Pruebas y Certificación SSN

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

ANSI B109 Testing and Certification

Summary for the SSN Gas Interface


Management Unit (IMU)
Introduction
ANSI B109 is a basic standard for safe operation and substantial and durable construction for diaphragm
and rotary-type gas displacement meters and regulators. The standard consists of B109.1 – B109.4
which applies to various flow rates and types of meters and devices for gas measurement. The standard
is designed to help ensure efficient performance and substantial construction of equipment. As this is
the most common standard for gas measurement devices, SSN’s gas AMI products are tested and
approved to the applicable parts of the standard.

This summary document and associated exhibits provides a summary of the testing and approvals for
SSN’s Gas IMU products and the associated test report artifacts as requested by ConEd for PSC of NY
Approval of the GAS IMU for AMI.

Note: ANSI B109 is the Gas Measurement equivalent to the ANSI C12 standards for Electricity metering.

List of Exhibits

Exhibit # Description IMU Family Reference


Exhibit 1A ESL26505-GENRev1: MET Labs, Environmental Residential IMU300/300A
Testing, SSN Residential Gas IMU, ANSI B109.1
and ANSI C12.1
Exhibit 1B ESL32999-GENRev1: MET Labs, Environmental Residential IMU300/300A
Testing, SSN Residential Gas IMU, ANSI B109.1
and ANSI C12.1
Exhibit 2 ESL28001-GEN: MET Labs, Environmental Commercial IMU200
Simulation Test Report, SSN Commercial Gas
IMU, ANSI B109.3 and ANSI C12.1
Exhibit 3A Residential IMU Gas Meter Accuracy Test Residential IMU300/300A
Report
Exhibit 3B Commercial IMU Gas Meter Accuracy Test Residential IMU200
Report
Exhibit 4 Gas IMU Compatibility by Meter All
Exhibit 5 IMU Multi-Data Element Label All

Rev: 11/01/16 Page 1 of 5


Applicable B109 Standards and Testing Matrix
The SSN Gas Interface Management Unit (IMU) is considered an AUXILLIARY DEVICE in the B109
standard. AUXILLIARY DEVICES are defined as devices used with a meter to provide an adjustment of the
meter reading, to permit obtaining special information, or to transmit information to a remote location.

The following B109 standard sections were identified by the PSC as relevant to the use of the SSN Gas
IMU for AMI applications. The following table lists the associated standards with notes regarding
applicability to IMU models, and reference to the associated test report Exhibits. Note that additional
test references are also listed for other B109 and C12.1 tests that were also performed.

Residential
Residential Actaris/Sprague/Nat/La
American/Rockwell ncaster Commercial
B109 Specification IMU300 IMU300A IMU200 Applicability Notes
2.7.3.5 Index and Markings are molded Markings are molded Markings are molded ANSI B109 does not
markings shall not be into plastic and/or into plastic and/or into plastic and/or specify a particular test
adversely affected by marked using marked using marked using however SSNI's design
environmental weatherproof label weatherproof label weatherproof label is compliant via molded
conditions. Exhibit 5: IMU Multi Exhibit 5: IMU Multi Exhibit 5: IMU Multi markings and
Data Label Data Label Data Label weatherproof labels
used. Tested also via
2.9.1 Accelerated
Weathering Test

2.9.1 Accelerated Exhibit 1B: ESL32999- Exhibit 1B: ESL32999- Exhibit 2: ESL28001- Note: See ANSI C12.1
Weathering Test GENRev1: MET Labs GENRev1: MET Labs GEN: MET Labs Report, test#36 which is
Report, Environmental Report, Environmental Environmental Testing, equivalent to ANSI
Testing, SSN Residential Testing, SSN Residential SSN Commercial Gas B109.1 2.9.1
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1 IMU, ANSI B109.3 and
and ANSI C12.1 and ANSI C12.1 ANSI C12.1

2.9.3 Chemical Exhibit 1A: ESL26505- Exhibit 1A: ESL26505- NA; IMU200 Commercial Note: NA for
Resistance Test (for GENRev1: MET Labs GENRev1: MET Labs does not replace index Commercial IMU which
meter index window Report, Environmental Report, Environmental cover does not replace index
or cover) Testing, SSN Residential Testing, SSN Residential cover
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1
and ANSI C12.1 and ANSI C12.1

2.10 Meter Index Exhibit 1A: ESL26505- Exhibit 1A: ESL26505- NA; IMU200 Commercial Note: NA for
window Impact Test GENRev1: MET Labs GENRev1: MET Labs does not replace index Commercial IMU which
Report, Environmental Report, Environmental cover does not replace index
cover
Testing, SSN Residential Testing, SSN Residential
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1
and ANSI C12.1 and ANSI C12.1

Rev: 11/01/16 Page 2 of 5


Residential
Residential Actaris/Sprague/Nat/La
American/Rockwell ncaster Commercial
B109 Specification IMU300 IMU300A IMU200 Applicability Notes
2.11 Meter Index Exhibit 1A: ESL26505- Exhibit 1A: ESL26505- NA; IMU200 Commercial Note: NA for
Clearness Test GENRev1: MET Labs GENRev1: MET Labs does not replace index Commercial IMU which
Report, Environmental Report, Environmental cover does not replace index
cover
Testing, SSN Residential Testing, SSN Residential
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1
and ANSI C12.1 and ANSI C12.1

3.3.3 Accelerated Life 4k hr test @ ConEd 4k hr test @ ConEd 4k hr test @ ConEd


Test
6.1.4 Auxiliary Device Exhibit 5: IMU Multi Exhibit 5: IMU Multi Exhibit 5: IMU Multi NEW label per PSC
Identification - Refer Data Label Data Label Data Label request for additional
to section 6.3.3 information. 3M 7871,
UL listed (File
MH16411) for
outdoor use, w/ 1 mil
Tedlar laminate for
increased weather
resistance
6.1.6.1 Support of Compliant: Bolted Compliant: Bolted Compliant: Bolted Design requirement, no
devices remotely Connections Connections Connections test specified
connected to meters
6.1.7.1 Auxiliary 221-020001 (American): All models: < 0.17 ozf in All models: < 0.25 ozf in B109.1/2 6.1.7.1
Device Driving < 0.18 ozf in Auxiliary Device Driving
Torque Torque. Manufacturers
222-030001 (Rockwell): shall publish maximum
< 0.11 ozf in torques for all devices.

222-040001 (Rockwell
415): < 0.30 ozf in

6.3.2.1 Physical Exhibit 5: Gas IMU Exhibit 5: Gas IMU Exhibit 5: Gas IMU Wear testing per 3.3.3.
compatibility to Compatibility by Meter Compatibility by Meter Compatibility by Meter
different meters, and
not cause undue
wear or shorten
meter life
6.3.2.2/6.10.2.2/6.10 Exhibit 3A: Residential Exhibit 3A: Residential Exhibit 3B: Commercial
.2.2 Remote meter Meter Accuracy Results Meter Accuracy Results Meter Accuracy Results
reading accuracy
6.3.3 Add to Section NA; IMU is not an NA; IMU is not an NA; IMU is not an 6.3.3 specifies
6.1.4 requirements encoding index encoding index encoding index identification of unit of
(Aux Device measurement (e.g.,
Identification) cubic fee x 100); the
IMU is not an encoding
index and uses the
existing meter index
display showing unit of
measurement.

Rev: 11/01/16 Page 3 of 5


Residential
Residential Actaris/Sprague/Nat/La
American/Rockwell ncaster Commercial
B109 Specification IMU300 IMU300A IMU200 Applicability Notes
6.3.4 Remote Index NA: IMU is not a remote NA: IMU is not a remote NA: IMU is not a remote 6.3.4 specifies
Specification Index Index Index customer identification
for remote index; the
IMU is not a remote
index therefore this
section does not apply.

Additional B109 & C12.1 Tests


These additional B109 tests were also performed as well as related C12.1 testing.

Residential
Residential Actaris/Sprague/Nat/L
American/Rockwell ancaster Commercial
B109 Specification IMU300 IMU300A IMU200 Applicability Notes
2.9.2/2.14.2 Salt Spray Exhibit 1B: ESL32999- Exhibit 1B: ESL32999- Exhibit 2: ESL28001-
Test: 1000 hour Testing GENRev1: MET Labs GENRev1: MET Labs GEN: MET Labs
per ASTM 117 Report, Environmental Report, Environmental Report,
Environmental
Testing, SSN Residential Testing, SSN Residential
Testing, SSN
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1 Commercial Gas
and ANSI C12.1 and ANSI C12.1 IMU, ANSI B109.3
and ANSI C12.1
2.12.2/2.15.2 Exhibit 1B: ESL32999- Exhibit 1B: ESL32999- Exhibit 2: ESL28001-
Temperature Shock GENRev1: MET Labs GENRev1: MET Labs GEN: MET Labs
Resistance Report, Environmental Report, Environmental Report,
Environmental
Testing, SSN Residential Testing, SSN Residential
Testing, SSN
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1 Commercial Gas
and ANSI C12.1 and ANSI C12.1 IMU, ANSI B109.3
and ANSI C12.1
ANSI C12.1, Section Exhibit 1B: ESL32999- Exhibit 1B: ESL32999- Exhibit 2: ESL28001-
4.7.3.16 TEST No. 30: GENRev1: MET Labs GENRev1: MET Labs GEN: MET Labs
EFFECT OF OPERATION Report, Environmental Report, Environmental Report,
TEMPERATURE Environmental
Testing, SSN Residential Testing, SSN Residential
Testing, SSN
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1 Commercial Gas
and ANSI C12.1 and ANSI C12.1 IMU, ANSI B109.3
and ANSI C12.1
ANSI C12.1, Section Exhibit 1B: ESL32999- Exhibit 1B: ESL32999- Exhibit 2: ESL28001-
4.7.3.17 TEST No. 31: GENRev1: MET Labs GENRev1: MET Labs GEN: MET Labs
EFFECT OF RELATIVE Report, Environmental Report, Environmental Report,
HUMIDITY Environmental
Testing, SSN Residential Testing, SSN Residential
Testing, SSN
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1 Commercial Gas
and ANSI C12.1 and ANSI C12.1 IMU, ANSI B109.3
and ANSI C12.1

Rev: 11/01/16 Page 4 of 5


Residential
Residential Actaris/Sprague/Nat/L
American/Rockwell ancaster Commercial
B109 Specification IMU300 IMU300A IMU200 Applicability Notes
ANSI C12.1, Section Exhibit 1A: ESL26505- Exhibit 1A: ESL26505- NA
4.7.3.18 TEST No. 32: GENRev1: MET Labs GENRev1: MET Labs
MECHANICAL SHOCK Report, Environmental Report, Environmental
Testing, SSN Residential Testing, SSN Residential
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1
and ANSI C12.1 and ANSI C12.1

ANSI C12.1, Section Exhibit 1A: ESL26505- Exhibit 1A: ESL26505- NA


4.7.3.20 TEST No. 34 GENRev1: MET Labs GENRev1: MET Labs
MECHANICAL VIBRATION Report, Environmental Report, Environmental
Testing, SSN Residential Testing, SSN Residential
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1
and ANSI C12.1 and ANSI C12.1

ANSI C12.1, Section Exhibit 1B: ESL32999- Exhibit 1B: ESL32999- Exhibit 2: ESL28001- Note: ANSI C12.1 test#36
4.7.3.22 TEST No. 36: GENRev1: MET Labs GENRev1: MET Labs GEN: MET Labs is equivalent to ANSI
WEATHER SIMULATION Report, Environmental Report, Environmental Report, B109.1 2.9.1
TEST Environmental
Testing, SSN Residential Testing, SSN Residential
Testing, SSN
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1 Commercial Gas
and ANSI C12.1 and ANSI C12.1 IMU, ANSI B109.3
and ANSI C12.1
ANSI C12.1, Section Exhibit 1A: ESL26505- Exhibit 1A: ESL26505- NA
4.7.3.24 TEST No. 38 GENRev1: MET Labs GENRev1: MET Labs
RAIN-TIGHTNESS Report, Environmental Report, Environmental
Testing, SSN Residential Testing, SSN Residential
Gas IMU, ANSI B109.1 Gas IMU, ANSI B109.1
and ANSI C12.1 and ANSI C12.1

Rev: 11/01/16 Page 5 of 5

You might also like