Installation Instructions: LRM1070, LRM1080

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

LRM1070, LRM1080

Movement detector

Installation Instructions
Instructions d’installation Istruzioni per l’installazione Installationsanweisungen 安装指示书
Instrucciones de instalación Installatie-instructies インストール手順 ‫إرشادات التركيب‬

ø 80 (3.15 in) 1a
1 2 1 > 50 mm (1.97 in)
50 mm (1.97 in)
52 mm (2.1 in)

≤ 30 mm (1.18 in)
(0.08 in)
2 mm

ø95 mm (3.7 in)

max 185 mm (7.28 in)

Ceiling box (LRH1070)


35 mm
(1.4 in)
(2.20 – 2.60 in)
56 – 66 mm

No. 8 (ø 4 mm)
1b optional 1 3

22 x 10 mm (0.87 x 0.39 in)


51.5 mm
(2.0 in)

25 x 13 mm (0.98 x 0.51 in)


25 x 16 mm (0.98 x 0.63 in)
16 x 16 mm (0.63 x 0.63 in) 4 5
LRH1070
ø 95 mm (3.7 in) LRM1070
LRM1080

max
50° C
kg
min 0.12 kg
5° C

3222 636 49842 22 October 2018 www.philips.com/lighting


2 1 Ls L N 3 3
2 Ls L N

- +
H05VV-F

5
4

Wieland cable (LCC1070)


L

4 LRM1070 L 5
N

Ls L N Ls L N

2.7 m (8.86 ft)


LRM1080 L3
L2
L1
N

Ls L N Ls L N
6.0 m (19.69 ft)
-+ -+

+
- 8 m (26,25 ft)

6 7

Time = (a) Lux = (b)


Min. = 1 min. Min. = 250 lux
Max. = 30 min. Max. = 1000 lux
ON on Auto on
ON
12

MIN 1 2
off IR on

(max) LRM1070 LRM1080


and only
(min) LRM1080

This table is prepared in accordance with the provisions of


Hazardous Substances SJ/T 11364.
Type LRM1070 LRM1080 O: Indicates that said hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement
Lead (Pb) x x of GB/T 26572.
Mercury (Hg) 0 0 X: Indicates that said hazardous substance contained in at least
one of the homogeneous materials used for this part is above the
Cadmium (Cd) 0 0 limit requirement of GB/T 26572.
Hexavalent Chromium (Cr (VI)) 0 0
Polybrominated biphenyls (PBB) 0 0 B Warning
The connector of the OccuSwitch is capable of accepting a
Polybrominated diphenyl ethers (PBDE) 0 0 wide range of cables (1.5 to 2.5mm2), but when heavy ridged
cables (especially single core) are used it is strongly advised to
make use of the LCC1070 to prevent the OccuSwitch of being
pushed out of the ceiling due to the weight of these ridged
cables.

© 2018 Signify Holding. All rights reserved. Specifications are


subject to change without notice. No representation or warranty
as to the accuracy or completeness of the information included
herein is given and any liability for any action in reliance thereon is
disclaimed. Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. All other trademarks are
owned by Signify Holding or their respective owners.
3222 636 49842 22 October 2018 www.philips.com/lighting

You might also like