This document calculates the maximum scour depth for a hydraulic structure. It first calculates a silt factor of 1.76 based on the weighted mean diameter of bed material. It then calculates the maximum discharge velocity, depth of water, and discharge per meter width. Using these values and the silt factor, it calculates the mean scour depth as 3.993 meters. Per IRC guidelines, the maximum scour depth is taken as twice the mean, which is 7.986 meters.
This document calculates the maximum scour depth for a hydraulic structure. It first calculates a silt factor of 1.76 based on the weighted mean diameter of bed material. It then calculates the maximum discharge velocity, depth of water, and discharge per meter width. Using these values and the silt factor, it calculates the mean scour depth as 3.993 meters. Per IRC guidelines, the maximum scour depth is taken as twice the mean, which is 7.986 meters.
This document calculates the maximum scour depth for a hydraulic structure. It first calculates a silt factor of 1.76 based on the weighted mean diameter of bed material. It then calculates the maximum discharge velocity, depth of water, and discharge per meter width. Using these values and the silt factor, it calculates the mean scour depth as 3.993 meters. Per IRC guidelines, the maximum scour depth is taken as twice the mean, which is 7.986 meters.
This document calculates the maximum scour depth for a hydraulic structure. It first calculates a silt factor of 1.76 based on the weighted mean diameter of bed material. It then calculates the maximum discharge velocity, depth of water, and discharge per meter width. Using these values and the silt factor, it calculates the mean scour depth as 3.993 meters. Per IRC guidelines, the maximum scour depth is taken as twice the mean, which is 7.986 meters.
Ksf = 1.76 √dm (As per clause No. 703.2.2 of IRC:78 - 2014) dm = weighted mean diametre of bed material in milimitre. = 1 mm Ksf = 1.76
CALCULATION OF SCOUR DEPTH :
V = Maxm Discharge Velocity = 4.40 m/sec d = Depth of water consider for unit discharge = 8 m Db = Discharge per Metre width of waterway = AxV = 35.2 cumecs = 45.76 cumecs Increase of 30% over Design Discharge (Vide clause No. 703.1.1 of IRC:78 - 2014)
MEAN SCOUR DEPTH (dsm)
dsm = 1.34 (Db / Ksf)⅓ (As per IRC: 78-2014) dsm = 3.993 m 2 dsm = 7.986 m (Vide cl. No. 703.3.1.1 of IRC:78 - 2014) Dmax = 7.986 m Maxm Scour depth from HFL 3.192