Professional Documents
Culture Documents
Atmos Pipe
Atmos Pipe
Atmos Pipe
One of the most proven pipeline leak detection
systems in the world, based on statistical volume
balance
Life and property: Spills can cause explosions • Locate leaks accurately
that kill or harm people and property. • Issue minimal false alarms
Financial: The loss of pipeline product costs • Be easy to retro-fit
millions of dollars. Extremely high fines are
• Work effectively under all operating
imposed on the company even if the spill is not the conditions
fault of the company.
• Use sensors with high reliability and low
Environmental: Spills, particularly into water maintenance
systems, damage the environment and kill great
numbers of wildlife.
Reputational: A product spill will cause severe Main features
damage to reputation. Reputation management • Field proven for 20 years on more than 600
is critical as the public become more sensitive to pipelines
environmental issues; if mismanaged it can cost • Minimum false alarms
millions of dollars.
• Detects onset and existing leaks
• Leak location accuracy: as low as ± 1000m
• Leak detection size: less than 0.25% of the
flow with high quality instrumentation
• Applied to pipelines between 3 KM and 1910
KM in length and 0.5” and 48” in diameter
• Software based solution, using flow and
pressure data from a SCADA or PLC system
• Detects leaks under all operating conditions
with negligible reduction in minimum
detectable leak size during transients
• Fully compliant with: -
Shell Pipeline Leak Detection
Recommendations (DEP 31.40.60.11-
Gen)
API 1130, API 1155, API 1149
German Regulations for Pipeline Leak
Detection (TRFL).
www.atmosi.com
What is Atmos Pipe?
Since its inception as the first statistical volume
balance system in 1995, Atmos Pipe has been
at the forefront of leak detection technology. It is
operational in many leading oil and gas companies
worldwide.
Atmos Pipe is a statistical volume balance leak
detection system. It uses the powerful Sequential
Probability Ratio Test (SPRT) and pressure and
flow analysis to optimize the leak detection.
At Atmos, we understand every pipeline has its
own personality. The design of Atmos Pipe allows
our engineers to configure and tune each system
to minimize the effect of:
• Instrument faults including
telecommunication failures
• Operational changes from shut-in to start-up Atmos Pipe is proven to detect leaks through transient conditions
and running
System outputs
• Fluid property changes
• Leak alarm
• Seasonal changes or supply and demand
variations • Leak location
Sensors used
Atmos International
Email: info@atmosi.com
• Pressure meters at each end and optionally at intermediate pump
and valve stations along the line
UK
165D Burton Road
Manchester M20 2LN
• Flow meters at supply and delivery points
Tel: +44 161 445 8080
Fax: +44 161 434 6979 • Temperature meters are not crucial but are advised in pipelines
USA where there are large differences between product and ambient
3100 E. Miraloma Ave temperature
Suite 240 D
Anaheim CA 92806
Tel: +1 714 520 5325
Fax: +1 714 520 5326
Russian Federation
Office 1012, 1013
Marshal Rybalko St. 2
Moscow 123060
Tel: +7 499 918 4140
www.atmosi.com