Professional Documents
Culture Documents
Shenkai Detail of Sensors Cms
Shenkai Detail of Sensors Cms
, LTD
No.1769 Puxing Road, Minhang Distract, Shanghai China P.C.: 201114,
Fax: 86-021-54320373 Tel: 86-021-64293625
Website: www.shenkai.comEmail: kaleem@shenkai.com
DETAIL OF SENSORS
Overview:
This sensor is installed on the draw works shaft and
it can monitor the angular displacement generated
by the rotation of draw works shaft in the whole drilling operation. Changes in hook
height during drilling can be obtained through calculation, thus the current drilling
depth can be obtained.
The detector switch and a ferruginous blade are installed inside the explosion-proof
draw works sensor. When rotating with the draw works shaft, the blade will pass
through the sampling channel of two detector switches with phase difference of 90° to
send out two groups of corresponding electric pulse signals. The corresponding
direction of angular displacement and changing value can be obtained after the signals
are sent into the instrument for identifying and processing. Changes in hook height
during drilling can be obtained through calculation, thus the current drilling depth can
be obtained.
Technical Specifications:
Measuring range: 0-9999 (hook position)
Block position measuring range:0-50m
Working voltage: 9V(DC)
Output signal:1~3mA, NAMUR signal
Working temperature:(-40~+85) oC can work in(-40~+100)oC
Highest speed: 1250rpm
Coding plate tooth: 12
Accuracy: 10mm/single
Overview:
Standpipe pressure sensor can be used to
measure the pressure of viscous media. Because
the sensitive elements of the sensor adopt hard membrane structure, it has the
functions of impact resistance and abrasion resistance when contacting with the
measured medium directly. In addition, adopting ion beam deposition technique
makes the sensor have features of high precision and working stably in harsh
environment for a long time
Technical Specifications:
Measuring range:0~40Mpa
Measuring mode: contact mud by non-cavity metal film measuring
Output signal: 4~20mA
Input voltage: 24VDC ± 4V
Working temperature: (-40~80) oC
Overview:
Standpipe & casing pressure sensor can be used to
measure the pressure of viscous media. Because
the sensitive elements of the sensor adopt hard
membrane structure, it has the functions of impact
resistance and abrasion resistance when contacting with the measured medium
directly. In addition, adopting ion beam deposition technique makes the sensor have
features of high precision and working stably in harsh environment for a long time
Technical Specifications:
Measuring range: 30, 60, 120, 240, 480, 960, 1920 times/min optional
Working temperature: (-40~85) oC
Rated working voltage:24VDC
Output current: 1~3mA NAMUR signal
Efficient motion distance: ≤16.2mm
Max working frequency: 100Hz
Accuracy: 1% (F.S)
adopting industrial grade elements and seal structure, it can work in the open air all
day long.
Technical Specifications:
Measuring range: 30, 60, 120, 240, 480, 960, 1920 times/min optional
Working temperature: (-40~85) oC
Input voltage: 24 ± 4VDC
Output signal: 4~20 mA
Aperture: Φ40mm
Accuracy: 1% (F.S)
Overview:
This sensor is a current sensor composed of hall element, which outputs signals by
adopting three-wire single power supply (24VDC). Since adopting industrial grade
elements and seal structure, it can work in the open air all day long.
Technical Specifications:
Measuring range: 0-1.6Mpa (0-50KN.m)
Measuring range : 0~100kN.m
Working temperature: (-40~85) oC
Input voltage: 15~24VDC
Output signal: 4~20mA
Accuracy: 2% (F.S)
Overview:
This sensor is used to measure the relative variation of outlet flow rate of mud.
According to the continuity principle and Bernoulli equation of mud and the force
analysis of baffle, the functional relation between the flow rate and the amplitude of
fluctuation of sensor baffle can be obtained. This sensor can linearly reflect the
angular displacement of baffle with the resistance variation of resistor, thus measuring
the relative variation of mud flow rate. Current transmitting unit is added to the flow
sensor of current type, which will convert the output into current. It has passed
explosion-proof certification.
Technical Specifications:
Measuring range: 0-100% (relative flow)
Working temperature (-40~80) oC
Input voltage: 15~24VDC
Output signal: 4~20mA
Accuracy: 5% (F.S)
Overview:
Hood load sensor (measuring range: 0-6MPa) alloy film
sensor is composed of ion beam sputtering alloy film
pressure sensor and signal modulation circuit, applicable to
detect fluid pressure, pressure difference and liquid level. It is made by adopting
modern film device and etching technology. It has features of unique technology,
superior performance, high precision and working stably in harsh environment for a
long time.
The pressure/differential pressure of liquid medium can act on corrosion resistant
stainless elastic membrane, thus making it deformed. Fabricate alloy firm strain
resistances forming Wheatstone bridge on the membrane. The physical dimension and
numerical value of resistance will change with the deformation of resistance and the
electrical bridge will output corresponding signals. Electronic circuit will amplify the
signal outputted by the electric bridge and convert it into current signal of 4-20mA for
output.
H.S.E Compliance: Explosion-proof
Technical Specifications:
Measuring range: 0~4000kN
H2S Sensor:
H.S.E Compliance: Explosion-proof detects dangerous H2S gas and ensures life
safety.
Technical Specifications:
Measuring range : 0~100ppm
Working temperature: (-40~75) oC
Input voltage: 15~24VDC
Output signal: 4~20mA
Overview:
It is a kind of ultrasonic liquid level sensor combining the
sensing technique and electrical signals together. It is used to
measure the liquid level in the open or sealed container.
The sensor is equipped with ultrasonic sensor and temperature
sensing elements. The sensor can emit a series of ultrasonic
pulse by the probe; the ultrasonic pulse will return and be
received by the sensor after encountering liquid level. The filter
in the sensor can distinguish the true echo returned from the liquid level between
various kinds of false echoes from noise of acoustic wave and electric wave and noise
of rotation of agitator paddles. After being compensated, the time spent from the
impulse wave is emitting to the liquid level until it returns to the sensor will be
converted into displayable distance and current for output.
H.S.E Compliance: Explosion-proof, any kind of gain or loss in mud level indicates
the subsurface threats for drilling operation.
Technical Specifications:
Measuring range:0-2m(or specified according to user’s requirements)
Input voltage: 12 V~24VDC
Output signal: 4~20mA
Working temperature: (-40~60) oC
Accuracy: 1.5% (F.S)
Overview:
This sensor is used for measuring the density of drilling fluid of
petroleum drilling and it can also be used to measure the flow rate of
liquid, gas, steam and liquid level.
H.S.E Compliance: Explosion-proof
Technical Specifications:
Measuring range: 0-3g/cm 3
Working temperature: (-40~80) oC
Input voltage: 15~24VDC
Output signal: 4~20mA
Overview:
SHENKAI-8W01/02 and SHENKAI-8W01A/02A temperature sensors
are resistance bulbs made of platinum tinsel, and can be used to measure
the temperature of mud. They are equipped with anti-collided metal
housing bracket and characterized by high accuracy, high resolution,
safety and reliability, and convenience to use, etc. They can also directly
measure the temperature of liquid, steam and gas medium in various
production process. This sensor can measure temperature by using the
characteristics that the resistance of metal will change with the variation
of temperature. Its heating element is the slim platinum tinsel that is
wrapped doubly on the SHENKAI eleton made of insulating material
uniformly
Technical Specifications:
Measuring range: (0~100)oC
Input voltage: 15~24VDC
Output signal: 4~20mA
Accuracy: 1 F.S
Conductivity Sensor:
Overview:
SHENKAI-8 D 08 digital type electrical conductivity sensors is mainly
used to measure the electrical conductivity of mud.
This sensor is characterized by being capable of reading electrical
conductivity values from the display screen directly and having 4-20mA
analog signal output of 0-300ms/cm. It is convenient for carrying out
calibrating operation.
This product can be used together with SHENKAI series CAN bus
instrument and explosion-proof mud logging unit. And it can also be used
independently.
Technical Specifications: