Professional Documents
Culture Documents
Verifying The Result With Theoretical Definition
Verifying The Result With Theoretical Definition
PROCEDURE:
1)Place OPAMP(LM741), Resistance(R/Analog) and Voltage input
(Vsin/Analog) as depicted above in the circuit diagram.
2)Place DC voltages at points (4) and (7) with orientation as shown in the
circuit diagram.
3)Connect wires and put probes at positive terminal of input and at
point (6).
4)Place ground and enter values of resistance and input and run.
SNAPS OF OUTPUT:
INVERTING AMP
NON-INVERTING AMP
INFERENCE: Initially when input amplitude was 5V observed output was -15V
but theoretically its expected to be -50V whereas when input changed to 1V
observed output was -10V as expected theoretically.
This is because OPAMP is powered till 15V which limits the output voltage
above 15V initially.
ATTESTATION:
_______________XXXX_______________XXXX______________________