Matchwell Engineering conducted a welding PPE audit, checking 10 points to ensure worker safety. The audit checked that the work area was clean and clear of hazards, gloves and welding equipment were in good condition, the welder's mask and eye protection met specifications, and that safety shoes, gloves, aprons and sleeves were available and worn by welders. The audit was prepared by one individual and checked by another, with the results approved by a manager.
Matchwell Engineering conducted a welding PPE audit, checking 10 points to ensure worker safety. The audit checked that the work area was clean and clear of hazards, gloves and welding equipment were in good condition, the welder's mask and eye protection met specifications, and that safety shoes, gloves, aprons and sleeves were available and worn by welders. The audit was prepared by one individual and checked by another, with the results approved by a manager.
Matchwell Engineering conducted a welding PPE audit, checking 10 points to ensure worker safety. The audit checked that the work area was clean and clear of hazards, gloves and welding equipment were in good condition, the welder's mask and eye protection met specifications, and that safety shoes, gloves, aprons and sleeves were available and worn by welders. The audit was prepared by one individual and checked by another, with the results approved by a manager.
Matchwell Engineering Private Limited ISO 3834-2:2005
WELDING PPE AUDIT CHECK SHEET. Doc No.:
AuditNo Audit Date Auditee Auditor Sr. No Check Point Ok/ Not Ok Action Plan Target Date 1 Is the work area is clean and clear of grease, oil and any other flammable materials. 2 Is the gloves, welding gun and work leads are in good condition ? 3 Is The Welder mask as per specification ( V-410-v) 4 Is the Eye Protective glass as per std ( 11A1) 5 Is Safety Shooes & Hand Gloves avaliable with welder ? 6 Is Apron and Sleeve wear by welder during welder ? 7 8 9 10 Prepared By: Charudatta Avalaskar Checked By: Surykant Tiwari Approved By: Ranjit Patil Revision No: 01 Revision Date: Page Number: 1 of 1