Professional Documents
Culture Documents
Task Instruction EC&SM 2018 - 042
Task Instruction EC&SM 2018 - 042
To,
Market Performance Centre
Dealerships,
Authorized Service Stations,
Indonesia
Ref: MB HDT Rear Axle lock nut check & replacement – EC&SM – 2018-042
1. Reason :
To ensure tightness of lock nuts in the Rear Axle of HDT trucks, torque of the outer lock nuts to be checked and if
found loosened, lock nuts to be replaced.
2. Vehicles Involved :
Refer attached VIN list Annexure I
3. Procedures :
Refer WIS Document ar35.20-y-0310b
4. Part Involved :
DICV PART
SL.NO PART DESCRIPTION QTY/VEHICLE
NUMBER
NOTE:
1. Lock plate groove nuts to be removed for torque check & to be replaced with new one after
torque check is over.
2. Lock nuts only to be replaced in case of torque loss observed in outer lock nut.
3. Refer Annexure II for identification of dimension checked lock nuts.
5. Warranty Data :