Professional Documents
Culture Documents
Department of Applied Mechanics A-3: AML 151 Engineering Mechanics (Section R)
Department of Applied Mechanics A-3: AML 151 Engineering Mechanics (Section R)
Department of Applied Mechanics A-3: AML 151 Engineering Mechanics (Section R)
Date of 24-08-2019
Hard copy 26-08-2019
submission before
submission in Class
online 9:00 PM
7. Two Parallel 40-N forces are applied to a lever as shown in fig.2. Determine the moment formed by
the two forces about point A.
Figure. 1 Figure. 2
8. The Tension in the cable attached to the end C of an adjustable boom ABC shown in fig.3 is 2.24 kN
Replace the force exerted by the cable at C with an equivalent force-couple system (a) at A, (b) at B.
9. A dirigible is tethered by a cable attached to its cabin at B as shown in fig.4. If the tension in the cable
is 1040 N, replace the force exerted by the cable at B with an equivalent system formed by two parallel
forces applied at A and C.
Figure. 3 Figure. 4
10. A worker tries to move a rock by applying a 360 N force to a steel bar as shown in fig.5. If two workers
attempt to move the same rock by applying a force at A and a parallel force at C, determine these two
forces so that they will be equivalent to the single 360 N force shown in the figure.
Figure. 5