Professional Documents
Culture Documents
Transverse Loading in Beams - Additional Problems
Transverse Loading in Beams - Additional Problems
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22) A cantilever of length 4m carries a UDL of 1kN/m run over the whole length and a point load of 2kN
at a distance of 1m from the free end. Draw the SFD and BMD.
23) A cantilever of 2m loang is loaded withUDL of 2kN/m run over a length of 1m from the free end. It
also carries a point load of 4kN at a distance of 0.5m from the free end. Draw SFD nd BMD.
24) A cantilever of length 6m carries two point loads of 2kN and 3kN at a distance of 1m and 6m from
the fixed end respectively. In addition to this the beam also carries a UDL of 1kN/m over a length of 2m
ata distance of 3m from the fixed end.
25) A beam of length 10m is simply supported at its ends. It is loaded with point loads of 5kN each at a
distance of 3m and 7m from the left support also a UDL of 1kN/m between the point loads. Draw the
SFD and BMD.