Professional Documents
Culture Documents
Technical Information Leaflet
Technical Information Leaflet
Technical Information Leaflet
PRODUCT NAME
DC-41 PP INK
PRODUCT SPECIFICATION
Ink Type : Single–component PP ink
Viscosity : 180-200p
Gloss : 75-85
Fluidity : 15-20mm/s
APPLICATION
Application Condition : 25 – 35 °C , 60 - 80% RH
Screen Type : 61T-120T polyester screen printing (ink except gold,silver,pearl powder
deployment of)
Network board wash : Use of organic solvent cleaning ( such as : was water network S-718)
PRECAUTION
1. Before using the ink and curing agent Stir immediately closed after use;
2. The need to add 15% -20% of a diluent for dilution;
3. Construction pieces before construction should remove surface grease and dirt;
4. need trapping, should the previous color is dry or hard work carried out after chromatography;
5. The MASTEK ink is only available to the reallocation of ink series, not mix other types of ink;
6. Add the ink curing agent to be completed within 6-8 hours of use, in order to avoid hardening, the
best is to estimate how much you can use half a day with a good number of oil;
7. Network board should immediately wash clean when not printing, the ink can not pour left over not
with ink in order to avoid hardening
FLOW PROCESS CHART