
ASA/ANSI Fasteners
These bolt kits fasten two flanges together that both have clearance bolt holes.
The bolts slide easily through smooth bored bolt holes and are fastened with
a nut and washer on the far side of the flange assembly. These bolt kits are
offered in Hex-head bolt, nut and washer kits. *1
ASA/ANSI Seals
Viton® seals are a vacuum grade fluorocarbon elastomer o-rings that are
compressed between the two ASA/ANSI flanges to create a seal capable of
achieving high vacuum pressure. Viton® seals have a temperature range of
–20˚C up to 150˚C (200˚C intermittent use) and may be re-used many times
for re-installation of ASA/ANSI sealing assemblies. *2
*2 See pg.7.7 for sizes The adaptive bolt hole bushing reduces a 3/4” bolt hole down to a 3/8” bolt
and details. hole. This is commonly used to connect an ASA/ANSI flange (sizes 200, 300
*3 See pg.7.5 for or 400) to a gate valve with a matching flange. The ASA/ANSI flange on the
dimension sizes gate valve will have tapped bolt holes and require non-standard bolts available
and details;
on request. *3
pg.7.7 for prices.
A&N Corporation In the event that two smooth faced or grooved flanges come together in your
707 Southwest 19th Avenue system an adaptive gasket can save the day. A&N can provide either a thin
Williston, Florida 32696
smooth sealing face gasket or a thin gasket with o-rings on both sides. Both
(352) 528-4100
1(800) FLANGE1 gaskets are thin enough to allow the use of standard bolts to compress the
FAX (352) 528-3441
www.ancorp.com assembly. These problems are not common and therefore A&N does not stock
these components. *4
The A&N Adaptive Bolt Hole Bushing reduces any 3/4" bolt hole to 3/8" in diameter.
Commonly used to join most standard Gate Valves with ASA 200, ASA 300, ASA 400 flanges.
Viton® O-Ring
For ASA Flanges
Materials: • Temperature Range:
• Fluorocarbon -70˚C up to 150˚C
(intermittent use B
elastomer
to 200˚C)
Product Notes • Pressure Range: HV
• Multi-use seal (approx.1x10-8Torr)
A
PART REFERENCE STD UNIT
NUMBER NUMBER NUMBER A B PRICE
ASA/ANSI
Flanges
A&N Corporation manufactures flanges for our own
use as we manufacture modular fittings (tee’s, elbows
and nipples) valves, feedthroughs, chambers and other
components. We offer these same flanges for those
customers that have in-house welding capabilities
Part Numberto customize
and desire Reference Number or components
their system FLANGE 1 & 2 TUBE O.D. FLANGE 3 TUBE O.D. A B $98,145.45
4500423 LF63XQF40-T LF63 2.50 QF40 1.5 3.25 2.9 $180.00
themselves.
4500424 LF63XQF50-T LF63 2.50 QF50 2 3.25 3.4 $205.00
4500425 LF80XQF40-T LF80 3.00 QF40 1.5 3.5 3.15 $220.00
All A&N Corporation ASA/ANSI
4500426 LF80XQF50-T LF80 3.00 QF50 2 3.5 3.65 $235.00
flanges
4500427areLF100XQF40-T
manufactured to industry
LF100 specifications
4.00 to
QF40 1.5 4.13 3.65 $235.00
ensure compatibility
4500428 LF100XQF50-Twith otherLF100
manufacturer’s
4.00 flanges.
QF50 2 4.13 4.15 $250.00
Specifications Features
• Leak Rating < 1x10-9 std. cc/s helium • Rotatable flanges for easier
bolt hole alignment
• Temperature Range: -20˚C to 200˚C
• Adapters to other flange systems available
• Standard Sizes: 5" to 16" O.D.
(for tubing diameter 1" up to 12") • Interchangeable with other ASA/ANSI
style flanges made to industry standards
Materials:
• Flanges and Fittings: 304 Stainless Steel
These flanges are manufactured with a weld prep and tubing bore
for immediate installation on your system with no additional altera-
tion. Rotatable flanges have a two piece design allowing for bolt hole
rotation to ease bolt alignment when mating the two flanges. Both
fixed and rotatable flanges are available with an o-ring groove. All
ASA/ANSI sealing assemblies must include 1 smooth face ASA/ANSI
flange and 1 grooved face flange. Fixed and rotatable flanges have
clearance bolt holes. Clearance bolt holes allow for unrestricted pas-
sage of a bolt through the flanges. The bolt is then tightened with
a nut on the back side of the flange assembly. Standard ASA/ANSI
weld flanges are manufactured of 304 stainless steel.
Other materials are available on request. *6
capability for a special use. Rotatable flanges have a two piece design *8 See pp 7.11 - 7.25
allowing for bolt hole rotation to ease bolt alignment when mating for sizes and
additional details
the two flanges. Both fixed and rotatable flanges are available with
an o-ring groove. All ASA/ANSI sealing assemblies must include 1
smooth face ASA/ANSI flange and 1 grooved face flange. Fixed and
rotatable flanges have clearance bolt holes. Clearance bolt holes
allow for unrestricted passage of a bolt through the flanges. The bolt
is then tightened with a nut on the back side of the flange assembly.
Standard ASA/ANSI weld flanges are manufactured of 304 stainless
steel. Other materials are available on request. *8
100 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
150 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
200 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
300 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
400 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
600 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
800 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
1000 ASA -
Rotatable Flanges
BLANK BORED
A A
F C
B E B
D
F
ASA/ANSI Fittings
A&N Corporation’s ASA/ANSI fittings make up a com-
plete set of modular components that allow our cus-
tomers to create a custom vacuum system without the
trouble and expense of having in-house machining and
welding capabilities.
Specifications Features
• Leak Rating < 1x10-9 std. cc/s helium • Rotatable flanges for easier
bolt hole alignment
• Temperature Range: -20˚C to 200˚C
• Adapters to other flange systems available
• Standard Sizes: 5" to 16" O.D.
(for tubing diameter 1" up to 12") • Interchangeable with other ASA/ANSI
style flanges made to industry standards
Materials:
• Flanges and Fittings: 304 Stainless Steel
Half Nipples
These fittings are manufactured with a flange on one end and raw
For More Info... tubing on the other. Half nipples are often welded onto a custom
*9 See pp 7.28 - 7.29
vacuum system or instrument by a customer with in-house welding
for sizes and
capabilities. However, these fittings can also be used with Quick
additional details
Connect compression fittings to make a vacuum tight connection
*10 See pp 7.30 - 7.35
for sizes and without welding. (see Section 9 for our selection of quick discon-
additional details nect compression fittings) A&N manufactures standard Half Nipples
in 304 Stainless Steel, other materials are available on request. *9
Nipples
Elbows
Tees
Half Nipple
- Rotatable Flange
A
Materials: Options: Call for
• 304 Stainless Steel price and delivery
• Custom Lengths
Product Notes
• Butt weld • Alternative Materials
- 316 stainless steel,
• Designed to fit Aluminum, etc.
standard inch
tubing O.D.’s
• Highly Customizable
- O-ring groove
available (see
chart below)
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
150ASA $ 20.00 addition list below.
200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
300ASA $ 35.00
• Add to the end of the part number:
400ASA $ 35.00
"-G1" Groove Flange 1
600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
Flexible Nipple
- Fixed Fanges
Materials • O-ring groove
• Flanges available (see
chart below)
FREE LENGTH
- 304 Stainless Steel
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
A&N Corporation 150ASA $ 20.00 addition list below.
707 Southwest 19th Avenue 200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
Williston, Florida 32696 300ASA $ 35.00
(352) 528-4100 • Add to the end of the part number:
400ASA $ 35.00
1(800) FLANGE1 "-G1" Groove Flange 1
FAX (352) 528-3441 600ASA $ 50.00
"-G1/2" Groove both Flanges
www.ancorp.com 800ASA $ 55.00
1000ASA $ 60.00
Flexible Nipple
- Rotatable Flange 1
ROTATABLE
Materials • O-ring groove
• Flanges available (see
chart below)
FREE LENGTH
- 304 Stainless Steel
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
150ASA $ 20.00 addition list below.
200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
300ASA $ 35.00
• Add to the end of the part number:
400ASA $ 35.00
"-G1" Groove Flange 1
600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
Reducer Nipple
- Fixed Flanges
1
Materials Options: Call for
• 304 Stainless Steel price and delivery
Product Notes • Custom Lengths
• Connects different size • Conical Reducer Fitting A
ASA/ANSI Flanges • Custom Flange Combinations
• Both flanges have a fixed • Alternative Materials - 316
bolt hole orientation stainless steel, Aluminum, etc.
• O-ring groove available
(see chart below) 2
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
A&N Corporation
150ASA $ 20.00 addition list below.
707 Southwest 19th Avenue
Williston, Florida 32696 200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
(352) 528-4100 300ASA $ 35.00
1(800) FLANGE1 • Add to the end of the part number:
400ASA $ 35.00
FAX (352) 528-3441 "-G1" Groove Flange 1
www.ancorp.com 600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
Reducer Nipple
- Rotatable Flange FIXED
1
Materials Options: Call for
• 304 Stainless Steel price and delivery
Product Notes • Custom Lengths
• Connects different size ASA/ • Conical Reducer Fitting A
ANSI Flanges • Custom Flange
• One Fixed and one Combinations
Rotatable flange per fitting • Alternative Materials
• O-ring groove available - 316 stainless steel,
(see chart below) Aluminum, etc.
ROTATABLE
2
PART REFERENCE FLANGE 1 FLANGE 2 TUBE UNIT
NUMBER NUMBER O.D. O.D. O.D. A PRICE
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
150ASA $ 20.00 addition list below.
200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
300ASA $ 35.00
• Add to the end of the part number:
400ASA $ 35.00
"-G1" Groove Flange 1
600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
A
• 304 Stainless Steel
• Larger Sizes
Product Notes
• Radius elbow design • Custom Lengths
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
A&N Corporation 150ASA $ 20.00 addition list below.
707 Southwest 19th Avenue 200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
Williston, Florida 32696 300ASA $ 35.00
(352) 528-4100 • Add to the end of the part number:
400ASA $ 35.00
1(800) FLANGE1 "-G1" Groove Flange 1
FAX (352) 528-3441 600ASA $ 50.00
"-G1/2" Groove both Flanges
www.ancorp.com 800ASA $ 55.00
1000ASA $ 60.00
45˚ Elbow
- Rotatable Flange
ROTATABLE
Materials Options: Call for 1
• 304 Stainless Steel price and delivery
A
• Larger Sizes
Product Notes
• Radius elbow design • Custom Lengths
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
150ASA $ 20.00 addition list below.
200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
300ASA $ 35.00
• Add to the end of the part number:
400ASA $ 35.00
"-G1" Groove Flange 1
600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
A&N Corporation 150ASA $ 20.00 addition list below.
707 Southwest 19th Avenue 200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
Williston, Florida 32696 300ASA $ 35.00
(352) 528-4100 • Add to the end of the part number:
400ASA $ 35.00
1(800) FLANGE1 "-G1" Groove Flange 1
FAX (352) 528-3441 600ASA $ 50.00
"-G1/2" Groove both Flanges
www.ancorp.com 800ASA $ 55.00
1000ASA $ 60.00
90˚ Elbow
- Rotatable Flange
1
Materials Options: Call for
ROTATABLE
• 304 Stainless Steel price and delivery
• Custom Lengths
Product Notes
• Radius elbow design • Custom Flange
Combinations A
• One Fixed and one 2 R
Rotatable flange • Alternative Materials
per fitting (i.e. 316
stainless steel) FIXED
• O-ring groove available
(see chart below)
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
150ASA $ 20.00 addition list below.
200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
300ASA $ 35.00
• Add to the end of the part number:
400ASA $ 35.00
"-G1" Groove Flange 1
600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
A&N Corporation 150ASA $ 20.00 addition list below.
707 Southwest 19th Avenue 200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
Williston, Florida 32696 300ASA $ 35.00
(352) 528-4100 • Add to the end of the part number:
400ASA $ 35.00
1(800) FLANGE1 "-G1" Groove Flange 1
FAX (352) 528-3441 600ASA $ 50.00
"-G1/2" Groove both Flanges
www.ancorp.com 800ASA $ 55.00
1000ASA $ 60.00
ROTATABLE
Materials Options: Call for
• 304 Stainless Steel price and delivery
• Custom Lengths
Product Notes A
• One Fixed and one • Custom Flange
Rotatable flange Combinations
per fitting
• Alternative Materials 2 FIXED
• O-ring groove available (i.e. 316 stainless steel) A
(see chart below)
100ASA $ 20.00 Let us know which flange(s) to add the groove to by referencing the part number
150ASA $ 20.00 addition list below.
200ASA $ 20.00 Please Note: Adding a groove is customizing this product and is no longer returnable.
300ASA $ 35.00
• Add to the end of the part number:
400ASA $ 35.00
"-G1" Groove Flange 1
600ASA $ 50.00
"-G2" Groove Flange 2
800ASA $ 55.00
"-G1/2" Groove both Flanges
1000ASA $ 60.00
5-Way Cross
- Fixed Flanges 4
5-Way Cross
- Rotatable Flanges
FIXED
Materials Options: Call for 4
• 304 Stainless Steel price and delivery
• Custom Lengths 5
Product Notes
1 2
• Pulled ports for optimum • Custom Flange
vacuum performance Combinations
A
• One Fixed and one • Alternative Materials
Rotatable flange - 316 stainless steel,
Aluminum, etc.
3
per axis
A
• O-ring groove available ROTATABLE
(see chart below)
6-Way Cross
- Fixed Flanges 4
Flange 6 3
• Flanges have a fixed bolt • Alternative Materials (other side)
hole orientation - 316 stainless steel, A
Aluminum, etc.
• O-ring groove available
(see chart below)
6-Way Cross
- Rotatable Flanges
Flange 6 FIXED
Materials Options: Call for (other side) 4
• 304 Stainless Steel price and delivery
• Custom Lengths 5
Product Notes
1 2
• Pulled ports for optimum • Custom Flange
vacuum performance Combinations
A
• One Fixed and one • Alternative Materials
Rotatable flange - 316 stainless steel,
Aluminum, etc.
3
per axis
A
• O-ring groove available ROTATABLE
(see chart below)
Hybrid Adapters
A&N Corporation
707 Southwest 19th Avenue
Williston, Florida 32696
(352) 528-4100
1(800) FLANGE1
FAX (352) 528-3441
www.ancorp.com