Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 2

Date 15

Tentative calculations of fuel consumption to generate 1MW power with cost


A) Requirement.
Sno Description UOM value Remarks
1 Steam Temperature Deg c 485 Assumed
2 Steam Pressure Kg/Cm2 65 Assumed
3 Enthalpy of steam Kcal/Kg 807 Standard
Specie steam consumption Of turbine
4 Kg/KWH 3.9 will confirm by TG Manufactur
including all losses .
5 Turbine Net heat rate Kcal/KWH 3147.3 calculation
will confirm by TG /Boiler
6 Blow down , trap and Other losses % 3%
Manufacture./Consultant.
7 Boiler efficiency % 85% Assumed
8 Boiler gross heat rate Kcal/KWH 3838.171 calculation

Heat rate required to Generate 1MW


McCall/MWH 3838.171 calculation
Power.

B) Raw material cost

Specific
GCV
S.NO MATERIAL Consumption . GCV fuel
Fraction
Ratio consumption

% Kcal/Kg Kcal/Kg Kg/MW


1 COAL 30.0 3750 1125 0.529
2 Dolo char 70.0 1500 1050 1.235
3
4
5
6 TOTAL 100 2175 1.765
Composite GCV OF raw material to generate 1MW Power.(McCall/MWH) 3838.2
Raw material cost to generate 1MW POWER

Note: The above calculation are based on assumptions for reference .


Date 15/06/2019.
W power with cost.

Remarks
Assumed
Assumed
Standard

nfirm by TG Manufacture.

calculation
l confirm by TG /Boiler
anufacture./Consultant.
Assumed
calculation

calculation

1.765

Raw material
Rate Per
AMOUNT requirement per
MT coal
day For 15MW
Generation.
RS RS MT
3200 1694.09 190.6
1200 1482.33 444.7
0.0
0.0
0.0
635.3

3176.42

You might also like