Professional Documents
Culture Documents
Roc Ropa Practical Questions
Roc Ropa Practical Questions
1.How to switch on/off radar.Set the radar for prevailing condition
2.What is gain and how to adjust the gain
3. What is tuning and how to adjust the tuning? 4 smooth sea, how will you understand the proper
tuning of your radar?
5.What is sea clutter and how will you adjust it? 6. What is rain clutter and how will you adjust it? 7
Determine range and bearing of a closest target.
8.what is range discrimination and how will you minimize it?9. What is bearing discrimination and how
will you minimize it?
10. What is x-band and s-band radar? What is the difference between them?
11 Describe shadow sector, shadow area and blind sector.
12 Describe sidelobes echo multiple echo,2nd trace echo and indirect echo
13 What is angle of squint How will you correct it? 14. What is performance monitor and how will you
test the efficiency of the radar?
15. What is guard zone? danger of guard zone 16. What is radar interference and how will you minimize
it?
17.Gyro fail, what is your action? Difference between head up and north
18. Plot a position by radar fix(At Least two brg). Draw pl and transfer it on the radar.
19. How will you check the presence of target which is on your right ahead?
20 What is true and relative motion?
21 what is sea stabilize and ground stabilize? What are the uses
You have two radar se no-1 and no-2. Antenna no 1 radar is not working,can u use the Antenna of no 2
to operate no-1 radar.
23 Describe radar reflector.
24 what is the reacon remark? What is the difference between them? How do u understand that which
racon will be detected and by “s” band and “x” band radar,?
25. How will you maintain radar log book?
26 What is SART, How will you detect survival craft when you are within 1 mile of craft?
27 what is trial maneuver? Explain by using radar? What time can resume course?
28 What is target swap and how will you minimize it?
29 How many targets you can acquire manually and automatically?
30.What is true and relative vector?
31. What is aspect?
32. Candidates must understand and determine the head on, crossing and overtaking situation and the
action,
33 How do you set CPA?
34. Describe the arpa errors.
35 How will you test arpa?
36,Measure range and bearing between two objects(off centre EBL and VRM).
37. Mark a anchor position(off centre EBL/VRM, Drop marker).
38 Find CPA and TcPA without ARPA.(By using Trail).
39. Find CPA and TCPA without ARPA.& Trail. (By EBL).
40. EBL or VRM not working, measure the range and bearing
41 How can you calculate set and drift of current? 42 Heading/SPD error How that effect the other vessel
data?
43 How can you check your VRIM at anchor? 44. Find the bunker barge.Advice master the heading and
TTG to bunker barge.