Professional Documents
Culture Documents
Catalog
Catalog
Modern industrial societies need efficient and reliable traffic infrastructures. That is true both for road and rail. High speed
modes of transport require routes with the gentlest curves and inclined sections with small upward and downward gradients.
The topographical conditions in most countries require tunnels and bridges when planning the route, and these are very
expensive engineering structures.
Tunnel construction requires a large amount of geological investigation and static calculation of the tunnel cross section. Issues
such as safety, fire protection, corrosion protection, technical equipment and the durability of the constructions require a
substantial amount of planning which usually drags on for years. Owing to the efficiency of the tools, machines and high
strength concretes which are available today, tunnels can now be built in much shorter times than was previously possible a
few decades ago.
The safety equipment, such as signalling devices, lighting, ventilation systems, retrieval anchors and emergency exits contribu
te substantially to safety in tunnels.
Parts from the HALFEN DEHA product range are used in different areas of tunnel construction for adjustable and costeffective
mountings and reinforcement technology.
The regulations listed below contain definitive references for the range of the mounting designs:
ZTVING (Additional technical contract conditions and guidelines for civil engineering works. Edition March 2003, Part 5.1 and
5.2 (Road tunnels by closed or open cut method)
• Mountings for tunnel installations must be made from stainless steel with material numbers 1.4529 or 1.4547 and
Resistance class IV according to German Industrial Standard DIN EN ISO 3506 and according to DIN EN 10088.
Official approval certificate No. Z30.36 of “Products, connecting devices and structural components made from stainless
steel”
• Table 1: Classification of grades of steel according to strength classes and corrosion resistance classes as well as
typical applications for structural components and connecting devices.
Swiss standard SIA 179 (Swiss association of architects and engineers, Edition 1998, Recommendations for mountings in
concrete and masonry)
• Section 4,14. Mounting elements made from stainless steel or special materials
• Table 10: Corrosion resistance class IV, Material No. 1.4529, 1.4547
• Table 11: stainless steel Group IV: Well suited for use in tunnels.
2
PRODUCTS IN APPLICATION: TUNNEL CONSTRUCTION
Contents
Application Page
Contact 11
Adress 12
3
HALFEN CAST-IN CHANNELS FOR THE TUNNEL CONSTRUCTION
Available in lengths from 0,15 m to 6,07 m
50 HTA 50/30 10 kN gv gv gv gv
fv fv fv fv
30
® see catalogue MT A4 A4 A4
22 HM 50/30
49 gv gv gv gv
HTA 49/30 10 kN
fv fv fv fv
A4 A4 A4
30
40 HTA 40/22 6 kN gv gv gv
fv fv
22
18 HM 40/22 ® see catalogue MT A4 A4 A4
40 HTA 40/25 6 kN gv gv gv
fv fv
25
A4 A4 A4
18 HM 40/25 ® see catalogue MT
gv gv gv
38 HTA 38/17 4,5 kN
fv fv fv
17 A4 A4 A4
18 HM 38/17 ® see catalogue MT HCR HCR HCR
HTA 28/15 3 kN gv gv gv gv
28
fv
15 HM 28/15 ® see catalogue MT A4 A4
12 HCR HCR
HL 28/15 ® see catalogue MT
41 HM 41/41 ® see catalogue MT
fv fv
41 H L 41/41 ® see catalogue MT A4 A4
22 HZL 41/41 ® see catalogue MT
36
HM 36/36 ® see catalogue MT gv gv gv
fv fv fv
36
HL 36/36 A4 A4 A4
® see catalogue MT
18
27
HM 28/28 ® see catalogue MT gv gv gv gv
28 fv
A4 A4
12
HL 28/28 ® see catalogue MT
4
ROAD TUNNELS
Mounting lighting systems
5
ROAD TUNNELS
Reinforcement connections
HBS05A
6
ROAD TUNNELS
Retrieval anchors
The anchors must not project into the tunnel space. They are The chain secures the anchor from Spherical head
stowed in niches. being stolen. anchor with
shackle.
Further detailed information is included in the technical information for Spherical Head Transport Anchors.
Please download catalogue KKT at www.halfendeha.com.
7
RAILWAY TUNNELS
Mounting contact wires, wheel tensioners, return lines and line feeders
Curved Halfen channels are connected to the reinforcement. The contact wire bracket is bolted to
The jumbo presses itself against the Halfen channels, so that the channels later lie the Halfen channel so that it can be
flush with the surface of the concrete. adjusted.
8
RAILWAY TUNNELS
Mounting contact wires, wheel tensioners, return lines and line feeders
9
ROAD TUNNEL
PIPE SUPPORT FOR VENTILATION DUCTS
Toothed connection
10
PRODUCTS IN APPLICATION: TUNNEL CONSTRUCTION
Reference projects in Germany and worldwide
Italy HALFEN - OROBIA s.r.l. Phone: +39 – 035 - 89 38 11 Fax: +39 – 035 - 89 30 71
Malaysia HALFEN-DEHA Sdn. Bhd. Phone: +603 – 6250 9630 Fax: +603 – 6250 9650
Lot E/23117, Jalan 5/32A · ff Batu 6 ½, Jalan Kepong E-Mail: info@halfen-deha.com.my
United Arab Emirates Salam Enterprises L.L.C. Phone: +971 – 4 – 28 96 289 Fax: +971 – 4 – 28 96 089
PO Box 28326 E-Mail: mail@salamenterprisesllc.com
Dubai Internet: www.salamenterprisesllc.com
11/04
0.00011/04
United Kingdom / HALFEN Ltd. Phone: +44 – 8705 – 31 63 00 Fax: +44 – 8705 – 31 63 04
Ireland 31 Humphrys Road · Woodside Estate E-Mail: info@halfen.co.uk
5.000
For futher adresses HALFEN-DEHA Vertriebsgesellschaft mbH Phone: +49 - 2173 - 970 840 Fax: +49 - 2173 - 970 425
please contact: Liebigstr. 14 E-Mail: info@halfen-deha.com
NE- -012
The HALFEN-DEHA Quality Management System is certified for the locations in Germany, Switzerland and
Poznan/Poland according to DIN EN ISO 9001/2000, Certificate No. QS-281 HH.