Professional Documents
Culture Documents
Kedah-Skema P2
Kedah-Skema P2
Jawapan : No. 1
a) – choose the right electrode size and electric current rating for the work piece
- hold the work piece with a suitable clamp
- for stronger joint, provide a groove for filler metal.
- start the arc by tapping the tip of the electrode to the base metal
- weld a few spots on the work piece in order to hold the work piece.
- start welding by maintaining the proper arc gap or distant along the joint length
- leave the work piece to cool down, next, knock the joint to remove the slack.
- clean up the work piece using a metal brush.
1 x 1 = 8 marks
b)
ADVANTAGES DISADVANTAGES
OXY - ACETYLENE ARC WELDING
C)
ARC WELDING OXY - ACETYLENE
- joint by heat from electric arc - joint by heat of flame which is
between electrode and work produce by oxygen and acetylene.
piece - Didn’t used any power supply
- electrode with flux as a filler metal - Thin diameter of filler rod.
- use an electricity as a power
supply
d) - soldering
- brazing
- adhesive
(mana-mana 2x1 M)
Jawapan : No. 2
2. a) X - Penerima FM
Y – Penghantar FM
Z – Penggabung
( Setiap jawapan 2 x 3 = 6 markah)
b) Denyut
Segerak Denyut
Padaman
Isyarat
Video
(4 Markah)
Jawapan : No. 3
Intermediae
Back Sight Fore Sight Reduced
Sight Rise Fall Chainage Remark
Pandangan Pandangan Level
Pandangan Naik Turun Rantaian Catatan
Belakang Hadapan Aras Laras
Antara
F
C
B D E
A
Imaginary
datum
Datum
khayalan
= 74.000
74.930
75.210
75.410
75.210
75.130
75.650
76.200
Reduced Level
Aras Laras
0.00
100.00
20.00
40.00
60.00
80.00
120.00
Chainage
Rantaian
x
- Plot mana-mana 5 titik = 1 markah X 5 titik (5 markah)
- Jawapan : No. 5
Safety Bracket
Pendakap Keselamatan
[4 marks]
Tangga
Ladder
[4 marks]
Book Shelf
Rak Buku
Roller
Roda
[4 marks]
ii. Aluminium
[2 marks]
iii.Light, Good workability, Easy to forge, Easy to machine, Easy to cast, Resist corrosion
- Any 2 answer [2 marks]
Jawapan : No. 6
a. i. Enjin 4 lejang, ii. Enjin 2 lejang, iii. Enjin Diesel.
b. i. Lejang Mampatan
ii. Lejang kuasa dan ekzos
iii. Lejang masukan
c.
E. 4 lejang E. 2 lejang E. Diesel
Kebaikan - Kuasa keluaran tinggi -Daya kilas tinggi -Kos lebih murah
- Kos penyenggaraan -Kos penyenggara
rendah an rendah
Kelemahan -Daya kilas rendah - Kuasa keluaran - Memerlukan bahan
- Kos penyenggaraan tinggi rendah binaan enjin dapat
- Banyak asap menahan tekanan
ekzos tinggi
Jawapan : No. 7
PL
PM1
PH1 GBL1 GBL 2
P1
P1
PM2
PH2
P2
P2
P1 Yellow
P1 P2 Green
P1 P2 Red