Professional Documents
Culture Documents
16C97 Door Lock Instruction Manual
16C97 Door Lock Instruction Manual
1 2
1). Change the management passwords. 6). Unlock Mode and Mode Setting
“*7” + management passwords + # + new management passwords + #. Setting finished. Remarks: Default Mode is Mode (1).
Remarks: New management passwords will replace the old one.
Mode(1): Password mode or Card mode. Unlock the lock by any valid password or card.
Atten.: The correct operation of “*7”:Use one finger press *, then another finger press 7, Setting: “*0” + management key + # + 1 + 0 + #.
then release both buttons at the same time. Same operation for “*8”, “*9”, “*0”, “*1”.
Mode(2): Coordination unlocking of approval by valid user card and valid user password.
2). Change the management card. It is OK to read the valid card first or input the valid password first.
“*7” + management passwords + # + new management card + #. Setting finished. Setting: “*0” + management key + # + 1 + 3 + #.
Remarks: New management card will replace the old one.
7). Passage Mode
We named “Read management card” or “Input management passwords” to “management Passage Mode Setting: “*0” + management key + # + 2 + 1 + #.
key” in the following instructions. Passage Mode Open: “*0” + management key + # + 2 + 1 + # + user card or user passwords
+ “*1” (one sound). Setting finished.
3). Add new user cards or new user passwords. Based on above open mode, continue to touch user card or input user passwords or press
Add new user cards: “*8” + management key + # + new card + #. “#” to close passage mode.
Repeat for more user cards.
8). Others
Add new user passwords: “*8” + management key + # + new passwords + #. a. Alarm whistle 10 times after inputting error password 3 times, alarm whistle 10 times and
Repeat for more user passwords. keyboard will be locked for 1 minute after error password 7 times.
b. Protect your passwords by using one group of numbers which includes the user
The function can input many user cards continuously, or input many user passwords; passwords: When you use passwords to open door, input passwords as per method: xxx +
The function will exit automatically after 6 seconds, or you can press “#” to exit operation user passwords + xxx + “*#”. It means that after press button“*#” to confirm, you can add
directly. several unrelated passwords in front or after user passwords.
Remark: User passwords must be entered and must be within the last 31 numbers.
4). Delete user cards or user passwords. c. Factory setup: Dismantle batteries cover of back panel, press ADEL button for 3 seconds,
Delete user cards: “*9” + management key + # + user card + #. then red lamp lighting, and make a long sound, the system start to recover factory setup,
Repeat to delete more user cards. memory, all cards and passwords records are completely deleted, finally admin password
is“0000”, passage mode, working mode is mode 1.
Delete user passwords: “*9” + management key + # + user passwords + #. d. Press“*” singly means “cancel”, press “#” singly means “confirm”, press “*#” means
Repeat to delete more user passwords. “confirm”.
The function can delete many user cards continuously, or delete many user passwords;
The function will exit automatically after 6 seconds, or you can press “#” to exit
operation directly.
5 6
Five Hole Map
Hole depth
of the strike
Hole depth
plate case
of the strike
32mm
plate case
32mm
Central line
Edge line of the door
Edge line of the door
7 8
Six Notes:
1. Factory code”123456” is set to facilitate opening door when installation, it will be invalid
after delete all information of lock.
2. Can change the outward or inward opening for cylinder, see pic.
9 10