Professional Documents
Culture Documents
Laboratory Manual: CAM 3 - Core & Cavity Design - Injection
Laboratory Manual: CAM 3 - Core & Cavity Design - Injection
Laboratory Manual: CAM 3 - Core & Cavity Design - Injection
2
Prerequisites
To complete the task you need to have the model named: CCDmodel.CATPart.
You should download or receive by e-mail the file CCDmodel.stp . Open it
in Part Design module. System will transform the file to the CATPart format.
Save the transformed file.
3
Preparatory activities
1. Open new folder named Core & Cavity Design and save CCDmodel CATIA
Part in it.
2. Open the new file of type Product and save it in the just created folder
with the name Product1
3. Click Product1 in the specification tree and choose module Core & Cavity
Design
4. Find Import Model (on the right side) and apply to the file CCD.CATPart
Check carefully !
The imported model is presented in the tree with the
name: MoldedPart.
4
Main Pulling Direction
5
Direction in Slider Area
6
Explode View
7
The Cavity – preparatory activities
8
Parting Surfaces (1)
10
Parting Surfaces (3)
Change
operation
In the same way
make surfaces by
the three remaining
arcs of the model's
edge.
Back to
Extrude
2
12
Parting Surfaces (5)
13
Parting Surfaces (6)
Click
Sweep
Then
Profile and then OK
Guide curve
Do the same on
the other side
of the „tunel”
14
Conjoining the surfaces
15
Checking the surface
16
Cutting the surface (1)
17
Cutting the surface (2)
Choose
Extrude
Build a surface with
data given below
18
Cutting the surface (3)
Use Split with data shown in the figure. If needed, click Other side
to remove the outer part of the surface. Then OK.
Hide a cutting surface.
19
Moving the surface to the Cavity.1 (1)
Choose
Copy
Click
20 OK
Moving the surface to the Cavity.1 (2)
21
Aggregating the element Cavity.1 (1)
22
Aggregating the element Cavity.1 (2)
23
Modeling the Core
24
The surface of Core.1
25
Modeling the Slider/Lifter (1)
26
Modeling the Slider/Lifter (2)
27
Modeling the Slider/Lifter (3)
Press OK.
The system will automatically
merge created elements into one
Join and will hide original
elements.
28
Modeling the Slider/Lifter (4)
29
The final result of the task completion
The task is
completed.
Compare results.
30
Summary.
31
Good Luck !
32