This document provides work instructions for cleaning a nozzle, changing nozzle tips, and cleaning a jig. It lists the operations to be performed, their required frequencies, and who is responsible. Nozzle cleaning is done every 20 parts or if there is a weld defect by the operator. Tip changing is every 2000 parts, if there is an accident, or if the tip is damaged, also by the operator. Jig cleaning is done hourly by the operator.
This document provides work instructions for cleaning a nozzle, changing nozzle tips, and cleaning a jig. It lists the operations to be performed, their required frequencies, and who is responsible. Nozzle cleaning is done every 20 parts or if there is a weld defect by the operator. Tip changing is every 2000 parts, if there is an accident, or if the tip is damaged, also by the operator. Jig cleaning is done hourly by the operator.
This document provides work instructions for cleaning a nozzle, changing nozzle tips, and cleaning a jig. It lists the operations to be performed, their required frequencies, and who is responsible. Nozzle cleaning is done every 20 parts or if there is a weld defect by the operator. Tip changing is every 2000 parts, if there is an accident, or if the tip is damaged, also by the operator. Jig cleaning is done hourly by the operator.
SR. NO. OPERATION FREQUENCY RESPONSIBILITY 20 PARTS / IN CASE OF WELD 1 NOZZLE CLEANING OPERATOR DEFECT 2000 PARTS / IN CASE OF ACCIDENT 2 TIP CHANGE OPERATOR OR DAMAGED 3 JIG CLEANING HOURLY OPERATOR PREPARED BY: APPROVRD BY: