Professional Documents
Culture Documents
Ultrasonic Examination Report: Report No: Request No: Page No.
Ultrasonic Examination Report: Report No: Request No: Page No.
ULTRASONIC Report No :
Request No :
EXAMINATION REPORT Page No. :
Client : Project No. : Location :
Order / Drg. No : Mark / Item no: Material : Th:
Reference Procedure Specification : Surface Condition : Surface Temp
Acceptance Criteria : Heat Treatment : BSR ASR Weld Process :
Equipment & Technique
Model : SL No: Manufacturer :
Couplant type : Wall Paste Cable Type :
Basic Calibration Block : V1(IIW) V2 (IIW) Calibration block :
Search Unit : Manufacture : Technique :
Probe Angle 0 45 60 70 Weld Joint Sketch
SL No
Dimension
Frequency
Sensitivity
Ref gain
Scanning Employed From :
Range
Calibration Sheet Attached : Yes No
Item / Order / Welder Tested Evaluation
Joint no Result Remarks
Mark No. Drg No. id length Type Length Depth
Note: CR- Crack IP-Incomplete Penetration IF – Incomplete Fusion SL- Slag P- Porosity EP-Excess Penetration
CP- Cluster Porosity CON – Concavity BSR – Before Stress Relief ASR – After Stress Relief
NDT Inspector Approved by Witnessed by
Name
Signature
Level
Date