Professional Documents
Culture Documents
2019 GT Tech Book
2019 GT Tech Book
CONTENTS
General Information.....................................................................................................................................2-3
PANTERA................................................................................2017-2019........................................................ 13
GRADE......................................................................................2015-2019........................................................ 14
ePANTERA............................................................................ 2018-2019........................................................ 15
eVERB....................................................................................... 2018-2019..................................................16-17
eTraffic...................................................................................... 2018-2019.......................................................20
BMX............................................................................................ 2018-2019.......................................................20
General Information
• The latest updated version of this Tech Book is available in PDF format at: b2b.cyclingsportsgroup.com.
• The exploded views, illustrations, and photographs are intended only as an aid to identification of available
replacement parts. The frame specifications table are intended as a guide to frame and component
compatibility, not the suitability of any particular part. Ultimately, questions about part compatibility should be
answered by experienced bike mechanics or be directed to GT Technical Support before ordering.
• This Tech Book is NOT a complete or comprehensive service manual for the listed products. To obtain product
manuals, recall information, service bulletins and/or installation instructions please visit: b2b.cyclingsportsgroup.
com.
• Some service kits contain multiple parts, some contain a single part. If a service kit contains multiple individual
parts (e.g. O-rings, fasteners, pivot axles), the multiple parts will be identified by a single kit\- A, B, C...
Servicing Guidelines
• Use a properly calibrated torque wrench when tightening fasteners. Tighten fasteners to the specified torque
value. Clean and apply specified high-quality thread-locking agent (e.g. Loctite™) or grease to the fastener
threads.
• Whenever replacing a service wear item, also replace any related seals, O-rings, and circlips with new ones.
• When replacing parts that have been damaged due to a crash or impact, be sure to clean and inspect other
parts for damage. Take corrective action before replacing damaged or broken parts.
• Damaged or removed bearings should not be re-used. Install new bearings as a set and use the correct bearing
tools.
• Always thoroughly clean all parts and surfaces before assembly. Use a clean, dry shop towel. Do not use
automotive spray chemicals or harsh abrasives to clean; damage to parts, finishes, or decals can result.
• All screws, nuts, bolts, etc. are metric unless noted otherwise.
• Always use the specified high-quality tools, liquids, and lubricants where indicated.
Warranty
For consumer warranty policy: please refer to the GT Limited Warranty available at www.gtbicycles.com.
For dealer warranty guidelines and claims processes: to resolve any warranty issues customers may have, please
refer to our Warranty section at b2b.cyclingsportsgroup.com
Symbols:
This Tech Book uses some icons, abbreviations, and symbols to simplify the information presented on each page.
They are:
NG
LI NGLI-2 synthetic grease Apply NGLI-2 synthetic grease.
-2
CR
B-
GE Carbon Gel Apply carbon gel (friction paste) KF115/
L
4 Medium-strength plastic fastener thread lock Apply Loctite 425 Instant Adhesive or equivalent.
Indicates the specified tightening torque for the fastener. Use a correctly sized
N·m Newton meter
and calibrated torque wrench.
Abbreviation:
ACB - Angular Contact Bearing FT - Front MIN. - Minimum SST - Seat Stay
ALLY - Alloy FTTR - Front Triangle MP - Main Pivot ST- Seat Tube
BB - Bottom Bracket GRDS - Guard mm - millimeters TA - Thru-Axle
BCD - Bolt Circle Diameter GRN - Green MNT - Mount TC - Top Cap
BLK - Black HDWE - Hardware MTN - Mountain w/ - With
BRGS - Bearings HGR - Hanger N/A - Not Applicable WHT - White
BRK - Brake HGRM - Hollowgram NDS - Non-Drive Side Wmn - Womens'
CBL - Cable HT - Head Tube -- Not Pictured UPR - Upper
CR - Chain Ring I.D. - Inside Diameter N·m - Newton Meter
CRB - Carbon (composite) in - Inches O.D. - Outside Diameter
CS - Chain Stay INT - Internal ORG - Orange
CSG - Cycling Sports Grou kg - kilograms p/n - Part Number
DIA. - Diameter kgf - kilogram-force psi - pounds per square inch
DO - Dropout lbs - pounds QR - Quick Release
DS - Drive Side LFT - Left QTY - Quantity
DT - Down Tube LNK - Link RD - Rear Derailleur
EXT - External LWR - Lower RGT - Right
FD - Front Derailleur MAX. - Maximum RR - Rear
36 35
5
2
3 8 5 N·m
I 10
E 49
38
46 C 2 5N
57 6 N·m 59
10 N·m
12
57
13 Direct Mount
F
58
G Standard Mount
56
J
13
H C
25 62
26
J 45
11 10
49 10
52
10 11
C 10 52
49
No. Bearing Dimension (mm)
48 10 ID x 22 OD x 6 H C
B 2
49 12 ID x 28 OD x 12 H
6 N·m
50 17 ID x 30 OD x 7 H C
51 17 ID x 35 OD x 10 H
B
L
ZERO STACK OPTIONS
UPPER 27.5/29
0 mm 31
Offset
S
3.5 mm 28
Offset
LOWER 27.5
0 mm
32
Offset
T
3.5 mm
29
Offset
NGLI-2
LOWER 29
5 N·m 1 N·m B 55 0 mm 33
55
59 40 Offset U
15 M
3.5 mm 30
Offset
14
16 B P
44
51
24 42
34
C 51 N
18 53
50 21
Q
60
47 34 42
1 N·m
61 5 N·m
39 17
15
59
M 2
6
61 47 60
8 N·m 19
O 20
NGLI-2 21
Q
C 22
SANCTION (2016-2019)
Item Specification Item Specification
Wheel Size 27.5 in 216 mm x 63 mm
Rear Shock: Eye-To-Eye /
FT: 21.8 x 8 mm /
Rear Travel 165 mm Stroke / Bushing Width
RR: 21.8 x 8 mm
Head Tube UPR: 1-1/8 in LWR: 1-1/2 in
Sag 33 %
Headset Integrated, 1-1/8 in - 1-1/2 in
Chain Guide ISCG 05
Bottom Bracket: Type/ Width BSA / 73 mm
Rear Brake: Mount Type /
Post Mount / 180 mm
Front Derailleur N/A Min/Max Rotor Dia.
Seat Post: Dia./Binder 31.6 mm / 34.9 mm TA / 142 x 12 mm,
Rear Axle: Type/Length
174.5 mm length
Min. Seat Post Insert 75 mm
ASTM CONDITION 4,
Tire Size x Max. Width 27.5 in x 2.5 in (measured) Intended Use
All-Mountain
Max. Fork Length 569 mm Max. Weight Limit
305 lbs / 138 kg
Total (rider+all equipment):
A
8 N·m
2
6 N·m
D
2
8N
G
2 Standard
M12 Mount
3 N·m
8 N·m
H G
D
B
2
3 N·m
Shimano D-type
I 2
G
6 N·m
SANCTION (2016-2019)
2
3 N-m
2
9 N·m
A
N G 8 N·m
(a)
I.D.
2.5mm
G
2
8 N·m M
L
36mm
24mm
G
K
2
G
6 N·m
E 18 5
1.5N·m
1.5 N·m
H
B
30
24
9
5
6
17
27
A 24
2
B C
3
33
33
C
11
17
31
D 7
19
F A
G 2
8 N·m
J
Standard K
Direct Mount
N 4
26 I 2
8
2 8 N·m
14 32
16 M 2 N·m
2 10
5 N·m
34
29
21
B
15
H
22
N
35
27 1
2 B
25
34
34
2 28
I B
2 L
5 N·m
A 2 I
7 N·m
20
C O
N
G
LI
-2
23
13
9 N·m
C
M B
A
O
2 P
3 N·m
Q M
VERB (2016-2019)
Item Specification Item Specification
Wheel Size 27.5 in 165 x 38 mm
Rear Shock: Eye-To-Eye /
FT: 21.8 mm x 8 mm,
Rear Travel 120 mm Stroke / Bushing Width
RR: 21.8 mm x 8 mm
Head Tube UPR: 1-1/8 in, LWR: 1-1/2 in Sag 25%-33%
Semi Integrated, Chain Guide N/A
Headset
1-1/8 in - 1-1/2 in
Rear Brake: Mount Type /
Bottom Bracket: Type/ Width BSA / 73 mm Post Mount / 160 mm / 180 mm
Min/Max Rotor Dia.
Front Derailleur Rear Axle: Type/Length QR / 135 mm x 9 mm
31.8 mm, Dual Pull
Clamp Dia. / Type
ASTM CONDITION 3,
Seat Post: Dia./Binder 31.6 mm / 34.9 mm Intended Use
Cross-Country, Marathon
Min. Seat Post Insert 75 mm Max. Weight Limit
305 lbs / 138 kg
Tire Size x Max. Width 27.5 in x 2.3 in Total (rider+all equipment):
J 9 N·m
I
2 K
10 N·m N
F H
L
2
8 N·m
K
D
3.0Nm
2
2
3 N-m
B A
Shimano Standard Mount
D-Type
D
B C
2
3 N·m
D
2
3 N·m
GRADE (2015-2019)
Item Specification Item Specification
Wheel Size 700c Tire Size x Max. Width 700c X 35 mm (measured)
Head Tube UPR: 1-1/8 in, LWR: 1-1/4 in Rear Brake: Mount Type /
Post Mount, 160 mm
Min/Max Rotor Dia.
CRB: PF30 / 68 mm
Bottom Bracket: Type/ Width RR: QR / 135 mm x 9 mm
ALLY: BSA / 68 mm Axles: Type / Length
FT: TA / 100 mm x 15 mm
Front Derailleur
Braze-on ASTM CONDITION 2,
Clamp Dia. / Type Intended Use
General Purpose Riding
Seat Post: Dia./Binder 27.2 mm / 30.9 mm
Max. Weight Limit
Min. Seat Post Insert 75 mm 285 lbs / 129 kg
Total (rider+all equipment):
ePANTERA (2018-2019)
Specification Specification
Item Item
ePantera Bolt ePantera Dash ePantera Bolt ePantera Dash
Shimano Tire Size x Max. Width 27.5 in x 2.8 in (measured)
Drive System Shimano E6000
E8000 Max. Fork Length: 522 mm
BT-8010 BT-6010 Brakes: Mount Type /
Battery Post Mount / 160 mm / 180 mm
504 Wh 418 Wh Min/Max Rotor Dia.
Drive-Assist Owners Manual https://si.shimano.com/ MAXLE TA / QR /
Axles: Type/Length
Head Tube UPR: 1-1/8 in LWR: 1-1/2 in 148mm x 12mm 141 mm x 9 mm
Semi Integrated, ASTM CONDITION 3,
Headset Intended Use:
1-1/8 in - 1-1/2 in Cross-Country, Marathon
Bottom Bracket: Type/ Width Shimano Drive Unit Max. Weight Limit:
305 lb / 138 kg
Front Derailleur N/A Total (rider+all equipment):
Seat Post: Dia./Binder 31.6 mm / 35 mm
Min. Seat Post Insert 75 mm
A
B C
2
3 N·m
eVERB (2018-2019)
Item Specification Item Specification
eVerb Amp eVerb Current eVerb Amp eVerb Current
Drive System Shimano e8000 Max. Fork Length: 541 mm
Battery BT-E8010 90 mm x 50 mm
Rear Shock: Eye-To-Eye /
Drive-Assist Owners Manual https://si.shimano.com UPR: 40 mm x 8 mm,
Stroke / Bushing Width
LWR: 30 mm x 8 mm
Rear Travel 120 mm
Recommended Sag: 30%
Head Tube UPR: 1-1/8 in LWR: 1-1/2 in
Chain Guide N/A
Semi Integrated, F
Headset Brakes: Mount Type / Post Mount / 160 mm /
1-1/8 in - 1-1/2 in
Min/Max Rotor Dia. 180 mm
Bottom Bracket: Type/ Width Shimano Drive System
Axles: Type/Length MAXLE TA / 148 mm x 12 mm
Front Derailleur N/A
ASTM CONDITION 3,
Seat Post: Dia./Binder 31.6 mm / 35 mm Intended Use:
Cross-Country, Marathon
Min. Seat Post Insert 75 mm
Max. Weight Limit:
305 lb / 138 kg
Tire Size x Max. Width 27.5 in x 2.8 in (measured) Total (rider+all equipment):
A
Standard Mount
2
12 N·m
2
2.5 N·m
C
N
GL
I-2
5 N·m
1 N·m
eVERB (2018-2019)
E
E
F
2
3 N·m
2
E 12 N·m
G B
N
GL
I-2
N
GL
I-2 E E
N·m
D
6X 2
11 N·m
LockR
(Assembly order 1, 2, 3, 4)
2
(Torque order 1, 4)
1.0 N·m
1
3
4 a Do not install assembled!
5.0 N·m
NGLI-2
m m
5m
3
6m
T25 4
(removal technique)
Installation Removal
1. Disassemble and clean all parts of the LockR axle. Do IMPORTANT: Be sure to support the bike or swingarm to
not install it assembled. prevent personal injury or bike damage when removing/
disconnecting linkages of an axle.
Inspect the parts for damage (burrs, scratches,
deformity, wear). Replace the entire LockR assembly if
any damage is found. 1. Loosen the screw (4) 4-6 turns using a T25 Torx key.
2. Apply a light coating of a high-quality bicycle bearing 2. Tap head of screw (4) with a rubber mallet to un-seat
grease to all parts. the wedge bolt (2).
3. Align the linkage and bearing and insert the threaded 3. Remove the screw (4) and wedge bolt (2) from the axle
end of the pivot axle (1) into the non-drive side. (1).
4. Tighten the inserted pivot axle to 1 Nm using a 6 mm 4. Insert a 5 mm hex key to twist the wedge (3) free and
hex key fitted torque wrench from the non-drive side. remove it (shown). If wedge sticks insert a wooden or
plastic dowel into the drive side and use it to tap out
the wedge (3).
NOTICE
5. Insert a 6 mm hex key into the axle (1) on the non-drive
Use a calibrated torque wrench. Exceeding 1 Nm side and and turn counter-clockwise until it can be
will result in permanent damage to the LockR pivot removed.
system.
5. Insert the wedge bolt (2) into the drive side of the axle
and insert the small end of the wedge (3) into the
non-drive side axle head.
SHIMANO SRAM
Part Number Description
180 160 180 160
KG0066N01 Kit Caliper Bolt XT AOS 180 ✔
USE ONLY THE SPECIAL LENGTH BRAKE CALIPER MOUNTING BOLTS. YOU CAN BE
YOU SERIOUSLY INJURED, PARALYZED OR KILLED IF YOU IGNORE THIS WARNING.
eTRAFFIC (2018-2019)
Part Number Description
K32028 Ebike Frame Grommets
BMX (2018-2019)
Aggressor (2019)
Transeo (2019)
Avalanche (2019)
La Bomba (2019)
Palomar (2019)
Palomar AL (2019)
Minimum Seat Post Insert 100 mm Max. Weight Limit 330 lbs / 150 kg
Performer (2019)
Slammer (2019)
Expert
Micro, Mini
Pro XL24
Expert XL
Junior
Pro
Item Specification Item Specification
Brake: Mount Type / Min/Max
Head Tube UPR: 1-1/8 in, LWR: 1-1/8 in Linear Pull
Rotor Dia.
Front Axle: Type/Length 3/8 in / 100 mm
Bottom Bracket Type/Width Euro
Rear Axle: Type/Length 3/8 in / 110 mm
Expert
Mini
Junior
Mach One 24
Mach One 16
Backwoods 27.5
Backwoods 2017 ATIDH0246
Backwoods 29
2018-2019 ePantera Bolt K33059
ePantera
2018-2019 ePantera Dash ATIDH0233
KG0006N02
eVerb 2018-2019 eVerb
(Standard)
KG0007N02
2015-2019 Force
(Direct)
Force
KG0006N02
2015-2019 Force
(Standard)
K33029
2019
(Direct)
K33039
2019
(Standard)
Fury Fury
KG0022N02
2014-2018
(Direct)
KG0021N02
2014-2018
(Standard)
ATIDH0233
Helion 2015-2018 Helion KG0007N02 (Direct)
KG0006N02 (Standard)
2017 ATIDH0233
Karakoram Karakoram
2013-2016 ATIDH0246
2018-2019 K86019
LaBomba 2011-2014 LaBomba ATIDH0063 (Drive Side)
2011-2014 ATIDH0062 (Non-Drive Side)
Freehub Bodies
Freehub Bodies
Freehub Bodies