Professional Documents
Culture Documents
Moment® Connection Loop
Moment® Connection Loop
Applications
In order to connect 2 precast elements,
both precast elements has to be cast
with the Moment® Connection Loop at
the wall. A rebar will then be inserted
through the intersection of 2 loops.
After placing the rebar, the gap between the precast elements will need to be
grouted using a 40Mpa or 70MPa non shrink grout depending on the
application.
Moment® Connection Loop
Rebar
Non shrink grout
Drawing showing the top view of the connection in between the precast elements
Material
2
Material strength of the Moment® Connection Loop is 1770N/mm and
complies to EN12385-4:2002+A1.
HALFEN MOMENT