Professional Documents
Culture Documents
Gross: 165 KW 221 HP / 2100 Min Net: 163 KW 218 HP / 2100 Min 15495 KG (With Ripper 17425 KG) 3.71 M
Gross: 165 KW 221 HP / 2100 Min Net: 163 KW 218 HP / 2100 Min 15495 KG (With Ripper 17425 KG) 3.71 M
655
GD655-5 HORSEPOWER
Gross: 165 kW 221 HP / 2100 min-1
Net: 163 kW 218 HP / 2100 min-1
OPERATING WEIGHT
15495 kg (with ripper 17425 kg)
BLADE LENGTH
3.71 m
2
MOTOR GR ADER GD655-5
PRODUCTIVITY
Long Wheelbase & Short Turning Radius
Optimized Hydraulic & Cooling System
CONTROL
Outstanding Power Transmitting System
COMFORT
Excellent visibility
Specious Interior
SERVICEABILITY
Machine Monitoring System
Easy Maintenance Design
KOMTRAX
Energy Saving Operation Report Equipment Management Support
Optimal Strategy for Efficient Work
GD655-5
HORSEPOWER Gross: 165 kW 221 HP/2100min-1
Net: 163 kW 218 HP/2100min-1
OPERATING WEIGHT 15495 kg (with ripper 17425 kg)
BLADE LENGTH 3.71 m
3
DASH 5 SERIES MOTOR GRADERS
4
MOTOR GR ADER GD655-5
PRODUCTIVITY
The long wheelbase enables high leveling performance with a long blade and easier to set the blade position.
Long wheelbase also contributes to expanding blade reach in combination with large articulation angle.
Additionally the minimum turning radius still short with wide steering angle, serves high maneuverability.
High controllability
• Eliminates engine stalling and inching pedal operation
• Smooth starting, good controllability in fine grading
• Easy travelling, automatic gear shifting
• Reduce excessive tire slipping
Torque multiplication
• Multiply over twice torque, provides much torque in heavy
grading, ditching and ripping
• Stable engine speed, reduce shift changing during road
maintenance and snow removal
Lock-up function
• Prevents loss of efficiency
6
MOTOR GR ADER GD655-5
There is two transmission mode to enhance productivity. With the push of a button, transmission mode is selected to fit in work-
ing condition and preference of operators.
F1 F2 F3 F4 F5 F6 F7 F8 R1 R2 R3 R4
Manual Automatic
mode ● ● ● ● ● ● ● ● ○ ○ Shifting ●
●: Lock up clutch engaging
Anti Stall
F1 ○ ○
Prevents engine stalling
F2 while
○ Lock up by automatically disengaging the lock up clutch and shifting to torque converter state.
○
Torque converter provides
F3 ○ much torque○to continue to work as it is, never needs to restart the engine and shift the gear.
F4 ○ ○
Engine rotation is down and transmission shift mode is changed
F5
from direct to torque converter auto mode.
F6
Treveling Speed
F7
● RPM ●
F8 Engine
R1 ○ ○
R2 ○ Time○
line Resume quickly without
R3Working Slow Down Engine stalling
R4 ● ●
Creep Mode
Torque converter transmission introduces Creep Mode which provides constant low speed without acceleration and brake con-
trol. Optimized machine speed and great stability of torque converter boosts up precise control during fine grading.
Electronic Over-Speed Protection Prevents downshifting until reducing the travel speed to the safe range of shift changing.
FR Inhibitor restricts excessive shuttle shifting at high traveling speed.
7
COMFORT
Excellent Visibility
Excellent visibility by hexangular cab with front Y shape pillar and rear layout side pillar boost operator’s confidence and produc-
tivity in all grader applications. Well-positioned blade linkage provides an unobstructed view of the moldboard and front tires.
The tapered engine hood provides good visibility to the rear of the machine, especially the rear ripper.
ROPS Cab
8
MOTOR GR ADER GD655-5
Spacious Interior
Suspension seat
The suspension, fabric covered seat which is adjustable to
the operator’s weight is provided as standard.
The suspension seat dampens vibrations transmitted from the
machine and reduces operator fatigue.
The seat features fold-up armrests and a retractable seat belt.
Storage space
The cab includes built-in storage space for personal items
such as a lunch box, coffee cup, and a coat hook.
9
SERVICEABILITY
10
MOTOR GR ADER GD655-5
KOMTRAX
Location
Working status
Periodic maintenance
The detailed information that KOMTRAX puts at your fingertips helps you manage your fleet
conveniently on the web anytime, anywhere. It gives you the power to make better daily and
long-term strategic
decisions.
11
ECOLOGY & ECONOMY
• P mode
Greater productivity can be attained by taking full advantage
of high output power. It is appropriate for job sites where the
motor grader meets high resistance.
• E mode
This mode is selected for maximum economy and lighter
work applications. This feature provides the appropriate
power and better fuel consumption.
unit: kW(HP)
P mode E mode
AUTO MANU. AUTO MANU.
High performance engine
F1
Powerful turbocharged and air-to-air aftercooled Komatsu 134 (180)
F2 134 (180) 108 (145) 108 (145)
SAA6D107E-1 engine provides 163 kW 218 HP. This engine F3
realizes high power with low fuel consumption by Common F4
149 (200)
Rail Injection system (CRI), and thus it delivers higher work F5 149 (200) 134 (180) 134 (180)
speeds with high horsepower. In addition, high torque at low F6
speed, impressive acceleration, and low fuel consumption F7
163 (218) 163 (218) 149 (200) 149 (200)
ensure maximum productivity. F8
This engine is U.S. EPA Tier 3 and EU Stage 3A emissions R1
134 (180) 134 (180) 108 (145) 108 (145)
R2
certified.
R3
149 (200) 149 (200) 134 (180) 134 (180)
R4
12
MOTOR GR ADER GD655-5
Circumference dynamic
noise level (ISO6395) 111.4 dB (A)
13
WORK EQUIPMENTS
Moldboard options
Available both 3.7 m (12 ft) and 4.3 m (14 ft) moldboards.
Optional thicker blades are also available for heavy duty
application.
Front blade
The front blade is a front mounted equipment used for
spreading materials such as gravel piles or blading at the
front of the machine where is difficult to access with the
moldboard.
14
MOTOR GR ADER GD655-5
KOMATSU TOTAL SUPPORT
To keep your machine available and minimize operation cost Technical support
when you need it, Komatsu Distributor is ready to provide Komatsu product support service (Technical support) are de-
variety of support before and after procuring the machine. signed to help customer. Komatsu Distributor offers a variety
of effective services how much Komatsu is dedicated to the
Fleet recommendation maintenance and support of Komatsu machine.
Komatsu Distributor can study the customer’s job site and • Preventive Maintenance (PM) clinic
provide the most optimum fleet recommendation with de- • Oil & Wear analysis program
tailed information to meet all of your application needs when
you are considering to buy new machines or replace the Repair & maintenance service
existing ones from Komatsu. Komatsu Distributor offers quality repair and maintenance
service to the customer, utilizing and promoting Komatsu
developed programs.
Product support
Komatsu Distributor gives the proactive support and secures
the quality of the machinery that will be delivered.
Parts availability
Komatsu Distributor is available for emergency inquiry by the
customers for genuine, quality guaranteed Komatsu parts.
15
ENGINE ENGINE
TRANSMISSION AND
SPECIFICATIONS
TRANSMISSION TORQUE CONVERTER
ENGINE
AXLES TANDEM DRIVE
ENGINE
TRANSMISSION AND
TRANSMISSION AND
TORQUE CONVERTER
SUSPENSION
ENGINE SYSTEM FRONT AXLE
TORQUE CONVERTER
TRANSMISSION AND KOMATSU SAA6D107E-1
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type . . . . . . . . . . . . . . . Solid bar construction welded steel sections
TANDEM DRIVE
Type . . . . . . . . . . . . . . . . . . . . .
STEERING
TORQUE CONVERTER SYSTEM Water-cooled,4-cycle,direct injection
Ground clearance
REAR AXLE at pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 mm
TANDEM DRIVE
Aspiration . . . . . . . . . . . . . . Turbocharged and air to air aftercooled Wheel leanENGINE or left . . . . . . . . . . . . . . . . . . . . . . . . . . . 16°
angle, right
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Oscillation, total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32°
FRONT AXLE
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 mm
BRAKES
TANDEM DRIVE TRANSMISSION
WHEELS, FRONT AND AND REAR
FRONT AXLE
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 mm
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.69 L TORQUE CONVERTER
Gross horsepower (Manual mode) REAR AXLE
MAIN
FRONT FRAME
AXLE STEERING
REAR AXLE
P-mode
Gear 1-3 . . . . . . . . . . . . . . . . . . . . . . . 136 kW 183 HP/2000 min-1 TANDEM
Alloy steel, heat treated, DRIVE
full floating axle with lock/unlock
Gear 4-6 . . . . . . . . . . . . . . . . . . . . . . . 151 kW 203 HP/2000 min-1 ENGINE
differential.
WHEELS, FRONT AND REAR
Gear BODY
REAR AXLE
7-8 . . . . . . . . . . . . . . . . . . . . . . . 165 kW 221 HP/2100 min-1 BRAKES
WHEELS, FRONT AND REAR
TRANSMISSION AND
E-mode FRONT AXLE
Gear 1-3 . . . . . . . . . . . . . . . . . . . . . . . 110 kW 148 HP/2000 min-1 TORQUE
STEERING CONVERTER
Gear HYDRAULIC
WHEELS, FRONT SYSTEM AND
4-6 . . . . . . . . . . . . . . . . . . . . . . . 136 REAR
kW 183 HP/2000 min-1 FRAME
STEERING
Gear 7-8 . . . . . . . . . . . . . . . . . . . . . . . 151 kW 203 HP/2000 min-1 REAR AXLE
Net flywheel horsepower* (Manual mode) Hydraulic TANDEM
power steering
BRAKES DRIVE providing stopped engine steering
P-mode CAB
STEERING DRAWBAR
meeting ENGINE
ISO 5010.
BRAKES
Gear 1-3 . . . . . . . . . . . . . . . . . . . . . . . 134 kW 180 HP/2000 min-1
MinimumWHEELS,
turning radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRONT AND REAR 7.4 m
Gear 4-6 . . . . . . . . . . . . . . . . . . . . . . . 149 kW 200 HP/2000 min-1
Maximum TRANSMISSION
steering range, AND
right or left . . . . . . . . . . . . . . . . . . . . . 49°
FRONT
FRAME AXLE
Gear WEIGHT
7-8 . . . . . . . . . . . . . . . . . . . . . . .
BRAKES (APPROXIMATE) 163 kW 218 HP/2100 min-1 CIRCLE
TORQUE
Articulation
FRAME CONVERTER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25°
E-mode STEERING
Gear 1-3 . . . . . . . . . . . . . . . . . . . . . . . 108 kW 145 HP/2000 min-1 REAR
ENGINE AXLE
Gear TIRES
4-6 . . . . . . . . . . . . . . . . . . . . . . . 134 kW 180 HP/2000 min-1 DRAWBAR
FRAME MOLDBOARD
TANDEM
DRAWBAR DRIVE
Gear 7-8 . . . . . . . . . . . . . . . . . . . . . . . 149 kW 200 HP/2000 min-1 TRANSMISSION AND
BRAKES
Maximum torque . . . . . . . . . . . . . . . . 941 N∙m 96.0 kg∙m/1450 min-1 TORQUE
WHEELS,
CIRCLE CONVERTER
Torque rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 %
FRONT AND REAR
SERVICE
DRAWBAR REFILL CAPACITIES BLADE
FRONT
Service brake . . . . .
CIRCLEF RANGE
AXLE
oot operated, sealed oil disc brakes,
Fan speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. 1500 min-1
FRAME hydraulically actuated on four tandem wheels,
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-stage, dry-type
STEERING
TANDEM
MOLDBOARD 13691DRIVEcm2 total braking surface.
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V with 60 A alternator
DIMENSIONS
CIRCLE Parking brake
HYDRAULICS
REAR
MOLDBOARD . . . .
AXLE actuated, spring applied, hydraulically
M anually
Battery . . . . . . . . . . . . . . . . 2, low maintenance plus, 12 V, 1146 cca
DRAWBAR released caliper.
* : Net horsepower output for standard (SAE J1349) including air cleaner, BRAKES
FRONT
BLADE RANGE AXLE
STANDARD
MOLDBOARD EQUIPMENT FOR BASE MACHINE
alternator (Not charging), water pump, lubricating oil, fuel pump, muffler
INSTRUMENT
WHEELS,
BLADE RANGE FRONT AND REAR
and fan running at minimum speed. CIRCLE
EPA Tier 3 and EU Stage 3A emissions certified. FRAME
REAR
HYDRAULICS AXLE
OPTIONAL
BLADE RANGE EQUIPMENT CAPACITIES (REFILLING)
STEERING
HYDRAULICS
Front Frame Structure
MOLDBOARD
TRANSMISSION AND HeightWHEELS,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mm
DRAWBAR
INSTRUMENT FRONT AND REAR
TORQUE
HYDRAULICS CONVERTER Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATING WEIGHT (APPROXIMATE) 300 mm
BRAKES
INSTRUMENT
Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BLADE RANGE 14 mm
Full power shift transmission with integral free wheeling stator Upper,STEERING
Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm
CIRCLE
CAPACITIES (REFILLING)
torque converter
INSTRUMENT and lock-up. FRAME
DIMENSIONS
CAPACITIES (REFILLING)
HYDRAULICS
Speeds (at rated engine speed) MOLDBOARD
BRAKES
OPERATING WEIGHT (APPROXIMATE)
CAPACITIES
Gear Forward (REFILLING)
Reverse DRAWBAR
STANDARD
OPERATINGEQUIPMENT WEIGHT (APPROXIMATE)
INSTRUMENT
1st 3.4 km/h 4.5 km/h A-shaped, BLADE
FRAME u-section press formed and welded construction for
RANGE
DIMENSIONS
OPERATING
2nd WEIGHT
5.0 km/h (APPROXIMATE)
9.2 km/h maximum strength
CIRCLE
OPTIONAL with a EQUIPMENT
replaceable drawbar ball.
DIMENSIONS
DrawbarCAPACITIES
frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
(REFILLING)
mm x 25 mm
3rd 7.0 km/h 20.3 km/h HYDRAULICS
DRAWBAR
STANDARD EQUIPMENT
DIMENSIONS
4th 10.2 km/h 40.3 km/h MOLDBOARD
STANDARD EQUIPMENT
OPERATING WEIGHT (APPROXIMATE)
5th 15.4 km/h — INSTRUMENT
CIRCLE
OPTIONAL EQUIPMENT
STANDARD
6th EQUIPMENT
22.3 km/h — BLADE
OPTIONAL RANGE EQUIPMENT
Single piece
DIMENSIONSrolled ring forging. Four circle support shoes with
7th 30.6 km/h — replaceable wear surface. Circle
CAPACITIES
MOLDBOARD teeth hardened on front 180° of
(REFILLING)
OPTIONAL
ENGINE
8th 44.3 EQUIPMENT
km/h — circle. HYDRAULICS
DiameterSTANDARD
(outside) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIPMENT 1530 mm
TRANSMISSION AND Circle reversing control hydraulic rotation . . . . . . . . . . . . . . . . . 360°
BLADE
OPERATING RANGE WEIGHT (APPROXIMATE)
TORQUE CONVERTER INSTRUMENT
OPTIONAL EQUIPMENT
HYDRAULICS
DIMENSIONS
TANDEM DRIVE CAPACITIES (REFILLING)
DIMENSIONS
TORQUE CONVERTER BRAKES
BRAKES MOLDBOARD
TANDEM DRIVE FRAME
FRAME
FRONT AXLE
MOTOR
BLADE GR ADER
RANGE GD655-5
DRAWBAR
DRAWBAR HYDRAULICS
REAR AXLE CIRCLE
CIRCLE
ENGINE INSTRUMENT
WHEELS, FRONT AND REAR MOLDBOARD
TRANSMISSION AND
MOLDBOARD
TORQUE CONVERTER CAPACITIES (REFILLING)
STEERING BLADE RANGE
Hydraulic power shift fabricated from high carbon steel. Includes Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416 L
replaceable
BLADE
TANDEMmetal wear RANGE inserts, cutting edge and end bits.
DRIVE Cooling OPERATING
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.9
WEIGHT (APPROXIMATE) L
BRAKES
Cutting edge and end bits are hardened. Crank case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.1 L
HYDRAULICS
Dimensions . . . . . . . . . . . . . . . . . . . . . 3710 mm x 645 mm x 19 mm Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 L
Arc radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HYDRAULICS
FRONT AXLE 329 mm Final drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 L
DIMENSIONS
FRAME
Cutting edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
ENGINE mm x 16 mm TandemINSTRUMENT
housing (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 L
Blade pull Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 L
TRANSMISSION AND
Base GVW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9030 kg Circle reverse housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 L
INSTRUMENT
REAR AXLE STANDARD EQUIPMENT
With scarifier
DRAWBAR
TORQUE GVW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONVERTER 9095 kg CAPACITIES (REFILLING)
With ripper GVW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9910 kg
Blade down pressure
CAPACITIES
WHEELS, FRONT (REFILLING) AND REAR
Base GVW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6985 kg OPTIONAL EQUIPMENT
CIRCLE
TANDEM DRIVE OPERATING WEIGHT (APPROXIMATE)
With scarifier GVW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7925 kg
With ripper GVW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8375 kg
STEERING
OPERATING WEIGHT (APPROXIMATE) Includes lubricants, coolant, full fuel tank
MOLDBOARD
FRONT AXLE Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIMENSIONS 15495 kg
On rear wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11290 kg
BRAKES
DIMENSIONS On front wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4025 kg
BLADEAXLE
REAR RANGE With front mounted scarifier:
STANDARD EQUIPMENT
Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16140 kg
Circle center shift: On rear wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11370 kg
FRAME
STANDARD EQUIPMENT
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HYDRAULICS 590 mm On front wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4770 kg
WHEELS, FRONT AND REAR OPTIONAL EQUIPMENT
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 mm With rear mounted ripper and front push plate:
Moldboard side shift: Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17425 kg
DRAWBAR
OPTIONAL EQUIPMENT
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 mm On rear wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12385 kg
INSTRUMENT
STEERING
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 820 mm On front wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5040 kg
Maximum shoulder reach outside rear tires (frame straight)
CIRCLE
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 mm
CAPACITIES
BRAKES (REFILLING)
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 mm
Maximum lift above ground . . . . . . . . . . . . . . . . . . . . . . . . . . 480 mm
Maximum MOLDBOARD
cutting depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615 mm SCARIFIER (OPTIONAL)
Maximum OPERATING
blade angle, right WEIGHT
FRAME (APPROXIMATE)
or left . . . . . . . . . . . . . . . . . . . . . . . 90°
Blade tip angle . . . . . . . . . . . . . . . . . . . . . 40° forward, 5° backward Middle, V-type
Working width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1430 mm
BLADE RANGE
DIMENSIONS
DRAWBAR Scarifying depth, maximum . . . . . . . . . . . . . . . . . . . . . . . . 210 mm
Scarifier shank holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Scarifier shank holders spacing . . . . . . . . . . . . . . . . . . . . 138 mm
HYDRAULICS Rear
STANDARD
CIRCLE EQUIPMENT
Working width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2186 mm
Load-sensing closed center hydraulics with variable displacement Scarifying depth, maximum . . . . . . . . . . . . . . . . . . . . . . . . 165 mm
piston pump. Short stroke/low effort direct acting control valves
INSTRUMENT Scarifier shank holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
OPTIONAL
with preselected
MOLDBOARD maximum EQUIPMENT
flow setting to each function. Double Scarifier shank holders spacing . . . . . . . . . . . . . . . . . . . . 267 mm
acting anti-drift check valves on blade lift, tip, circle shift, articula-
tion, andCAPACITIES
leaning wheels. (REFILLING)
Output (at engine rated
BLADE RANGErpm) . . . . . . . . . . . . . . . . . . . . . . . 200 L/min
Standby pressure . . . . . . . . . . . . . . . . . . . . . . . . 3.4 MPa 35 kg/cm2
Maximum system pressure . . . . . . . . . . . . . . . 20.6 MPa 250 kg/cm2
OPERATING WEIGHT (APPROXIMATE) RIPPER (OPTIONAL)
HYDRAULICS
Ripping depth, maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 mm
DIMENSIONS Ripper shank holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTRUMENT Ripper shank holder spacing . . . . . . . . . . . . . . . . . . . . . . . . 534 mm
Penetration force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8665 kg
Electric monitoring
STANDARD system EQUIPMENT
with diagnostics: Pry out force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13335 kg
Gauges:CAPACITIES (REFILLING) Machine length increase, beam raised . . . . . . . . . . . . . . . . . 765 mm
Standard . . . . . articulation, engine coolant temperature, fuel
OPTIONAL level, speed
EQUIPMENTmeter, T/M shift indicator, engine
OPERATING tachometer torque converter
WEIGHT oil temperature
(APPROXIMATE)
Warning lights/Indicator:
Standard . . . . . battery charge, brake oil pressure, inching
temperature, directional indicator, engine oil
DIMENSIONS
pressure, hydraulic oil temperature, heater
signal, lift arm lock, parking brake, differential
lock, torque converter oil temperature, eco, P
STANDARD EQUIPMENT
mode, rpm set, high beam, working lights
Optional . . . . . blade accumulator
OPTIONAL EQUIPMENT
17
HYDRAULICS
INSTRUMENT
CAPACITIES (REFILLING)
DIMENSIONS
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT N
M*
I F C B*
J G* D
K E
L* H*
18
TRANSMISSION AND
CIRCLE CONVERTER
TORQUE
MOLDBOARD
ENGINE
TANDEM DRIVE MOTOR GR ADER GD655-5
TRANSMISSION AND
BLADE RANGE
TORQUE
FRONT CONVERTER
AXLE
HYDRAULICS
REAR AXLE
TANDEM DRIVE
INSTRUMENT
WHEELS, FRONT AND REAR
FRONT AXLE
BRAKES
DRAWBAR
STANDARD EQUIPMENT
Engine and Related Items Operator Environment Work Equipment and Hydraulics
•• Double element air cleaner
CIRCLE
OPTIONAL
FRAME and dust
EQUIPMENT •• Cab: low profile enclosed ROPS/FOPS •• Circle, drawbar mounted, 360˚ rotation
indicator. (ISO 3471/ISO 3449) with safety tinted hydraulic blade lift and circle side shift
•• Engine: Komatsu SAA6D107E-1, glass windows with wiper and washer •• Circle slip clutch
MOLDBOARD
DRAWBAR
turbocharged and air-to-air aftercooled, •• Air conditioner (R134a) •• Hydraulic system, closed center, load
standard Variable HorsePower Control, •• Console, adjustable with instrument panel sensing
145-218 net horsepower monitoring system •• Moldboard: 3710 mm x 645 mm x 19
•• CoolingBLADE
CIRCLE RANGE
fan, hydraulic driven with reverse •• Mirrors: interior cab, right and left exterior mm with replaceable end bits, through-
•• Fuel line pre-filter mirrors hardened cutting edges 152 mm x 16
•• Hood-sides for engine compartment •• Seat, deluxe adjustable cloth with mm, hydraulic blade side shift and
HYDRAULICS
MOLDBOARD
•• Air intake extension retractable seat belt hydraulic tilt with anti- drift check valves.
•• Sound suppression, cab and floor mat Maximum moldboard angle position 90˚
Electrical Systems •• Wipers, front, doors ,and rear right & left
INSTRUMENT
BLADE RANGE
•• Alarm, back-up •• 12 V (10 A) power port •• Steering, full hydraulic with tilt steering
•• Alternator 24 V/60 A wheel plus leaning front wheels and frame
•• Battery, extreme duty, 1146
CAPACITIES
HYDRAULICS cca each
(REFILLING)
Power Train articulation w/anti-drift check valves
•• Dome light, cab •• Dual mode Transmission (8F-4R) power •• 9 section hydraulic control valve
•• Horn, electric shift, direct drive and torque converter •• Blade lift float detent style, LH and RH
•• Lights:OPERATING
back-up, stop, tail,WEIGHT
INSTRUMENT with auto shift
directional, (APPROXIMATE)
headlights (2 halogen type, front bar •• Axle, rear full floating, planetary type Other Standard Equipment
mounted) •• Service brakes, fully hydraulic wet disc •• Painting, Komatsu standard color scheme
•• Work lamps: front (4), rear (REFILLING)
CAPACITIES
DIMENSIONS (2) •• Brake, parking, spring applied, hydraulic •• Steps and handrails, rear, right, and left
•• Speedometer release, disc type side
•• Indicators: parking brake, differential •• Differential, lock/unlock •• Vandalism protection includes lockable
STANDARD
lock, blade float, lift arm EQUIPMENT
OPERATING WEIGHT
lock, high beam, (APPROXIMATE) access to fuel tank, battery cover, and
eco, engine P mode, cooling fan reverse, engine side covers
rpm set, engine oil pressure, battery •• Tool box with lock
charge,OPTIONAL
DIMENSIONS EQUIPMENT
brake oil pressure, differential oil •• Fuel tank, ground level access
temperature •• Battery disconnect switch
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
Standard equipment may vary for each country, and this specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your Komatsu distributor for detailed information.
19
https://home.komatsu/en/ Printed in Japan 201802 IP.AD