Professional Documents
Culture Documents
Activation of Spare Channels For LYNGSO UCS 2100
Activation of Spare Channels For LYNGSO UCS 2100
To start activation of a spare channel you must open the spare channel list. First open the
Maintenance dialogue.
- Click with the left tracker ball/mouse key on the text Diagram in the Menu bar, this will
open a “drop down” list of diagrams, select Maintenance with the cursor and click with the
left key.
Click on the Spare Channel button (the button is greyed if the “activate spare channel” option
is not included in this system), and the spare channel list will be opened.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 40 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
As default the list will display all spare channels both channels that currently are vacant and
channels that has previously been activated.
Remove the checkmark for Activated to se only channels that still are vacant.
Select the sensor type you want to connect by removing the checkmark for all other sensor
types, now you will se a list of spare channels for the selected sensor type in all PLC’s.
If you already know to which PLC the sensor should be connected you can select only to
display spare channels for this PLC.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 41 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
Click on the Activate field , to open the first page of the channel definition, and
then the following window will appear.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 42 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 43 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 44 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
When the fields in this window are corrected click on the Finish button and the definition of
the new monitoring channel will be transferred to the Gamma PLC and the other operator
stations. The new monitoring channel will be active immediately.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 45 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
Select the channel you want to activate by clicking on the line, and then click on the Edit
button, and the window below will appear.
Click on the Activate field , to open the first page of the channel definition, and
then the following window will appear.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 46 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
After this page is finished click on the Next button and next page will appear.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 47 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
- Message text / Normal state: Click on the button and select one of the texts. The
selected text will be displayed when the channel is in
normal state.
- Alarm Limit 1:
- Type: Click on the button and select the type of function for this
alarm, select between NOT USED, LOW LIMIT and HIGH
LIMIT.
- NOT USED means that there is no alarm based on this
limit.
- LOW LIMIT means that alarm is generated if the value of
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 48 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
- Limit 2 A monitoring channel can have op to 3 alarm limits. If type for limit 2 is
selected different form NOT USED parameters for the second alarm limit
can be keyed in, and Limit 3 is made visible.
The meaning of parameters for limit 2 and 3 is the same as described
above for limit 1.
When the fields in this window are corrected click on the Finish button and the definition of
the new monitoring channel will be transferred to the Gamma PLC and the other operator
stations. The new monitoring channel will be active immediately.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 49 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
2.3.14 Change definition of alarm channels, e.g. name, texts and scaling.
From the operator station it is possible to make some changes in definition of alarm channels
online. The parameters that can be changed are:
- Name of the channel
- Membership of Alarm System
- Membership of Alarm Groups
- Input definition NO or NC for binary channels
- Input scaling block for analog channels
- Message text
- Alarm priority
For some channels some of the parameters are locked e.g. if the channel is used by the
control system.
Changes in a channel will be active immediately after closing the definition window by
clicking the OK button. The changes will be transferred to the other operator stations and the
PLC’s (for printer and panel indication).
Changes can be uploaded by a service engineer and imported in the system database, also
changes of alarm limits, delays and hour counter values can be uploaded and imported. This
means that changes will not get lost in case of a new generation and download of the
database.
NB: Changes are not included in the backup of the PLC code that is present on the operator
stations. This means that changes will be lost if a PLC is loaded from the SystemStatus
diagram on the operator station, e.g. after replacement of faulty PLC. On the other hand
this can also be use to clean up a system if some unsuccessful changes have been made.
Because of this it is important to write down all changes made online, so you are able
to remake the changes in case of a new download is needed.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 50 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
On this page Name, Alarm System, Included in data log and Alarm Groups can be changed.
Click on the Input/Limits tab to change to next page, shown below for an
analog channel.
Lyngsø Marine
970.505.742
UCS 2100, User Manual Page 51 of 53
Operating instruction for Graphic Operator Station (GOS) 2001.06.01
On this page Input scaling block and message texts can be changed.
The Channel Definition diagrams are the same as used for activation of spare channels, so for
details about the parameters refer to the two sections 2.3.13.1 Activate binary channels and
2.3.13.2 Activate analog channels.
Lyngsø Marine
970.505.742