Parvez Ramteke, an employee at Uttam Galva Metallics Limited, had a near miss incident at the coke oven area. While checking tie rods after reversing, his trousers got caught on a corner of a tool, causing him to fall down. To prevent future incidents, it was suggested that the tools be replaced with a single rounded tool and that technicians ensure visibility in all directions. The report was received and investigated by safety officials.
Parvez Ramteke, an employee at Uttam Galva Metallics Limited, had a near miss incident at the coke oven area. While checking tie rods after reversing, his trousers got caught on a corner of a tool, causing him to fall down. To prevent future incidents, it was suggested that the tools be replaced with a single rounded tool and that technicians ensure visibility in all directions. The report was received and investigated by safety officials.
Parvez Ramteke, an employee at Uttam Galva Metallics Limited, had a near miss incident at the coke oven area. While checking tie rods after reversing, his trousers got caught on a corner of a tool, causing him to fall down. To prevent future incidents, it was suggested that the tools be replaced with a single rounded tool and that technicians ensure visibility in all directions. The report was received and investigated by safety officials.
Department: Coke Oven (Heating) Date & Time: 23/07/18 06:50 PM Description of Near Miss: Site of incident: - Battery 01 C/S draught area near between inclined manometer and PT. During “B” shift, Mr. Parvez Ramteke after reversing he went to check the tie rod of coke side in Batt#01 on the way of returning his lower side of trouser tag with the corner of the tool and he fell down.
Remedial measures suggested:
1. The both tools must be replaced by new one single tool and its corner must be in round shaped. 2. The technicians were advised to ensure six directional sight.
Signature (Optional):- Abdul Matin Ansari
(For safety Department official use only)
Received on ………../……../20 Sr. No……………………………………………………………….
Investigated by Mr. ……………………………………………………………………. On ……………………………………………
Investigation Report attached.
Signature of HOS (Safety) HOD of Concerned Department