Professional Documents
Culture Documents
Coil Storage Systems - Total
Coil Storage Systems - Total
Yo u r p a r t n e r i n s a f e c o i l s t o r a g e
World wide specialist in safe coil storage
It all started in 1981 when a local steel mill flexibility, extreme long lifetime and highly
wanted to improve safety in their coil experienced on-site product support and
warehouse by replacing old and venerable advice.
wooden chocks. Back then Lankhorst was
already a plastics producer and, after some Wide product range
engineering, the worlds’ first coil storage Over the past decades we have developed a
chock made from recycled plastics was vast range of coil storage and transport systems.
produced. It proved to be an excellent All these systems have been engineered in close
product: an enormous load bearing capacity cooperation with our customers – they are the
was combined with ductile, yet unbreakable experts in steel, we are the experts in plastics.
characteristics. Production takes place in our own production
facility, which is based in the city of Sneek in the
With over 30 years of experience, Lankhorst Netherlands.
Mouldings coil storage systems can be found all
around the globe. All major steel producers, Whether you want to store hot rolled, cold rolled,
steel processors and steel stockholders use galvanized, painted or tin-plate (slit) coils,
these storage systems with great success. whether you want to store them single level or up
Lankhorst Mouldings’ customers benefit from our to two or three levels – there is always a
wide product range that always offers the same Lankhorst Mouldings coil storage system that will
important features: improved safety, optimal fit your situation.
w w w. c o i l s t o r a g e . c o m
Te l . + 3 1 ( 0 ) 5 1 5 - 4 8 7 6 9 0
Your partner in safe coil storage
■ KLP® Rollblocks
w w w. c o i l s t o r a g e . c o m
Te l . + 3 1 ( 0 ) 5 1 5 - 4 8 7 6 9 0
World-wide specialist in coil storage
Turn-key
In Holland we say “what good is comes fast”. Why use KLP® RollStops System in
This is certainly the case for our KLP® your warehouse?
RollStop System. Developed back in 2005,
today already our most popular coil storage • One stop shop – one supplier for the
system chosen by all major steel companies complete system (turn-key)
world wide. • No steel profiles needed
• No special installation equipment needed
It is a turn-key storage system offering • Fast and easy installation – two men can
maximum flexibility and maximum safety. Coils do the job
may be stored up to three levels. The system • Easy three level stacking
consists of four simple components: rail, • Flexible for coil diameter and width
connector, spacer and KLP® RollStop – this • Improved safety for personnel
allows a very simple installation on-site. (TÜV-approved)
• Less damage to your precious coils
The interlocking system consists of a reinforced • Splinter proof
rail with notches on which the KLP® RollStops • Long lifetime
can be positioned. The distance between the • Enormous load bearing capacity
KLP® RollStops may vary depending on coil • No oil absorption
diameter. One size fits all! An extensive
installation manual will guide you through the
installation of the system on-site.
ROLLSTOP SYSTEM
solution for safe and flexible coil storage
We can supply two basic models of our KLP® 1 Use rails and steel
RollStops, depending on the weight of your coils. Each connectors to create
model can be supplied for various coil storage the desired row length.
situations: Use (end)spacers to set
the desired row width.
Tyyp e A p p lic at ion D i am et er M a xi m u m
c o i l s ( m m) l oa d ( t o ns )
u s ing
4 Roo llS toop s
RS100 Standard 700-2500 100 2 Place KLP® RollStops,
RS100 WR Outside storage 700-2500 100 depending on coil
RS100 HR Heat Resistant 700-2500 100 diameter.
up to 110°C
RS40 Standard 564-2500 40
RS40 WR Outside storage 564-2500 40
RS40 HR Heat Resistant 564-2500 40
up to 110°C
HR or ‘Heat Resistant’ RollStops may be used for coils 3 Place all spacers and
with temperatures up to 110°C. Our standard KLP® connect them to the rail
RollStops can withstand temperatures up to 60°C. - your storage system is
WR or ‘Weather Resistant’ RollStops have a special now ready for use!
coating preventing them from corrosion.
Our KLP® RollStop System is fully patented.
KLP® RollStop System:
the world standard since 2005
For flexible
KLP® ROLLBLOCKS
Since 1986, Lankhorst Mouldings have been Why use KLP® Rollblocks
marketing KLP® Rollblocks. From that in your warehouse?
moment, the Rollblock coil storage system
has become a standard for many steel • Improved safety for personnel
companies. (TÜV approved)
• Easy three level stacking
Our KLP® Rollblock System offers coil storage • Less damage to your precious coils
that is both safe and flexible. Rollblocks have to • Splinter proof
be placed into standard UNP-channels.The • Long lifetime
blocks have no fixed position; they can be moved • Enormous load bearing capacity
depending on the diameter of the coil - ideal if • Flexible and efficient
you have a variety of small and large coils. • No oil absorption
KLP® Rollblocks allow storage of coils with KLP® Rollblocks were developed in close co-
diameters ranging from 500 to 2500 mm. operation with the European steel industry.
The 28° chock angle offers maximum support Rollblocks comply with all industrial
and allows coil stacking up to three levels. requirements.
ROLLBLOCKS
storage of your coils
World-wide specialis t
coil storage
KLP® ROLLCRADLE SYSTEM
ROLLCRADLE SYSTEM
of your coils
t in
World-wide specialis
coil storage
K L P ® S T O R A G E B L O C K S & O I LT R AY S
Not all coils are stored in multiple levels. We offer our KLP® Storageblocks in a variety of
Sensitive material may not be stacked due to dimensions (see table). Chock angles up to 15°
the risk of damage. Sometimes regular coils allow optimal support for (slit)coils. KLP®
are stored temporarily awaiting further Oiltrays usually have a groove in the centre of
processing and slit coils are usually too the product. This allows the drainage of oil
narrow for stacking. which may drip from the coil.
For these applications Lankhorst Mouldings For storage of narrow strip we recommend the
have developed a wide range of KLP® use of a steel frame around our KLP®
Storageblocks and KLP® Oiltrays. These are V- Storageblocks or KLP® Oiltrays. More
shaped floor pads that can easily be installed in information upon request.
any warehouse. Sometimes they are fixed to the
floor, but this is not always necessary.
STORAGEBLOCKS
your (slit)coils
t in
P ro duc t Ty pe Le ng t h Wi d t h H ei g ht C ho ck a ng l e D i am et er M ax im um
( cm ) (mmm) (m
m m) ( m m) (°)) r a ng e ( m m ) l oad ( t o ns )
Storageblock 100 x 60 x 7 1000 600 70 7 500 - 2500 50
Storageblock 100 x 80 x 14 1000 800 145 15 500 - 2400 60
Storageblock HR 100 x 80 x 14 1000 800 145 15 500 - 2400 60
Oiltray 165 x 45 x 5 1655 455 55 5 500 - 2500 50
Oiltray 150 x 80 x 14,5 1500 800 145 12 500 - 2400 50
Oiltray* 150 x 45 x 5 1500 455 55 6 500 - 2500 50
Oiltray HR* 150 x 45 x 5 1500 455 55 6 500 - 2500 50
* available in three models.
HR = Heat Resistant up to 110°C.
World-wide specialis
coil storage
RESEARCH & DEVELOPMENT
QUALITY CONTROL
PRODUCT SUPPORT
Development and manufacturing of safe coil us how their coils, usually with a variety in
storage systems is an on-going process that diameters, should be stored on our blocks. As
needs strong Research & Development and such a question cannot always be answered
Quality Control departments. Our engineers easily we have developed our KLP® Coilstacker
use 3D CAD systems and finite element software.
analyses for new developments. During and
after manufacturing our quality engineers KLP® Coilstacker allows a simple yet effective
regularly perform high pressure tests to simulation of your Lankhorst coil storage system
ensure that all of our products comply with and your coils. You define the coils (diameter +
the highest standards. weight) and the program will show you whether
the stacking is safe or not. It will also tell you
KLP® Coilstacker software how many coils may be stored per row, giving
Most of our storage systems allow two or three you easy insight into your total warehouse
level stacking of coils. Safety certificates, capacity.
issued by German health and safety authority
TÜV, ensure safety in the warehouse while using KLP® Coilstacker software is available free of
our systems. However, our customers often ask charge for all of our customers!
t in
Instant advice on safe coil storage
In this brochure you will find a variety of coil storage To further assist you choosing the best solution for your
solutions, each with its own characteristics. To choose situation you can find a questionnaire on our website -
the best solution for your coil warehouse the following if you fill out this form online and send it to us we will
details may be very important: get back to you instantly with our free advice. Our
engineers’ helpdesk is always available for instructions
• Master coils or slit coils and special storage configurations.
• Single level coil storage or stacking up to two or
three levels
• Average coil diameter
• Average coil weight
• Coil temperature
• Covered warehouse or outside storage
www.coilstorage.com
World-wide specialist
in coil storage
LANKHORST MOULDINGS
ALL OVER THE WORLD
Our coil storage systems can be found all Besides the home office we have local
over the globe. It is our goal to offer our representatives and stockholders in many
customers the best possible service, world countries like Austria, Spain, UK, Scandinavia,
wide. Therefore we have a team of highly Italy, Turkey, Greece, Poland, USA, Canada,
qualified (sales) engineers in our office in Mexico, Brazil, Egypt, South Africa, India,
Sneek, the Netherlands. Russia, China, Japan, Korea, Malaysia and
Australia.