Professional Documents
Culture Documents
Grundfos CRN 3 3 A FGJ G e Hqqe
Grundfos CRN 3 3 A FGJ G e Hqqe
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/CRN03/96516830/CRN-3-3-A-FGJ-G-E-HQQE.html
info@lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump
materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high
reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling.
Pipe connection is via combined DIN-ANSI-JIS flanges.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
The pump head and flange for motor mounting is made in one piece (cast iron). The pump head cover
is a separate component (stainless steel). The pump head has a combined 1/2" priming plug and vent
screw.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this
material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, and
the shape of the blades ensure a high efficiency.
The pump has a stainless-steel base mounted on a seperate base plate. This base and base plate are
kept in position by the tension of the staybolts which hold the pump together. The outlet side of the
base has a combined drain plug and bypass valve. The pump is secured to the foundation by four bolts
through the base plate. The flanges and base are cast in one piece and prepared for connection by
means of DIN, ANSI or JIS.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.
The motor is flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor does not incorporate motor protection and must be connected to a motor-protective circuit
breaker which can be manually reset. The motor-protective circuit breaker must be set according to the
rated current of the motor (I1/1).
Technical data
Controls:
Frequency converter: NONE
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technical:
Rated flow: 3 m³/h
Rated head: 15.1 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B
Materials:
Base: Stainless steel
EN 1.4408
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Bearing: SIC
Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 25 bar
Max pressure at stated temp: 25 bar / 120 °C
25 bar / -20 °C
Type of connection: DIN / ANSI / JIS
Size of inlet connection: DN 25/32
Electrical data:
Motor standard: IEC
Motor type: 71A
IE Efficiency class: IE3
Rated power - P2: 0.37 kW
Power (P2) required by pump: 0.37 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 1.74/1.00 A
Starting current: 490-530 %
Cos phi - power factor: 0.80-0.70
Rated speed: 2850-2880 rpm
Efficiency: IE3 73,8%
Motor efficiency at full load: 73.8 %
Motor efficiency at 3/4 load: 79.0 %
Motor efficiency at 1/2 load: 75.5 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Others:
Minimum efficiency index, MEI ≥: 0.7
Net weight: 20.8 kg
Gross weight: 23.4 kg
Shipping volume: 0.054 m³
22
20 100
18 90
16 80
14 70
12 60
10 50
8 40
6 30
4 20
2 10
0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 Q [m³/h]
P NPSH
[W] [m]
350 7
P1
300 6
250 5
P2
200 4
150 3
100 2
50 1
0 0
Stages: 3 14 70
Impellers: 3
12 60
Number of reduced-diameter 0
impellers: 10 50
Low NPSH: N
Pump orientation: Vertical 8 40
Shaft seal arrangement: Single
6 30
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS 4 20
Curve tolerance: ISO9906:2012 3B
Pump version: A 2 10
Model: A 0 0
Materials: 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Q [m³/h]
P NPSH
Base: Stainless steel [W] [m]
EN 1.4408 P1
AISI 316 300 6
Impeller: Stainless steel 250 5
EN 1.4401 P2
200 4
AISI 316
Material code: A 150 3
32
100
1
4
x
1
x
3
1 X G 1/2
29
4 7
G 1/2 105
109
141
210
180
250
150
141
25 bar / -20 °C
Type of connection: DIN / ANSI / JIS
Size of inlet connection: DN 25/32
191
1 1/4 inch
Size of outlet connection: DN 25/32
105
1 1/4 inch G 1/2 G 1/2
1 X G 1/2
Flange size for motor: FT85
Connect code: FGJ
105
140
34
Liquid:
75
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 1.74/1.00 A
LOW VOLTAGE
Starting current: 490-530 % DIRECTION OF ROTATION
cos phi
0.8 1.6
eta
0.6 1.2
0.4 0.8
0.2 0.4
0.0 0.0
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 P2 [kW]
n P1
[rpm] [kW]
n
2800 0.8
P1
2600 0.6
2400 0.4
2200 0.2
2000 0.0
13
x
140
4
105
180
210
32
85
27
x
34
19
x
4
G 1/2
100
141
150
250
109
1 X G 1/2
G 1/2
105
75
191 282
251a
251d
77
28
7
7a 17
301a 219
92 301a
11
92
9
51
11b
105
215a
100
215
49
18
66a
45
67
530a
530
215a 217
6
531a
531
534
534a
3 2 1
TM058200
Printed from Grundfos Product Centre [2018.06.003] 10/13
Exploded view ( TM057026 for MGE model H/I )
251d
251b
291
290
287
277a
287a 273b
293 502
277
252a 286
273a
273
266
275a
268
268a
289a
289
251a 288b
288
288a
252b
159e
150
152
151
157 156
156c
158
185
154
178
172
187
153 191
188
156d
156b
192
156c
159d