Professional Documents
Culture Documents
Technical Information: Series 20 Axial Piston Motors
Technical Information: Series 20 Axial Piston Motors
Technical
Information
Series 20 – Axial Piston Motors
Technical Information
General Description
INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial
piston motors.
DESCRIPTION Sauer-Danfoss axial pistons fixed displacement motors are of swash plate design with
preset displacement suitable for hydrostatic transmissions with closed loop circuit.
The output speed is proportional to the motor’s input flow.
The output torque is proportional to the differential pressure applied to the main
pressure ports.
The direction of motor (output) shaft rotation depends on flow input to the main
pressure ports.
Sauer-Danfoss axial piston fixed displacement motors are well engineered and easy to
handle.
The full-length shaft with a highly efficient tapered roller bearing arrangement offers a
high loading capacity for external radial forces.
High case pressures can be achieved without leakage even at the lowest temperatures
by using suitable shaft seals.
Sauer-Danfoss axial piston units are designed for easy servicing. Complete dismantling
and reassembly can be carried out with standard hand tools, and all components or sub-
assemblies are replaceable.
Axial piston fixed displacement motors of the Sauer-Danfoss pattern are made by
licensed producers worldwide, providing consistent service and fully inter-changeable
parts.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products
already ordered provided that such alterations aren’t in conflict with agreed specifications. All trademarks in
this material are properties of their respective owners. Sauer-Danfoss and the Sauer-Danfoss logotype are
trademarks of the Sauer-Danfoss Group.
Front cover illustrations: P101 XXX, P101 XXX, P101 XXX, P101 XXX
2 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
Contents
DKMH.PN.340.C1.02 • 520L0516 3
Series 20 – Axial Piston Motors
Technical Information
Sectional View
Output
shaft
Valve block
4 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
System Circuit Description
RESERVOIR
CHARGE PRESSURE
RELIEF VALVE
WORKING LOOP (HIGH PRESSURE) WORKING LOOP (LOW PRESSURE) CONTROL FLUID SUCTION LINE CASE DRAIN FLUID
P000 027E
MA
MOTOR CIRCUIT Designation:
SCHEMATIC L2 1 1 = Fixed displacement motor
A 2 = Purge relief valve
3 = Shuttle valve
4
4 = High pressure relief valve
2
3
Ports:
4
A, B = Main pressure ports
(working loop)
B
L1
L1, L2 = Drain ports
MA = Gauge port for port A
M MB MB = Gauge port for port B
P000 034
M = Gauge port - charge pressure
DKMH.PN.340.C1.02 • 520L0516 5
Series 20 – Axial Piston Motors
Technical Information
Technical Specification
Type of mounting
SAE four bolt flanges.
Pipe connections
Main pressure ports: SAE split flange
Remaining ports: SAE O-ring boss
Installation position
Optional; motor housing must be always filled with hydraulic fluid.
16
4
12
3
089
2 8
070
1 4
0 0
0 1000 2000 3000 4000
Driveshaft speed n (min-1) (rpm)
P005 105E
6 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
Technical Specification
Case pressure
Max. rated pressure = 2.5 bar [36.3 psi]
Intermittent = 5.0 bar [72.5 psi]
Hydraulic fluid
Refer to Sauer-Danfoss publication Hydraulic Fluids and Lubricants and Experience with Bio
Fluids for biodegradable hydraulic fluids.
Viscosity range
νmin = 7 mm2/s [49 SUS*]
νmax = 1000 mm2/s [4630 SUS*] (intermittent cold start)
Recommended viscosity range: 12 - 60 mm2/s [66 - 278 SUS*]
Filtration
Required cleanliness level: ISO 4406-1999 Code 22/18/13 or better.
Refer to Sauer-Danfoss publication Hydraulic Fluids and Lubricants and Design Guideline
for Hydraulic Fluid Cleanliness.
Shaft load
The pump will accept radial and axial loads on its shaft, the maximum capacity being
determined by direction and point of application of the load.
Please contact your Sauer-Danfoss representative.
DKMH.PN.340.C1.02 • 520L0516 7
Series 20 – Axial Piston Motors
Technical Information
Technical Specification
1
for higher speeds contact your Sauer-Danfoss representative
Vg • n Vg • n
Input flow Qe = l/min Qe = [gpm]
1000 • ηv 231 • ηv
Vg • ∆p • ηm Vg • ∆p • ηm
Output torque Me = Nm Me = [lbf•in]
20 • π 2•π
Qe • ∆p • ηt Vg • n • ∆p • ηt
Output power Pe = kW Pe = [hp]
600 396 000
Qe • 1000 • ηv Qe • 231 • ηv
Speed n = min-1 n = (rpm)
Vg Vg
8 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 070 and 089 cm3
26.2
F
ØR
Ø N -0.05
Y
52.4
X
ØP
ØO
Shuttle valve
ØH
(both sides)
G
M
Port "A"
Port "L2":
Shaft spline data: * 12.45±0.24
Case drain port
Pitch Ø =S D
Pressure angle = 30˚
Number of teeth = T C
Pitch =U B
A
P000 567E
View Y
Flange design
2/070
V V
Port "A" Port "B"
219
P005 101E
* Shaft spline data: spline shaft with involute spline, according to SAE handbook, 1963, class 1, fillet root side fit.
DKMH.PN.340.C1.02 • 520L0516 9
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 070 and 089 cm3
Rotation
W
45˚ L R
Ø193.5
142.8
168
Ø1
62
Approx. centre
of gravity
+ 0.8
Ø15 – 0.3
168
P005 119E
W
45˚
Rotation
L R
156
168
Ø16
2
Approx. centre
of gravity
+ 0,8
Ø15 – 0,3
168
P005 120
10 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 070 and 089 cm3
A
OUTLINE DRAWING, D
BASIC MODEL Return from purge relief
valve to motor case R3/4
A C B
B
P000 568E
Dimensions
Frame size A mm [in] B mm [in] C mm [in] D mm [in] Weight kg [lb]
070 290 [11.417] 30 [1.181] 12 [0.472] 34 [75]
2 [0.079]
089 307 [12.087] 44 [1.732] 6 [0.236] 41 [90]
A B
25
110
12
100
P000 569E
Dimensions
Frame size A mm [in] Weight 1 kg [lb]
070 315 [12.402] 36 [79]
089 332 [13.071] 43 [95]
1
Light weight and short options available on request
DKMH.PN.340.C1.02 • 520L0516 11
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 070 and 089 cm3
12
Port "A" Port "B"
9.4 ± 0.25
valve for port "B"
Bypass - handle
A
Partial View A-A Bypass valve
opened A
˚
90
3 x Ø 6.5
19.05
Bypass valve
closed
25.4
41.28
50.8
58.55
90
˚
P005 104E
Dimensions
mm mm kg
Frame size A B Weight Port MA and MB Port M
[in] [in] [lb]
426 391 42
070
[16.772] [15.394] [93] 7/16-20 UNF-2B
443 408 49 SAE straight thread O-ring boss
089
[17.441] [16.063] [108]
12 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 070 and 089 cm3
L2
1
5 2
3
B
L1
M MB
P000 035
L2 Designation:
1
Ports:
A,B = Main pressure ports
(working loop)
L1, L2 = Drain ports
B
MA = Gauge port for port A
L1 MB = Gauge port for port B
P000 038E M = Gauge port - charge pressure
DKMH.PN.340.C1.02 • 520L0516 13
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 227 and 334 cm3
36.5
F
ØR
Ø N -0.05
Y
ØO
ØP
79.4
X
Shuttle valve
ØH
(both sides)
F
Port "A"
12.45±0.24
Port "L2":
D Case drain port
C
Shaft spline data: *
Pitch Ø =S B
Pressure angle = 30˚
Number of teeth =T
Pitch =U A
P005 100E-1
View Y View X
CC
Gauge port "MA" Gauge port "MB"
Rotation
45˚
W
X
Gauge port "M"
charge pressure L R
AA
V V BB
Port "A" Port "B"
Z
P005 100E-2
* Shaft spline data: spline shaft with involute spline, according to SAE handbook, 1963, class 1,
fillet root side fit.
14 DKMH.PN.340.C1.02 • 520L0516
Series 20 – Axial Piston Motors
Technical Information
Dimensions – Frame Size 227 and 334 cm3
OUTLINE DRAWING,
CONFIGURATION MS
(continued) Dimensions
Frame mm mm mm mm mm mm mm mm mm
A B C D E F G ØH J
size [in] [in] [in] [in] [in] [in] [in] [in] [in]
498 410 346 228.5 139.7 134.9 152 264 27
227
[19.606] [16.142] [13.622] [8.996] [5.500] [5.311] [5.984] [10.394] [1.063]
537 449 389 278 154 143. 161 292 38
334
[21.142] [17.677] [15.315] [10.945] [6.063] [5.650] [6.339] [11.496] [1.496]
Frame mm mm mm mm mm mm mm mm mm
M ØN ØO ØP ØR ØS T U V
size [in] [in] [in] [in] [in] [in] [in] [in] [in]
38.4 165.1 110 44.03 - 0.17 11.80 42.863 27 143.7
227 16/32
[1.512] [6.500] [4.331] [1.733 - 0.0067] [0.465] [1.688] [1.063] [5.657]
46.2 177.8 114 64.66 - 0.16 14.35 63.500 40 158.7
334 16/32
[1.819] [7.000] [4.488] [2.546 - 0.0063] [0.565] [2.500] [1.575] [6.248]
Frame mm mm mm mm mm mm mm Diameter for mm Weight
W X Y Z AA BB CC
size [in] [in] [in] [in] [in] [in] [in] shaft coupling [in] kg [lb]
156 160 265 265 317.5 20.6 ± 0.4 13 41.28 + 0.062 152
227
[6.142] [6.299] [10.433] [10.433] [12.500] [0.811 ± 0.0157] [0.512] [1.625 + 0.0024] [335]
176 174 298 298 350 27.0 +- 0.5
0.1 18 61.93 + 0.074 197
334
[6.929] [6.850] [11.732] [11.732] [13.780] [1.063 +- 0.0197
0.0039 ] [0.709] [2.438 + 0.0029] [434]
DKMH.PN.340.C1.02 • 520L0516 15
OUR PRODUCTS Sauer-Danfoss Mobile Power and Control Systems
– Market Leaders Worldwide
Hydrostatic transmissions
Sauer-Danfoss is a comprehensive supplier providing complete
Hydraulic power steering
systems to the global mobile market.
Electric power steering
Sauer-Danfoss serves markets such as agriculture, construction, road
Electrohydraulic power steering
building, material handling, municipal, forestry, turf care, and many
Closed and open circuit axial piston others.
pumps and motors
Gear pumps and motors We offer our customers optimum solutions for their needs and
develop new products and systems in close cooperation and
Bent axis motors partnership with them.
Orbital motors
Sauer-Danfoss specializes in integrating a full range of system
Transit mixer drives components to provide vehicle designers with the most advanced
Planetary compact gears total system design.