Professional Documents
Culture Documents
Which Two Benefits Are Provided by Creating VLANs
Which Two Benefits Are Provided by Creating VLANs
Which Two Benefits Are Provided by Creating VLANs
VLAN Questions
1. Which two benefits are provided by creating VLANs? (Choose two)
a. Dedicated bandwidth
b. Allows switches to route traffic between subinterfaces
c. Provides segmentation
d. Added security
e. Contains collisions
2. On corporate network, hosts on the same VLAN can communicate with each other, but
they are unable to communicate with hosts on different VLANs. What is needed to allow
communication between the VLANs?
3. Which two circumstances can cause collision domain issues on VLAN domain? (Choose
two)
a. Duplex mismatches on Ethernet segments in the same VLAN
b. Multiple errors on switchport interfaces
c. Congestion on the switch inband path
d. a failing NIC in an end device
e. an overloaded shared segment
VLAN Questions
5. VLAN 3 is not yet configured on your switch. What happens if you set the switchport
access vlan 3 command interface configuration mode?
a. The command is accepted and the respective VLAN is added to vlan.dat
b. The command is rejected
c. The port turns amber
d. The command is accepted and you must configure the VLAN manually
Name :
ANSWER KEY
VLAN Questions
1. Which two benefits are provided by creating VLANs? (Choose two)
a. Dedicated bandwidth
b. Allows switches to route traffic between subinterfaces
c. Provides segmentation
d. Added security
e. Contains collisions
2. On corporate network, hosts on the same VLAN can communicate with each other, but
they are unable to communicate with hosts on different VLANs. What is needed to allow
communication between the VLANs?
3. Which two circumstances can cause collision domain issues on VLAN domain? (Choose
two)
a. Duplex mismatches on Ethernet segments in the same VLAN
b. Multiple errors on switchport interfaces
c. Congestion on the switch inband path
d. a failing NIC in an end device
e. an overloaded shared segment
VLAN Questions
5. VLAN 3 is not yet configured on your switch. What happens if you set the switchport
access vlan 3 command interface configuration mode?
a. The command is accepted and the respective VLAN is added to
vlan.dat
b. The command is rejected
c. The port turns amber
d. The command is accepted and you must configure the VLAN manually