The document provides measurement data for the alignment of a turbine to a gearbox. It lists RPM, alignment corrections in inches that need to be made to the turbine for both vertical and horizontal alignment, offset measurements in inches for different alignments of the gearbox, and acceptable misalignment tolerances in mils per inch. It also notes the status of the alignment as acceptable, in need of realignment, or whether corrections should move it up, down, left or right.
The document provides measurement data for the alignment of a turbine to a gearbox. It lists RPM, alignment corrections in inches that need to be made to the turbine for both vertical and horizontal alignment, offset measurements in inches for different alignments of the gearbox, and acceptable misalignment tolerances in mils per inch. It also notes the status of the alignment as acceptable, in need of realignment, or whether corrections should move it up, down, left or right.
The document provides measurement data for the alignment of a turbine to a gearbox. It lists RPM, alignment corrections in inches that need to be made to the turbine for both vertical and horizontal alignment, offset measurements in inches for different alignments of the gearbox, and acceptable misalignment tolerances in mils per inch. It also notes the status of the alignment as acceptable, in need of realignment, or whether corrections should move it up, down, left or right.
The document provides measurement data for the alignment of a turbine to a gearbox. It lists RPM, alignment corrections in inches that need to be made to the turbine for both vertical and horizontal alignment, offset measurements in inches for different alignments of the gearbox, and acceptable misalignment tolerances in mils per inch. It also notes the status of the alignment as acceptable, in need of realignment, or whether corrections should move it up, down, left or right.
Turbine to Gearbox vertical correction Turbine to Gearbox horizontal correction
F1 -0.0045” Move Down F1 0.055” Move Left F2 -0.050” Move Down F2 0.090” Move Left Plus : Move Up Minus : Move Down Plus : Move Left Minus : Move Right F1 ( Near Foot ) / Inch F2 ( Far Foot ) / Inch
Vertical Offset Misalignment Tolerance Keterangan
Parallel Driven ( - 0.0038”) / Inch gap coupling 3.8 mils per-inch Realignment Parallel Driver ( 0.002”) / inch gap coupling 2.0 mils per-inch Realignment Angular ( -0.0018”) / inch gap coupling 1.8 mils per-inch Realignemnt