Professional Documents
Culture Documents
New Features
New Features
1. New design for the Connection Panel. This new design improves VPN Client
user experience by simplifying the management of VPN connections. The New
Connection Panel is fully configurable via a dedicated management window
which enables to create, rename and sort VPN connections.
2. Added a verification of the gateway certificate subject (SSL).
3. Using WiFi networks sometimes requires a local authentication (via a captive
portal). For users using the GINA Mode (VPN Connection before Windows
logon), the VPN Client implements a new browsing window which allows the
authentication on the captive portal before opening the tunnel.
4. Always-on: automatically re-opens tunnel when DPD timeout is detected.
5. New certificate selection criteria: It is possible to configure a pattern to be
found in the certificate subject.
6. Always-on: automatically re-opens tunnel when remote network is no longer
accessible.
7. "No Split DNS": Ability to force the physical DNS server address to the value
of the Virtual DNS Server address. This function solves communication
slowness and confidentiality problems.
8. "No Split Tunneling": Ability to disable default route on physical interface for
all, in tunnel configurations.
9. New "/closeall" command line option (close all tunnels).
10. New "/resetike" command line option.
11. Mode Config / Mode CP: Support of Virtual network size sent by the gateway
(by default /24 when not specified).
12. Option to check the gateway certificate CRL in addition to its signature.
13. Copy / paste of IKEv2 and SSL configurations.
14. Support of UTF-8 character encoding for X-Auth password (requires a specific
configuration).
Bug Fixes:
Upgrade Procedure:
1. Using the Download Link below, download and extract the new firmware to a
convenient place such as your desktop.The filename after extracting
is NETGEARVPNClientPro_Setup.exe
http://www.downloads.netgear.com/files/GDC/VPNG05L/NETGEARVPNClie
ntPro_Setup_V6.40.004.zip
If you find an error, you can gather additional information to aid NETGEAR in resolving
your problem:
1. Activate the detailed log with CTRL+ALT+D ("Trace mode is on" will appear
in the main banner).
2. Reboot the PC.
3. Run the VPN Client and try to re-create the issue.
4. Log on to https://my.netgear.com to submit a Support ticket and make sure you
include the following in your Support ticket:
5.
o A description of the error
o Your VPN client configuration Policy file
o Log files located at: C:\Program Files\NETGEAR\NETGEAR ProSAFE
VPN Client Professional\LogFiles