Professional Documents
Culture Documents
Bridge Deck: Steel Is Our Business
Bridge Deck: Steel Is Our Business
Material Supply :
- Supply re-colled coil conforming to ASTM A 572 / A 572 M-94C grade 50
- Thickness 4.5 mm
- Carbon equivalent (CE) shall not exceed 0.43
- Tensile Strength shall not exceed 580 N/mm2
- Minimum content of Silicon shall be 0.15%
- Mill certificates shall be supplied for all steel produced
Manufacturing :
- Slit and cut coil to suit
- Roll form and punch plates as shown on drawings 311-D-604 and 311-D-605 (see attached). In
accordance with plate
schedule for Gunung raja Paksi (see attached).
- Part Mark DSA. 3.195 deck sheets required, total weight 543.470 tonnes.
- Part Mark DSB. 5.900 deck sheets required, total weight 780.570 tonnes.
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail (62-21) (62-21) (62-21) (62-21)
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
WIDTH WEIGHT
THICKNESS LENGTH
MATERIAL SHEET
PART NO. TYPE
mm mm mm Kg
ERC-01 Exterior Ridge Cap 400 0.45 3000 4.44
IRC-01 Interior Ridge Cap 300 0.45 3000 3.33
DTM-01 Drip Trim 200 0.45 3000 2.22
GTM-01 Gable Trim 372 0.45 3000 4.14
ETM-01 Eave Trim 270 0.45 3000 3.00
RFL-01 Roof Flashing 150 0.45 3000 1.68
CTM-01 Corner Trim 180 0.45 3000 2.01
HTM-01 Head Trim 173 0.45 3000 1.92
FTM-01 Flashing Trim 240 0.45 3000 2.67
CLT-01 Closure Trim 234 0.45 3000 2.61
CFL-01 Cap Flashing 502 0.45 3000 5.58
OCT-01 Outside Corner Trim 220 0.45 3000 2.43
OCT-02 Outside Corner Trim 333 0.45 3000 3.69
STM-01 Sill Trim 248 0.45 3000 2.76
SET-01 Soffit Edge Trim 175 0.45 3000 1.96
CABLE TRIM
372
GTM-01 0.45 3000 4.14
(460)
EAVE TRIM
CAP FLASHING
372
CLF-01 0.45 3000 4.14
(460)
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
Copyright © 1997-2003 Advanced Marketing 2000, All Rights Reserved
C-Channel PT. GUNUNG RAJA PAKSI
COLD FORMED Steel Is Our Business
METRIC SIZE
THICK SECTION CENTER OF CENTER OF MOMENT OF RADIUS OF MODULUS OF
DIMENSION UNIT
NESS AREA GRAVITY SHEAR INERTIA GYRATION SECTION
WEIGHT
HxB t A Cx Cy Sx Sy Ix Iy ix iy Zx Zy
mm x mm mm kg/m cm2 cm cm cm cm cm4 cm4 cm cm cm3 cm3
80 x 35 4.0 4.30 5.47 0.00 1.00 2.04 0.00 49.74 6.14 3.01 1.06 12.44 2.45
2.0 2.41 3.07 0.00 1.09 2.49 0.00 30.85 4.90 3.17 1.26 7.71 1.68
2.5 2.98 3.79 0.00 1.11 2.48 0.00 37.57 5.99 3.15 1.26 9.39 2.08
80 x 40 3.0 3.54 4.50 0.00 1.14 2.47 0.00 43.92 7.03 3.12 1.25 10.98 2.46
4.0 4.61 5.87 0.00 1.18 2.46 0.00 55.52 8.97 3.07 1.24 13.88 3.19
5.0 5.63 7.18 0.00 1.23 2.44 0.00 65.72 10.73 3.03 1.22 16.43 3.88
3.0 3.77 4.80 0.00 1.33 2.91 0.00 48.37 9.76 3.17 1.43 12.09 3.08
80 x 45 4.0 4.93 6.27 0.00 1.38 2.89 0.00 61.30 12.50 3.13 1.41 15.33 4.01
5.0 6.03 7.68 0.00 1.43 2.88 0.00 72.76 15.00 3.08 1.40 18.19 4.88
2.5 3.37 4.29 0.00 1.51 3.35 0.00 45.08 11.09 3.24 1.61 11.27 3.18
3.0 4.01 5.10 0.00 1.53 3.35 0.00 52.82 13.07 3.22 1.60 13.20 3.77
80 x 50 4.0 5.24 6.67 0.00 1.58 3.34 0.00 67.08 16.78 3.17 1.59 16.77 4.91
5.0 6.42 8.18 0.00 1.63 3.32 0.00 79.80 20.19 3.12 1.57 19.95 5.99
5.5 6.99 8.91 0.00 1.66 3.32 0.00 85.61 21.78 3.10 1.56 21.40 6.51
80 x 55 4.0 5.55 7.07 0.00 1.79 3.79 0.00 72.87 21.86 3.21 1.76 18.22 5.89
2.5 3.76 4.79 0.00 1.93 4.25 0.00 52.59 18.27 3.31 1.95 13.15 4.48
3.0 4.48 5.70 0.00 1.95 4.25 0.00 61.72 21.56 3.29 1.94 15.43 5.33
80 x 60
4.0 5.87 7.47 0.00 2.00 4.24 0.00 78.65 27.81 3.24 1.93 19.66 6.96
5.0 7.20 9.18 0.00 2.05 4.23 0.00 93.89 33.60 3.20 1.91 23.47 8.51
80 x 65 4.0 6.18 7.87 0.00 2.22 4.70 0.00 84.43 34.67 3.27 2.10 21.11 8.10
80 x 70 5.0 7.99 10.18 0.00 2.49 5.16 0.00 107.97 51.52 3.26 2.25 26.99 11.42
3.0 5.42 6.90 0.00 2.83 6.11 0.00 79.51 47.24 3.39 2.62 19.88 9.13
80 x 80 4.0 7.12 9.07 0.00 2.88 6.10 0.00 101.77 61.27 3.35 2.60 25.44 11.97
5.0 8.77 11.18 0.00 2.94 6.10 0.00 122.05 74.45 3.30 2.58 30.51 14.71
METRIC SIZE
THICK SECTION CENTER OF CENTER OF MOMENT OF RADIUS OF MODULUS OF
DIMENSION UNIT
NESS AREA GRAVITY SHEAR INERTIA GYRATION SECTION
WEIGHT
HxB t A Cx Cy Sx Sy Ix Iy ix iy Zx Zy
mm x mm mm kg/m cm2 cm cm cm cm cm4 cm4 cm cm cm3 cm3
80 x 85 4.0 7.44 9.47 0.00 3.11 6.58 0.00 107.55 72.31 3.37 2.76 26.89 13.41
90 x 35 4.0 4.61 5.87 0.00 0.94 1.94 0.00 66.16 6.38 3.36 1.04 14.70 2.50
90 x 40 4.0 4.93 6.27 0.00 1.12 2.35 0.00 73.56 9.34 3.42 1.22 16.35 3.25
90 x 45 4.0 5.24 6.67 0.00 1.31 2.78 0.00 80.96 13.03 3.48 1.40 17.99 4.08
4.0 5.55 7.07 0.00 1.50 3.21 0.00 88.36 17.50 3.53 1.57 19.64 5.01
90 x 50
5.0 6.81 8.68 0.00 1.55 3.19 0.00 105.51 21.10 3.49 1.56 23.45 6.12
90 x 55 4.0 5.87 7.47 0.00 1.70 3.65 0.00 95.76 22.83 3.58 1.75 21.28 6.01
90 x 75 4.0 7.12 9.07 0.00 2.55 5.47 0.00 125.37 53.66 3.72 2.43 27.86 10.84
100 x 35 4.0 4.93 6.27 0.00 0.90 1.85 0.00 85.51 6.60 3.69 1.03 17.10 2.53
2.5 3.37 4.29 0.00 1.00 2.27 0.00 63.43 6.42 3.84 1.22 12.69 2.14
3.0 4.01 5.10 0.00 1.02 2.27 0.00 74.41 7.55 3.82 1.22 14.88 2.54
100 x 40
4.0 5.24 6.67 0.00 1.07 2.25 0.00 94.73 9.67 3.77 1.20 18.95 3.30
5.0 6.42 8.18 0.00 1.11 2.24 0.00 112.97 11.6 3.72 1.19 22.59 4.02
TECHNICAL SPECIFICATION
Material : JIS G3101 / ASTM A 36 Non standard length is available request subject to minimum quantity. We provide additional
Symbol : SSC 400 / ASTM A 36 services for standard drilling and punching (for detail, please refer to “standard drilling /
Chemical Component : C. 0.25% (Maximum) punching for lip channel” data sheet). Shot blasting, painting and galvanizing are available on
P. 0.05% (Maximum) request
S. 0.05% (Maximum)
Technical data : Yield point : 25 kg/mm2 (Minimum)
Tensile Strength : 41-55 kg/mm2
Standard length : 6.00 m
Now, We can produce for additional specification material with metric size :
METRIC SIZE
INFORMATIVE REFERENCE
STANDARD
SECTIONAL CENTER GEOMETRICAL MODULUS
SECTIONAL UNIT RADIUS OF GYRATION
AREA OF MOMENT OF
DIMENSIONS WEIGHT OF AREA
GRAVITY OF INERTIA SECTION
HxB t A Cx=Cy Ix=Iy Max Iu Min Iv ix=iy Max iu Min iv Zx=Zy
2.0 1.52 1.19 1.10 2.44 0.00 4.88 1.27 0.00 1.79 0.84
40 x 40 2.5 1.88 1.47 1.12 2.98 0.00 5.96 1.26 0.00 1.78 1.04
3.0 2.25 1.77 1.14 3.52 5.71 1.33 1.25 1.59 0.77 1.23
2.0 1.92 1.51 1.35 4.85 0.00 9.70 1.59 0.00 2.25 1.33
50 x 50 2.5 2.38 1.87 1.74 5.95 0.00 11.90 1.58 0.00 2.24 1.64
3.0 2.85 2.24 1.39 7.05 11.41 2.69 1.57 2.00 0.97 1.95
2.0 2.32 1.82 1.60 8.48 0.00 16.96 1.91 0.00 2.70 1.93
60 x 60 2.5 2.88 2.26 1.62 10.44 0.00 20.88 1.90 0.00 2.69 2.39
3.0 3.45 2.71 1.64 12.39 20.02 4.76 1.89 2.41 1.17 2.84
70 x 70 3.0 4.05 3.18 1.89 19.92 32.15 7.70 2.22 2.82 1.38 3.90
Non standard length is available request subject to minimum quantity. We provide additional services
for standard drilling and punching (for detail, please refer to “standard drilling / punching for lip
channel” data sheet) Shot blasting, painting and galvanizing are available on request
TECHNICAL DATA
STANDARD TOLERANCE
Yield Strength Tensile Strength LENGTH (mm)
MATERIAL GRADE
(Fy) (Ft)
Min Min m t H, B
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail (62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
PROPERTIES
Standard AS 1397
Width tolerance + 6 mm
Transport height of 24 sheets 275 mm
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
WIDTH WEIGHT
THICKNESS LENGTH
PART NO. TYPE MATERIAL SHEET
mm mm mm Kg
EVG-01 Eave Gutter 553 0.7 3000 9.42
VLG-01 Valley Gutter 1130 0.7 3000 19.23
VLG-02 Valley Gutter 1157 0.7 3000 19.86
EGD-01 Eave Gutter Down Spout 386 0.7 3000 6.57
VGD-01 Valley Gutter Down Spout 816 0.7 3000 13.89
EGD-02 Eave Gutter Down Spout 350 0.7 3000 5.94
VGD-02 Valley Gutter Down Spout 884 0.7 3000 15.03
Valley Gutter Down Spout Outlet
VGDO-01 804 0.7 100 0.46
OTL-01 Eave Gutter Down Spout Outlet 380 0.7 100 0.22
ECS-01 End Closure Type -1 - 0.45 - 0.49
ECS-02 End Closure Type-2 - 0.45 - 0.49
DWS-01 Down Spout Strap 314 0.45 50 0.06
OGS-01 Oasisi Gutter Strap 162 0.45 300 0.18
Down Spout Elbow 135o
DEL-01 396 0.7 260 0.59
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
Weight Section Area Moment of inertia Section Modulus
Type Size
kg/m cm2 Lx cm4 Ly cm4 Zx cm3 Zy cm3
I-75X75X5X8
I-100X75X5X8
I- 11.9 15.18 15.18 48.3 38.9 12.9
125X75X5.5X9.5 12.9 16.43 16.43 48.3 56.5 12.9
I- 16.1 20.45 20.45 59.0 86.4 15.7
150X75X5.5X9.5 17.1 21.83 21.83 59.1 109 15.8
JIS H-100X100X6X8 17.2 21.90 21.90 134 76.5 26.7
G3192 H-125X60X6X8 13.2 16.84 16.84 29.2 66.1 9.73
H- 31.5 40.14 40.14 563 219 75.1
150X150X7X10 9.36 11.92 11.92 26.9 37.8 7.82
I-100X50X5X7.5 13.4 17.11 17.11 65.5 68.0 14.4
I-125X65X6X8 18.6 23.71 23.71 122 115 23.6
I-
150X75X6.5X10
I-
150X50X3.2X3.2
6.02 7.663 7.663 16.9 32.5 4.37
JIS I-
8.31 10.58 10.58 22.8 43.9 5.99
G3350 150X50X4.5X4.5
10.1 12.83 12.83 71.4 59.8 13.2
I-
150X75X4.5X4.5
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
Sectional Centre of Centre of Moment of Radius of Modulus of
Dimension Thickness Unit Area Gravity Shear Inertia Gyration Section
t Weight
HxBxC A Cx Cy Sx Sy lx ly ix iy Zx Zy
mm x mm mm kg/m cm2 cm cm cm cm cm4 cm4 cm cm cm3 cm3
2.00 3.56 4.54 0 - - 0 - - - - - -
2.30 4.06 5.17 0 1.86 4.4 0 81 19 3.95 1.92 16.1 6.06
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail (62-21) (62-21) (62-21) (62-21)
Local :
Anton Liong 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
Width
4'x8' 4'x20' 5'x10 5'x20' 5'x30' 5'x40' 6'x20' 6'x40' 7'x20' 7'x40' 8'x20' 8'x40' 9'x20' 9'x40' 10'x20' 10'x40'
x
Length
132x240 132x480
(in ft) 48x96 48x240 60x120 60x240 60x360 60x480 72x240 72x480 84x240 84x480 96x240 96x480 108x240 108x480 120x240 120x480
(in
inch)
Thickness (mm)
8 187 467 292 583 875 1,167 700 1,400 817 1,634 933 1,867 1,051 2,100 1,167 2,334 1,284 2,567
9 210 525 328 656 985 1,313 788 1575 919 1837 1050 2100 1,182 2363 1,313 2,625 1,444 2,888
10 233 583 365 729 1,094 1,459 875 1,750 1,021 2,042 1,167 2,333 1,313 2,625 1,459 2,917 1,605 3,209
12 280 700 438 875 1,313 1,750 1050 2,101 1,225 2,450 1,400 2,800 1,575 3,151 1,750 3,501 1,925 3,851
12.7 296 741 463 926 1,389 1,852 1112 2,223 1,296 2,593 1,482 2,963 1,667 3,334 1,852 3,705 2,083 4,076
14 327 817 510 1,021 1,532 2,042 1225 2,451 1,429 2,858 1,634 3,267 1,838 3,675 2,042 4,084 2,246 4,493
15 350 875 547 1,094 1,641 2,188 1313 2,626 1,532 3,062 1,750 3,500 1,969 3,938 2,188 4,376 2,407 4,814
16 373 933 584 1,167 1,750 2,334 1400 2,801 1,634 3,266 1,867 3,734 2,100 4,201 2,334 4,667 2,567 5,134
18 420 1,050 656 1,313 1,969 2,625 1575 3,151 1,837 3,675 2,100 4,200 2,363 4,725 2,625 5,251 2,888 5,776
19 443 1,108 693 1,386 2,078 2,771 1663 3,326 1,939 3,879 2,217 4,433 2,494 4,988 2,771 5,543 3,049 6,097
20 467 1,167 729 1,459 2,188 2,917 1751 3,501 2,041 4,083 2,333 4,667 2,625 5,250 2,917 5,834 3,209 6,418
22 513 1,283 802 1,604 2,407 3,209 1926 3,851 2,246 4,491 2,567 5,133 2,888 5,776 3,209 6,418 3,530 7,060
24 560 1,400 875 1,750 2,625 3,501 2101 4,201 2,450 4,900 2,800 5,600 3,150 6,301 3,501 7,001 3,851 7,702
25 583 1,458 912 1,823 2,735 3,646 2118 4,376 2,552 5,104 2,917 5,833 3,282 6,563 3,646 7,293 4,011 8,023
25.4 593 1,482 926 1,852 2,779 3,705 2223 4,446 2,593 5,185 2,963 5,927 3,334 6,668 3,705 7,410 4,076 8,151
26 607 1,517 948 1,896 2,844 3,792 2276 4,551 2,654 5,308 3,033 6,067 3,413 6,826 3,792 7,585 4,172 8,344
28 653 1,633 1,021 2,042 3,063 4084 2451 4,901 2,858 5,716 3,267 6,534 3,676 7,351 4,084 8,168 4,493 8,985
30 700 1,750 1,094 2,188 3,282 4,376 2,626 5,251 3,062 6,124 3,500 7,000 3,938 7,876 4,376 8,751 4,814 9,627
32 747 1,867 1,167 2,334 3,501 4,668 2,801 5,602 3,266 6,533 3,733 7,467 4,200 8,401 4,667 9,335 5,134 10,269
36 840 2,100 1,313 2,625 3,938 5,251 3,151 6,302 3,675 7,349 4,200 8,400 4,725 9,451 5,251 10,502 5,776 11,553
38 887 2,217 1,386 2,771 4,157 5,543 3,326 6,652 3,879 7,757 4,433 8,867 4,988 9,976 5,543 11,085 6,097 12,194
40 933 2,333 1,459 2,917 4,376 5,834 3,501 7,001 4,083 8,166 4,667 9,334 5,250 10,501 5,834 11,669 6,418 12,836
45 1,050 2,625 1,641 3,282 4,923 6,564 3,938 7,877 4,593 9,186 5,250 10,500 5,907 11,814 6,564 13,127 7,220 14,441
50 1,167 2,917 1,823 3,646 5,470 7,293 4,376 8,752 5,104 10,207 5,833 11,667 6,563 13,126 7,293 14,586 8,023 16,045
55 1,283 3,209 2,006 4,011 6,017 8,022 4,814 9,628 5,614 11,228 6,417 12,833 7,219 14,439 8,022 16,044 8,825 17,650
60 1,400 3,500 2,188 4,376 6,564 8,752 5,251 10,503 6,124 12,249 7,000 14,000 7,876 15,751 8,751 17,503 9,627 19,254
65 1,516 3,792 2,370 4,740 7,111 9,481 5,689 11,378 6,635 13,269 7,583 15,167 8,532 17,064 9,481 18,962 10,429 20,859
70 1,633 4,083 2,553 5,105 7,658 10,210 6,127 12,253 7,145 14,290 8,167 16,333 9,188 18,377 10,210 20,420 11,232 22,463
75 1,750 4,375 2,735 5,470 8,204 10,939 6,565 13,129 7,655 15,311 8,750 17,500 9,845 19,689 10,939 21,879 12,034 24,068
80 1,866 4,667 2,917 5,834 8,751 11,669 7,002 14,004 8,166 16,331 9,333 18,667 10,501 21,002 11,669 23,337 12,836 25,672
85 1,983 4,958 3,099 6,199 9,298 12,398 7,440 14,879 8,676 17,352 9,917 19,833 11,157 22,315 12,398 24,796 13,639 27,277
90 2,100 5,250 3,282 6,564 9,845 13,127 7,877 15,754 9,186 18,373 10,500 21,000 11,814 23,627 13,127 26,254 14,441 28,882
95 2,217 5,542 3,464 6,928 10,392 13,856 8,315 16,630 9,697 19,394 11,083 22,167 12,470 24,940 13,856 27,713 15,243 30,486
100 2,333 5,833 3,646 7,293 10,939 14,586 8,753 17,505 10,207 20,414 11,667 23,333 13,126 26,252 14,586 29,172 16,045 32,091
75 1,750 4,375 2,735 5,470 8,204 10,939 6,565 13,129 7,655 15,311 8,750 17,500 9,845 19,689 10,939 21,879 12,034 24,068
80 1,866 4,667 2,917 5,834 8,751 11,669 7,002 14,004 8,166 16,331 9,333 18,667 10,501 21,002 11,669 23,337 12,836 25,672
85 1,983 4,958 3,099 6,199 9,298 12,398 7,440 14,879 8,676 17,352 9,917 19,833 11,157 22,315 12,398 24,796 13,639 27,277
90 2,100 5,250 3,282 6,564 9,845 13,127 7,877 15,754 9,186 18,373 10,500 21,000 11,814 23,627 13,127 26,254 14,441 28,882
95 2,217 5,542 3,464 6,928 10,392 13,856 8,315 16,630 9,697 19,394 11,083 22,167 12,470 24,940 13,856 27,713 15,243 30,486
100 2,333 5,833 3,646 7,293 10,939 14,586 8,753 17,505 10,207 20,414 11,667 23,333 13,126 26,252 14,586 29,172 16,045 32,091
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Sujono 0818- 148519 sujono@grdsteel.com 89838-190 89838-198 8901570 Ext 6200 8900-555
Lisa 0819- 702831 lisa@grdsteel.com 89838-161 89838-198 8901570 Ext 6119 8900-555
Pardiman 0818- 871636 pardiman@grdsteel.com 89838-162 89838-198 8901570 Ext 6118 8900-555
Tody 0817- 719909 tody@grdsteel.com 89838-191 89838-198 8901570 Ext 6201 8900-555
Budi 0818- 241581 budi@grdsteel.com 89838-195 89838-198 8901570 Ext 6221 8900-555
Export :
Suwanto 0818- 488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
400-
A 36 < 20 0.25 1.40 0.40 0.040 0.040 250 550
20 -
ASTM/ASME 6 - 80 > 20 - 40 0.25 0.8/1.20 0.40 0.040 0.040
SA 36 > 40 - 65 0.26 0.8/1.20 0.40 0.040 0.040 (36) (58-
80) 21 -
275
265 430-
< 16
255 580
> 16 - 40 1.6 max 0.5 max 0.040 20
43-A 0.25 -
> 40 0.040
< 16 275 27/+200C
BS 4360 43-B 6 - 80 > 16 - 40 0.040 265
1.5 max 0.5 max 430- 20
> 40 0.21 0.040 255
< 16 580
43-C Hot Roll 0.5 max 27/00C
> 16 - 40
Steel used 0.18 1.5 max 0.040 275
> 40 20
for general 0.040 265
structure 255 430-
and 580
engineering
purposes
410
AS 3678 250 such as 0.22 1.7 max 0.5 max 0.040 0.035 250 20 -
Structural min
building,
Steel
bridges
bolted for < 16 0.17 1.4 max - 0.045 0.045 235 26
service at > 16 - 40 0.17 1.4 max - 0.045 0.045 225 340- 26
S235 ambient or > 40 0.20 1.4 max -- 0.045 0.045 215 470 25
JRG2 lower
temperature
< 16 0.21 1.5 max - 0.045 0.045 275 22 27 / RT
S275 good weld
EN 10025 ability 6 - 80 > 16 - 40 0.21 1.5 max - 0.045 0.045 265 410- 22
JR
> 40 0.22 1.5 max - 0.045 0.045 255 560 21 27 / 00 C
S275
< 16 0.18 1.5 max - 0.040 0.040 275 410- 22
JO
> 16 - 40 0.18 1.5 max - 0.040 0.040 265 560 22
> 40 0.18 1.5 max 0.15/0.40 0.040 0.040 25 21
26
(80
mm)
< 16 0.17 - - 0.050 0.050 235 25
ST > 16 - 40 0.20 - - 0.050 0.050 225 340- (80
37.2 > 40 0.20 - - 0.050 0.050 225 470 mm)
EN 10025 6 - 80 24
(80
ST < 16 0.21 - - 0.050 0.050 275 410-
mm)
44.2 > 16 - 40 0.21 - - 0.050 0.050 265 540
> 40 0.21 - - 0.050 0.050 255
22
21
20
For further information about this product, please contact : better call by DID
Local Sales :
0818-
Sujono sujono@grdsteel.com 89838-190 89838-198 8901570 Ext 6200 8900-555
148519
0819-
Lisa lisa@grdsteel.com 89838-161 89838-198 8901570 Ext 6119 8900-555
702831
0818- pardiman@grdsteel.com
Pardiman 89838-162 89838-198 8901570 Ext 6118 8900-555
871636
0817-
Tody tody@grdsteel.com 89838-191 89838-198 8901570 Ext 6201 8900-555
719909
0812- susi@grdsteel.com
Susi 89838-194 89838-198 8901570 Ext 6220 8900-555
8495906
0818- budi@grdsteel.com
Budi 89838-195 89838-198 8901570 Ext 6221 8900-555
241581
Export Sales :
0818-
Suwanto skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
488956
METRIC SIZE
Resistant
Moment Inertia Gyration Radius
Dimension t Moment
Area (cm4) (cm)
R Weight (cm3)
Section
H B
Ix Iy Zx Zy ix iy
mm mm mm mm kg/m cm2
180 100 6.3 18 25.64 32.33 1.334.99 535.75 148.33 107.15 6.43 4.07
180 100 8.0 18 31.86 40.04 1.598.49 637.47 177.61 127.49 6.32 3.99
180 100 10.0 18 38.80 48.57 1.859.47 736.41 206.61 147.28 6.19 3.89
180 120 6.3 18 27.62 34.85 1.525.15 816.14 169.46 136.20 6.62 4.84
180 120 8.0 18 34.38 43.24 1.835.33 978.44 203.93 163.07 6.51 4.76
180 120 10.0 18 41.94 52.57 2.148.80 1.140.81 238.76 190.13 6.39 4.66
200 100 6.3 18 27.62 34.85 1.739.24 591.15 173.92 118.23 7.06 4.12
200 100 8.0 18 34.38 43.24 2.090.84 705.36 209.08 141.07 6.95 4.04
200 100 9.0 18 38.22 48.67 2.350.00 782.00 235.00 156.00 6.94 4.01
200 100 10.0 18 41.94 52.57 2.444.40 817.74 244.44 163.55 6.82 3.94
250 150 6.3 18 37.52 47.45 4.001.43 1.824.59 320.11 243.28 9.18 6.20
250 150 8.0 18 46.94 59.24 4.885.79 2.219.25 390.86 295.90 9.08 6.12
250 150 10.0 18 57.64 75.27 5.825.01 2.634.20 466.00 351.23 8.96 6.02
250 150 12.0 18 67.92 86.53 6.850.00 3.070.00 548.00 409.00 8.90 5.95
300 200 6.3 18 47.40 60.05 7.624.39 4.103.82 508.29 410.38 11.27 8.27
300 200 8.0 18 59.50 75.24 9.389.27 5.041.67 625.95 504.17 11.17 8.19
300 200 10.0 18 73.34 92.57 11.312.70 6.057.73 754.18 605.77 11.05 8.09
300 200 12.0 18 86.76 110.50 13.400.00 7.110.00 890.00 711.00 11.00 8.02
400 200 6.3 18 57.30 72.56 15.329.74 5.286.10 766.49 528.61 14.53 8.53
400 200 8.0 18 72.06 91.24 18.974.42 6.517.08 948.72 651.71 14.42 8.45
400 200 10.0 18 89.04 112.57 23.002.65 7.864.40 1.150.13 786.44 14.30 8.36
400 200 12.0 18 105.60 134.50 27.300.00 9.230.00 1.360.00 923.00 14.20 8.23
400 300 9.0 18 94.74 119.30 27.600.00 17.800.00 1.380.00 1.190.00 15.20 12.20
400 300 12.0 18 124.44 156.10 35.300.00 22.700.00 1.760.00 1.520.00 15.00 12.10
400 300 16.0 45 162.22 202.80 44.300.00 28.500.00 2.220.00 1.900.00 14.80 11.90
500 300 12.0 18 143.28 180.10 60.600.00 27.700.00 2.420.00 1.850.00 18.30 12.40
500 300 16.0 45 187.74 234.80 76.800.00 35.000.00 3.070.00 2.330.00 18.10 12.20
500 300 19.0 45 220.02 271.80 86.100.00 39.300.00 3.440.00 2.620.00 17.80 12.00
500 400 12.0 18 162.12 204.10 74.900.00 53.400.00 3.000.00 2.670.00 19.20 16.20
500 400 16.0 45 212.86 266.80 95.500.00 68.000.00 3.820.00 3.400.00 18.90 16.00
500 400 19.0 45 249.84 309.80 108.000.00 76.900.00 4.320.00 3.850.00 18.70 15.80
Customer Service :
Notes :
- Standard length 6 m and 12 m
- Thickness max. 25 mm
- Other specification/standard size on request can also be supplied
- Max dimension is 1000 mm x 1000 mm
Standard :
- Specification standard JIS & ASTM
- Material standars SS 400, A36 & GR 50 A,B,C
- Bigger dimension will be produced, if there confirm before.
For further information about this product, please contact : better call by DID
Local Sales :
Anton Liong 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export Sales :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
For further information about this product, please contact : better call by DID
Local Sales :
Anton Liong 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Junaedi 0818-871477 junaedi@grdsteel.com 8983-8291 8983-8198 8910-8151 Ext.6242 890-0555
Aan 0811-956592 aan@grdsteel.com 8983-8292 8910-7711 8910-8151 Ext 6247 890-0555
Export Sales :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
STANDARD
STANDARD INFORMATIVE
INFORMATIVE REFERENCE
REFERENCEE
SECTIONAL
SECTIONAL UNIT CENTER
CENTER
SECTIONAL
SECTIONAL GEOMETRICALMOMENT
GEOMETRICAL MOMENT RADIUS OF GYRATION
GYRATION MODULUS
AREA
AREA WEIGHT OF
WEIGHT
UNIT OF GRAVITY
GRAVITY RADIUS OF MODULUS
DIMENSIONS
DIMENSIONS OFINERTIA
OF INERTIA OF AREA
AREA OF
OF OF SECTION
SECTION
HxB t A Cx1 Cy1 Ix Iy Min Iu Min Iv ix iy Min iu Min iv Zx Zy
mm mm cm2 kg/m cm cm cm4 cm4 cm4 cm4 cm cm cm cm cm3 cm3
30 x 20 3.0 4.00 2.43 1.42 27.29 13.53 33.99 6.83 2.60 1.83 2.90 1.30 4.90 2.95
40 x 30 2.0 4.00 2.46 1.44 31.47 15.57 39.22 7.82 2.59 1.82 2.89 1.29 5.68 3.42
50 x 40 2.0 4.00 2.48 1.46 35.54 17.56 44.32 8.78 2.58 1.81 2.88 1.28 6.44 3.87
60 x 50 2.0 4.00 2.53 1.51 43.38 21.37 54.16 10.59 2.57 1.80 2.87 1.27 7.93 4.76
70 x 60 2.0 4.00 2.43 1.42 27.29 13.53 33.99 6.83 2.60 1.83 2.90 1.30 4.90 2.95
80 x 60 3.0 4.05 3.18 2.43 1.42 27.29 13.53 33.99 6.83 2.60 1.83 2.90 1.30 4.90 2.95
80 x 60 3.5 4.70 3.69 2.46 1.44 31.47 15.57 39.22 7.82 2.59 1.82 2.89 1.29 5.68 3.42
80 x 60 4.0 5.34 4.19 2.48 1.46 35.54 17.56 44.32 8.78 2.58 1.81 2.88 1.28 6.44 3.87
80 x 60 5.0 6.59 5.17 2.53 1.51 43.38 21.37 54.16 10.59 2.57 1.80 2.87 1.27 7.93 4.76
100 x 60 3.0 4.56 3.65 3.28 1.25 50.04 14.37 56.20 8.21 3.28 1.76 3.51 1.33 7.44 3.03
100 x 60 3.5 5.40 4.24 3.30 1.28 57.79 16.56 64.93 9.42 3.27 1.75 3.47 1.32 8.63 3.50
100 x 60 4.0 6.14 4.82 3.33 1.30 65.37 18.68 73.46 10.59 3.26 1.74 3.46 1.31 9.80 3.97
100 x 60 5.0 7.59 5.96 3.38 1.34 80.05 22.76 89.99 12.82 3.25 1.73 3.44 1.30 12.10 4.89
100 x 60 6.0 9.01 7.07 3.44 1.38 94.09 26.63 105.82 14.90 3.23 1.72 3.43 1.29 14.33 5.77
100 x 80 3.0 5.25 4.12 2.92 1.91 55.25 32.12 71.79 15.58 3.24 4.27 3.70 1.72 7.80 5.27
100 x 80 3.5 6.10 4.79 2.95 1.93 63.87 37.10 83.05 17.92 3.24 2.47 3.69 1.71 9.05 6.11
100 x 80 4.0 6.94 5.45 2.97 1.95 72.32 41.97 94.10 20.19 3.23 2.46 3.68 1.71 10.29 6.94
100 x 80 5.0 8.59 6.74 3.02 2.00 88.75 51.40 115.61 24.54 3.21 2.45 3.67 1.69 12.71 8.57
100 x 80 6.0 10.21 8.01 3.07 2.04 104.53 60.43 136.32 28.64 3.20 2.43 3.65 1.67 15.08 10.15
150 x 60 3.0 6.15 4.83 5.53 0.98 149.61 15.77 155.08 10.30 4.93 1.60 5.02 1.29 15.79 3.14
150 x 60 3.5 7.15 5.61 5.56 1.01 173.18 18.17 179.50 11.85 4.92 1.59 5.01 1.29 18.34 3.64
150 x 60 4.0 8.14 6.39 5.58 1.03 196.36 20.52 203.53 13.35 4.91 1.59 5.00 1.28 20.86 4.13
150 x 60 5.0 10.09 7.92 5.64 1.07 241.58 25.05 250.39 16.24 4.89 1.58 4.98 1.27 25.81 5.08
150 x 60 6.0 12.01 9.43 5.70 1.11 285.26 29.36 295.64 18.98 4.87 1.56 4.96 1.26 30.67 6.01
150 x 80 3.0 6.75 5.30 5.05 1.52 165.42 35.75 179.67 21.50 4.95 2.30 5.16 1.78 16.62 5.52
150 x 80 3.5 7.85 6.16 5.08 1.54 191.65 41.31 208.17 24.79 4.94 2.29 5.15 1.78 19.31 6.40
150 x 80 4.0 8.94 7.02 5.10 1.56 217.49 46.77 236.26 28.00 4.93 2.29 5.14 1.77 21.97 7.27
150 x 80 5.0 11.09 8.70 5.16 1.60 268.05 57.38 291.24 34.19 4.92 2.27 5.12 1.76 27.23 8.97
150 x 80 6.0 13.21 10.37 5.21 1.65 317.11 67.57 344.60 40.08 4.90 2.26 5.11 1.74 32.39 10.64
120 x 80 4.0 10.94 8.59 7.37 1.31 472.85 49.83 490.14 32.54 6.58 2.13 6.69 1.72 37.44 7.45
120 x 80 5.0 13.59 10.67 7.43 1.36 584.12 61.17 605.45 39.84 6.56 2.12 6.67 1.71 46.46 9.21
120 x 80 6.0 16.21 12.72 7.48 1.40 692.66 72.11 717.94 46.83 6.54 2.11 6.66 1.70 55.34 10.92
TECHNICAL SPECIFICATION
TOLERANCE (mm)
Material : JIS G3350
t H, B Symbol : SSC 41
+ 0.5 +2 Chemical Component : C. 0.25% (Maximum)
P. 0.05% (Maximum)
S. 0.05% (Maximum)
: Yield point : 25 kg/mm2
Technical data
For further information, (minimum)
please contact Gunung : Tensile Strength : 41-55 kg/mm2
Raja Paksi, PT Standard length : 6.00 m
METRIC SIZE
MODULUS
DIMENSION THICKNESS UNIT SECTIONAL
SECTIONAL CENTER
CENTER OFOF MOMENT
MOMENT OF OF RADIUS
RADIUS OF OF OF
DIMENSION THICKNESS UNIT OF
WEIGHT AREA
AREA GRAVITY
GRAVITY INERTIA
INERTIA GYRATION
GYRATION SECTION
WEIGHT SECTION
HxBxC t A Cx Cy Ix Iy ix iy Zx Zy
mm mm kg/m cm2 cm cm cm4 cm4 cm cm cm3 cm3
2 4.25 5.41 0 0 180 36 5.77 2.58 23.99 6
TECHNICAL SPECIFICATION
Material : JIS G3131 / G3101 Non standard length is available request
Symbol : SPHC / SS 400 subject to minimum quantity. We provide
Chemical Component : C. 0.15% (Maximum) additional services for standard drilling and
P. 0.05% (Maximum) punching (for detail, please refer to “standard
S. 0.05% (Maximum) drilling / punching for lip channel” data sheet).
Shot blasting, painting and galvanizing are
Standard length : 6.00 m available on request
PROFILE SIZE
INTEGRATED FLOOR BEAM
Code
IFB-H x d - t1 x B1 / t2 x B2 - L
Fabrication size
H = 200 - 300 mm
B = 100 - 800 mm
d = 6 - 35 mm
t1/t2 = 8 - 100 mm
U BEAM
Code
UB - H1 x d1 / H2 x d2 - t x B2 - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
L SECTION
Code
LB - H x d - t x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
HSK SECTION (BOX BEAM)
Code
HSK - H x d - t x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
MSI BEAM
Code
MSI - H x d - t1 x B1 / t2 x B2 - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
PROFILE SIZE
I CAMBERED BEAM
Code
ICB - H x d - t1/t2 x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
I TAPERED BEAM
Code
ITB - H1 / H2 x d - t1 / t2 x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
Note :
a. General specification for rolled steel material refer to JIS G 3101
b. Welded specification refer to JIS G 3106
c. Standard welded process refer to A5.18 (Gas Metal Arc. Welding), A5.1 (Shielded metal Arc. Welding), A5.17 (Submerged
Arc. Welding)
- Local :
Sumarno 0818-125496 sumarno@grdsteel.com 8983-8295 8983-8198 890-1570 Ext. 6246 890-0555
Lisa 0819-702831 sales@grdsteel.com 8983-8161 8983-8298 890-0666 Ext. 6119 890-0555
- Export :
Suwanto 0818-488956 dte@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555