Professional Documents
Culture Documents
Final Demo LP 1
Final Demo LP 1
Poblacion Campus
Grade-8 Dragonfruit
I. Objectives
Values Integration
Not everyone is gifted in visualizing a 3D form of an object into in its 2D form of a drawing. This
topic will enhance learner to visualize everything that captures into their beautiful gifted eyes into an
orthographic drawing. Like in real life sometimes we cannot imagine anything without the proper
illustration of a something.
Performance Standard
The learner shall be able to read and interpret technical drawings and work plans accurately.
II. Subject Matter: Assembly drawing used in technical plans: Orthographic Drawing
References: K-12 Mechanical Drafting for grade 7/8 learning module pages 85-94, Manaois, German M.
Drafting Volume 1 book ( 2008) pp 52-55.
Instructional Materials: Model, mock up, television set, visual aide, drafting tools and materials.
Process Skills Involved: Manipulation of drafting tools and materials, visualizing an object, measuring/
dimensioning.
III. Learning Procedure
A. Preparation
Good afternoon my dear students, how are you? Good afternoon too sir , we are fine sir.
B. Motivation
Hello! Hi Sir
Hi Hello Sir
Bottom view
Top view
C. Presentation/Review
our topic for today? It is all about front, rear, left side, right side, bottom
and top view sir.
D. Lesson Proper
to read? Sir
words and what are these two words? Orthographic came from two
Very good
There are six principal views of an object
which are? The top, front, right side, left side, top, bottom and
rear view sir.
only three primary views namely The front, right side view and top view sir.
Thank you, and how about side view, anyone? The depth of the top view is the same as the depth of
the side view.
projection. Anyone who wants to read? 1. Frontal plane use to project lines on the front
view.
E. Application
lesson.
F. Generalization
today? Sir
orthographic drawing which is 5 item test. Learner will answer the given question with the
utmost honesty and their own ability.
B. Performance Activity
orthographic drawing. (The learner will try to draw the given object
drawing into its orthographic views beside the object
drawing. Learners must apply the procedures being
discussed.)
Rubrics in Scoring the knowledge and skill of the learner in Orthographic Drawing
Points Criteria
10 A. The learner answered 5 from the questions correctly.
B. The learner able to draw and solve the object correctly with a
Very Good neat output
A. The learner answered 4 from the given question correctly.
8 B. The learner able to draw the view but 1-2 of the lines are not being
Good drawn.
A. The learner obtained a score of 3 points correctly.
6 B. The learner able to draw but 3-4 of the lines are not being drawn or
Fair missing.
A. The learner obtained a score of lower than 2.
4 B The learner able to pass s the drawing but 5 amd beyond lines are not
Needs Improvement being drawn.
V. Assignment
2.Review well the steps and concepts and we will draw another orthographic drawing tomorrow.
Prepared by:
Student Teacher
Checked by:
RICHARD L. OLIQUIANO
Noted by:
Noted by:
School Principal IV