Professional Documents
Culture Documents
5-Aircraft Fabric Covering Text
5-Aircraft Fabric Covering Text
5-1 B01
When and how is finishing tape applied on a fabric 5-1. Answer B. JSAT 5-21 (AC43.13-1B)
covered aircraft? Finishing tape is used to cover all the lacing, and it must
be of at least the same width and quality as that used on
A Doped on immediately prior to the finish coat. the original airplane. It is applied with dope, after the first
B Doped on after the first or second coat of dope. or second coat of dope has dried.
C Sewed or laced on before dope is applied.
5-2 B01
The determining factor(s) for the selection of the correct 5-2. Answer C. JSAT 5-6 (AC65-15A)
weight of textile fabric to be used in covering any type of The quality and strength of fabric, surface tape, lacing
aircraft is the cord, and thread, etc. are determined by the aircraft's
never-exceed speed and the pounds per square foot of
A speed of the aircraft.
wring loading.
B maximum wing loading.
C speed of the aircraft and the maximum wing loading.
5-3 B01
How many fabric thicknesses will be found in a French fell 5-3. Answer B. JSAT 5-17 (AC43.13-1B)
seam? The French-fell seam is illustrated in the above references.
A Three.
B Four.
C ive.
5-4 B01
Finishing tape (surface tape) is used for what purpose? 5-4. Answer C. JSAT 5-8 (AC43.13-1B)
The purpose of finishing tape is to blend the covering
A To provide additional anti-tear resistance under rein- around contours and irregularities. The tape prevents
forcement tape. covering material from coming loose in flight.
B To help prevent "ripple formation" in covering fabric.
C To provide additional wear resistance over the edges of
fabric forming structures.
5-5 B01
Moisture, mildew, chemicals, and acids have no effect on 5-5. Answer A. JSAT 5-17 (AC65-15A)
Glass cloth is not affected by moisture, mildew, chemicals,
A glass fabric. or acids.
B linen fabric.
C dacron fabric.
5-2 Building Professional Experience