This document shows how to configure a recursive static route on router R1 to route traffic for the 192.168.1.0, 10.1.1.0, 209.165.200.224, and 198.133.219.0 networks to the next hop router at 10.1.1.2. The static routes are added using the ip route command, specifying the network, mask, and next hop router to send the traffic to for each route.
This document shows how to configure a recursive static route on router R1 to route traffic for the 192.168.1.0, 10.1.1.0, 209.165.200.224, and 198.133.219.0 networks to the next hop router at 10.1.1.2. The static routes are added using the ip route command, specifying the network, mask, and next hop router to send the traffic to for each route.
This document shows how to configure a recursive static route on router R1 to route traffic for the 192.168.1.0, 10.1.1.0, 209.165.200.224, and 198.133.219.0 networks to the next hop router at 10.1.1.2. The static routes are added using the ip route command, specifying the network, mask, and next hop router to send the traffic to for each route.