Professional Documents
Culture Documents
Phutung Wall Footing
Phutung Wall Footing
Isolated Footing 1
1m
Elevation 0.3 m
X 0.725 m
0m
0m
1.45 m
Plan
Input Values
Footing Geomtery
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 2 of 61
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 3 of 61
------------------------------------------------------
Design Calculations
Load Combinations
Moments are About the center of footing / pile cap (does not include moments caused by lateral loads)
------------------------------------------------------
Footing Size
2
Min. area required from bearing pressure, Amin = = 0.53 m
2
Area (A2) = 2.10 m
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 4 of 61
(Service check is performed with footing thickness requirements from concrete check)
------------------------------------------------------
Pressures at 4 Corners
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the
pressure will be redistributed to remaining corners.
Pressure at Pressure at
Pressure at Pressure at
bottom right bottom left
Load Case top left corner top right corner
corner corner
(kN/m2) (kN/m2)
(kN/m2) (kN/m2)
------------------------------------------------------
Stability Check
OTM
1m
Sliding Force
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : N/A
Governing Disturbing Force : N/A
Governing Restoring Force : N/A
Minimum Sliding Ratio for the Critical Load Case : N/A
Critical Load Case for Overturning About X-Direction : 5
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 5 of 61
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction : : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 34.15 kN
Minimum Sliding Ratio for the Critical Load Case : 3.53
------------------------------------------------------
Ultimate Pressure
Area of
Load Case / Pressure at Pressure at Pressure at Pressure at
footing in
Load top left top right bottom right bottom left
Contact with
Combination corner corner corner corner
soil (Au)
ID (kN/m2) (kN/m2) (kN/m2) (kN/m2)
(m2)
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Moment Calculation
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 6 of 61
------------------------------------------------------
X 0.725 m
Z 0.505 m
0.505 m
Plan
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 7 of 61
X 0.725 m
0.505 m 0.505 m
Plan
X 0.725 m
Z
0.115 m
Plan
Ks = = -nan(ind)
Ks x Tc = -nan(ind) kN/m2
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 8 of 61
Reinforcement Calculation
Along X Axis
Along Z Axis
4 - ϕ25
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 9 of 61
4 - ϕ25
Pedestal Design
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 10 of 61
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 11 of 61
0.725 m 0.725 m
Isolated Footing 2
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 12 of 61
1m
Elevation 0.3 m
X 0.675 m
0m
0m
1.35 m
Plan
Input Values
Footing Geomtery
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 13 of 61
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
------------------------------------------------------
Design Calculations
Load Combinations
Moments are About the center of footing / pile cap (does not include moments caused by lateral loads)
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 14 of 61
------------------------------------------------------
Footing Size
2
Area from initial length and width, Ao = = 1.00 m
(Service check is performed with footing thickness requirements from concrete check)
------------------------------------------------------
Pressures at 4 Corners
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the
pressure will be redistributed to remaining corners.
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 15 of 61
Pressure at Pressure at
Pressure at Pressure at
bottom right bottom left
Load Case top left corner top right corner
corner corner
(kN/m2) (kN/m2)
(kN/m2) (kN/m2)
------------------------------------------------------
Stability Check
OTM
1m
Sliding Force
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : N/A
Governing Disturbing Force : N/A
Governing Restoring Force : N/A
Minimum Sliding Ratio for the Critical Load Case : N/A
Critical Load Case for Overturning About X-Direction : 5
Governing Overturning Moment : 15.06 kNm
Governing Resisting Moment : 52.79 kNm
Minimum Overturning Ratio for the Critical Load Case : 3.50
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
Critical Load Case for Overturning About Z-Direction : N/A
Governing Overturning Moment : N/A
Governing Resisting Moment : : N/A
Minimum Overturning Ratio for the Critical Load Case : N/A
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction : : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 16 of 61
------------------------------------------------------
Ultimate Pressure
Area of
Load Case / Pressure at Pressure at Pressure at Pressure at
footing in
Load top left top right bottom right bottom left
Contact with
Combination corner corner corner corner
soil (Au)
ID (kN/m2) (kN/m2) (kN/m2) (kN/m2)
(m2)
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Moment Calculation
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 17 of 61
X 0.675 m
Z 0.455 m
0.455 m
Plan
X 0.675 m
0.455 m 0.455 m
Plan
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 18 of 61
X 0.675 m
Z
0.115 m
Plan
Ks = = -nan(ind)
Ks x Tc = -nan(ind) kN/m2
------------------------------------------------------
Reinforcement Calculation
Along X Axis
Along Z Axis
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 19 of 61
4 - ϕ25
4 - ϕ25
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 20 of 61
Pedestal Design
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 21 of 61
0.675 m 0.675 m
Isolated Footing 3
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 22 of 61
1m
Elevation 0.3 m
X 0.675 m
0m
0m
1.35 m
Plan
Input Values
Footing Geomtery
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 23 of 61
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
------------------------------------------------------
Design Calculations
Load Combinations
Moments are About the center of footing / pile cap (does not include moments caused by lateral loads)
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 24 of 61
------------------------------------------------------
Footing Size
2
Area from initial length and width, Ao = = 1.00 m
(Service check is performed with footing thickness requirements from concrete check)
------------------------------------------------------
Pressures at 4 Corners
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the
pressure will be redistributed to remaining corners.
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 25 of 61
Pressure at Pressure at
Pressure at Pressure at
bottom right bottom left
Load Case top left corner top right corner
corner corner
(kN/m2) (kN/m2)
(kN/m2) (kN/m2)
------------------------------------------------------
Stability Check
OTM
1m
Sliding Force
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : N/A
Governing Disturbing Force : N/A
Governing Restoring Force : N/A
Minimum Sliding Ratio for the Critical Load Case : N/A
Critical Load Case for Overturning About X-Direction : 5
Governing Overturning Moment : 15.06 kNm
Governing Resisting Moment : 52.79 kNm
Minimum Overturning Ratio for the Critical Load Case : 3.50
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
Critical Load Case for Overturning About Z-Direction : N/A
Governing Overturning Moment : N/A
Governing Resisting Moment : : N/A
Minimum Overturning Ratio for the Critical Load Case : N/A
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction : : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 26 of 61
------------------------------------------------------
Ultimate Pressure
Area of
Load Case / Pressure at Pressure at Pressure at Pressure at
footing in
Load top left top right bottom right bottom left
Contact with
Combination corner corner corner corner
soil (Au)
ID (kN/m2) (kN/m2) (kN/m2) (kN/m2)
(m2)
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Moment Calculation
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 27 of 61
X 0.675 m
Z 0.455 m
0.455 m
Plan
X 0.675 m
0.455 m 0.455 m
Plan
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 28 of 61
X 0.675 m
Z
0.115 m
Plan
Ks = = -nan(ind)
Ks x Tc = -nan(ind) kN/m2
------------------------------------------------------
Reinforcement Calculation
Along X Axis
Along Z Axis
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 29 of 61
4 - ϕ25
4 - ϕ25
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 30 of 61
Pedestal Design
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 31 of 61
0.675 m 0.675 m
Isolated Footing 4
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 32 of 61
1m
Elevation 0.3 m
X 0.675 m
0m
0m
1.35 m
Plan
Input Values
Footing Geomtery
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 33 of 61
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
------------------------------------------------------
Design Calculations
Load Combinations
Moments are About the center of footing / pile cap (does not include moments caused by lateral loads)
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 34 of 61
------------------------------------------------------
Footing Size
2
Area from initial length and width, Ao = = 1.00 m
(Service check is performed with footing thickness requirements from concrete check)
------------------------------------------------------
Pressures at 4 Corners
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the
pressure will be redistributed to remaining corners.
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 35 of 61
Pressure at Pressure at
Pressure at Pressure at
bottom right bottom left
Load Case top left corner top right corner
corner corner
(kN/m2) (kN/m2)
(kN/m2) (kN/m2)
------------------------------------------------------
Stability Check
OTM
1m
Sliding Force
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : N/A
Governing Disturbing Force : N/A
Governing Restoring Force : N/A
Minimum Sliding Ratio for the Critical Load Case : N/A
Critical Load Case for Overturning About X-Direction : 5
Governing Overturning Moment : 15.06 kNm
Governing Resisting Moment : 52.79 kNm
Minimum Overturning Ratio for the Critical Load Case : 3.50
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
Critical Load Case for Overturning About Z-Direction : N/A
Governing Overturning Moment : N/A
Governing Resisting Moment : : N/A
Minimum Overturning Ratio for the Critical Load Case : N/A
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction : : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 36 of 61
------------------------------------------------------
Ultimate Pressure
Area of
Load Case / Pressure at Pressure at Pressure at Pressure at
footing in
Load top left top right bottom right bottom left
Contact with
Combination corner corner corner corner
soil (Au)
ID (kN/m2) (kN/m2) (kN/m2) (kN/m2)
(m2)
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Moment Calculation
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 37 of 61
X 0.675 m
Z 0.455 m
0.455 m
Plan
X 0.675 m
0.455 m 0.455 m
Plan
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 38 of 61
X 0.675 m
Z
0.115 m
Plan
Ks = = -nan(ind)
Ks x Tc = -nan(ind) kN/m2
------------------------------------------------------
Reinforcement Calculation
Along X Axis
Along Z Axis
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 39 of 61
4 - ϕ25
4 - ϕ25
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 40 of 61
Pedestal Design
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 41 of 61
0.675 m 0.675 m
Isolated Footing 5
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 42 of 61
1m
Elevation 0.3 m
X 0.675 m
0m
0m
1.35 m
Plan
Input Values
Footing Geomtery
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 43 of 61
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
------------------------------------------------------
Design Calculations
Load Combinations
Moments are About the center of footing / pile cap (does not include moments caused by lateral loads)
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 44 of 61
------------------------------------------------------
Footing Size
2
Area from initial length and width, Ao = = 1.00 m
(Service check is performed with footing thickness requirements from concrete check)
------------------------------------------------------
Pressures at 4 Corners
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the
pressure will be redistributed to remaining corners.
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 45 of 61
Pressure at Pressure at
Pressure at Pressure at
bottom right bottom left
Load Case top left corner top right corner
corner corner
(kN/m2) (kN/m2)
(kN/m2) (kN/m2)
------------------------------------------------------
Stability Check
OTM
1m
Sliding Force
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : N/A
Governing Disturbing Force : N/A
Governing Restoring Force : N/A
Minimum Sliding Ratio for the Critical Load Case : N/A
Critical Load Case for Overturning About X-Direction : 5
Governing Overturning Moment : 15.06 kNm
Governing Resisting Moment : 52.79 kNm
Minimum Overturning Ratio for the Critical Load Case : 3.50
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
Critical Load Case for Overturning About Z-Direction : N/A
Governing Overturning Moment : N/A
Governing Resisting Moment : : N/A
Minimum Overturning Ratio for the Critical Load Case : N/A
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction : : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 39.10 kN
Minimum Sliding Ratio for the Critical Load Case : 4.04
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 46 of 61
------------------------------------------------------
Ultimate Pressure
Area of
Load Case / Pressure at Pressure at Pressure at Pressure at
footing in
Load top left top right bottom right bottom left
Contact with
Combination corner corner corner corner
soil (Au)
ID (kN/m2) (kN/m2) (kN/m2) (kN/m2)
(m2)
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Moment Calculation
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 47 of 61
X 0.675 m
Z 0.455 m
0.455 m
Plan
X 0.675 m
0.455 m 0.455 m
Plan
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 48 of 61
X 0.675 m
Z
0.115 m
Plan
Ks = = -nan(ind)
Ks x Tc = -nan(ind) kN/m2
------------------------------------------------------
Reinforcement Calculation
Along X Axis
Along Z Axis
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 49 of 61
4 - ϕ25
4 - ϕ25
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 50 of 61
Pedestal Design
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 51 of 61
0.675 m 0.675 m
Isolated Footing 6
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 52 of 61
1m
Elevation 0.3 m
X 0.725 m
0m
0m
1.45 m
Plan
Input Values
Footing Geomtery
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Pedestal Height (Ph) : N/A
Pedestal Length - X (Pl) : N/A
Pedestal Width - Z (Pw) : N/A
Design Parameters
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 53 of 61
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
------------------------------------------------------
Design Calculations
Load Combinations
Moments are About the center of footing / pile cap (does not include moments caused by lateral loads)
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 54 of 61
------------------------------------------------------
Footing Size
2
Area from initial length and width, Ao = = 1.00 m
(Service check is performed with footing thickness requirements from concrete check)
------------------------------------------------------
Pressures at 4 Corners
If Au is zero, there is no uplift and no pressure adjustment is necessary. Otherwise, to account for uplift, areas of negative pressure will be set to zero and the
pressure will be redistributed to remaining corners.
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 55 of 61
Pressure at Pressure at
Pressure at Pressure at
bottom right bottom left
Load Case top left corner top right corner
corner corner
(kN/m2) (kN/m2)
(kN/m2) (kN/m2)
------------------------------------------------------
Stability Check
OTM
1m
Sliding Force
Load
Along X- Along Z- Required About X- About Z- Required
Case Resultant
Direction Direction FOS Direction Direction FOS
No.
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding X Direction
Critical Load Case for Sliding along X-Direction : N/A
Governing Disturbing Force : N/A
Governing Restoring Force : N/A
Minimum Sliding Ratio for the Critical Load Case : N/A
Critical Load Case for Overturning About X-Direction : 5
Governing Overturning Moment : 15.06 kNm
Governing Resisting Moment : 49.51 kNm
Minimum Overturning Ratio for the Critical Load Case : 3.29
Critical Load Case And The Governing Factor Of Safety For Overturning and Sliding Z Direction
Critical Load Case for Sliding along Z-Direction : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 34.15 kN
Minimum Sliding Ratio for the Critical Load Case : 3.53
Critical Load Case for Overturning About Z-Direction : 5
Governing Overturning Moment : 6.84 kNm
Governing Resisting Moment : : 49.51 kNm
Minimum Overturning Ratio for the Critical Load Case : 7.24
Critical Load Case And The Governing Factor Of Safety For Sliding Along Resultant Direction
Critical Load Case for Sliding along Resultant Direction : : 5
Governing Disturbing Force : 9.69 kN
Governing Restoring Force : 34.15 kN
Minimum Sliding Ratio for the Critical Load Case : 3.53
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 56 of 61
------------------------------------------------------
Ultimate Pressure
Area of
Load Case / Pressure at Pressure at Pressure at Pressure at
footing in
Load top left top right bottom right bottom left
Contact with
Combination corner corner corner corner
soil (Au)
ID (kN/m2) (kN/m2) (kN/m2) (kN/m2)
(m2)
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Moment Calculation
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 57 of 61
X 0.725 m
Z 0.505 m
0.505 m
Plan
X 0.725 m
0.505 m 0.505 m
Plan
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 58 of 61
X 0.725 m
Z
0.115 m
Plan
Ks = = -nan(ind)
Ks x Tc = -nan(ind) kN/m2
------------------------------------------------------
Reinforcement Calculation
Along X Axis
Along Z Axis
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 59 of 61
4 - ϕ25
4 - ϕ25
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 60 of 61
Pedestal Design
------------------------------------------------------
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019
Page 61 of 61
0.725 m 0.725 m
file:///C:/Users/taman/Desktop/Boundry%20wall/Plugins/waste-1_foundation/Boundary%... 7/24/2019