Professional Documents
Culture Documents
Cleaner Production Practices in The Dairy Processing Facility of The Philippine Carabao Center
Cleaner Production Practices in The Dairy Processing Facility of The Philippine Carabao Center
August 2015
ABSTRACT
The main objective of this study was to assess the cleaner production practices in the
dairy processing of the Philippine Carabao Center (PCC) National Headquarters and Gene Pool
at the Science City of Muñoz, Nueva Ecija.
The study entailed identification and description of production input and processing
practices and the consequent output including product yield and waste generation on water,
hazardous chemicals, cleaning chemicals, air emission, and packaging material as indicators of
cleaner production practices.
It has been found out that ice cream products have been generating the most volume of
wastewater and low fat milk product comes second. On the other hand, kesong puti products
have been generating the most effluents owing to uncollected whey followed by low fat milk and
chocolate milk products. Producing mostly liquid milk products, high-density polyethylene
bottles were the most utilized packaging material followed by polystyrene ice cream containers
and the least was pastillas and kesong puti packaging. While great volume of packaging
materials were spent for liquid milk products and ice cream, its packaging materials are mostly
recyclable while pastillas packaging material, the most elaborated packaging, is the least
recyclable.
One of the significant findings of the study was the establishment of benchmarks in
wastewater and effluents generation expressed in volumetric coefficients or unit volume per
kilogram raw milk processed. Volumetric coefficients, when compared to volumetric coefficients
in the dairy industry in various studies, provided the degree or extent of wastage and show how
far the current condition from what is achievable. This provided basis of assessment on current
extent of cleaner production practices of the PCC dairy processing facility and identified options
in promoting cleaner production.
2
Having identified the potential areas and steps in the milk processing to reduce wastage
and improve production, the study has identified strategies and methods towards promoting
cleaner production including building the capacity of the dairy processing plant personnel,
development of skills and commitment, strengthening system for safeguarding the integrity of
processing standards, implementing preventive maintenance of machines and equipment, and
improving the working condition of plant personnel.
INTRODUCTION
Milk supply in the country had been increasing. The Philippines’ Dairy Road Map 2010-
2016, a Medium-Term Dairy Development Plan formulated by the National Dairy Authority,
recognizes the country as the emerging dairy nation and provides the framework for local
producers to increase their market share of liquid milk from 20 per cent to 40 percent and to
double national milk output from 11 million liters to 24 million liters. But milk imports are not
likely to decrease with increasing demand as a result of the country’s fast population growth.
Consequently, dairy plant operations as well as its numbers would expand. Undesirably,
increasing dairy industry pose environmental problems considering that dairy sector is indicated
as one of the important contributors of greenhouse gases (GHG) as cited in the 2010 World
Resources Review. Thus, it is of particular importance for cleaner production to be promoted and
practiced in the dairy sector.
The concept and strategies of cleaner production have been evolving since it was coined
in 1989. Many definitions went out since then and one common feature can be found – cleaner
production is a preventive upstream approach rather than a curative downstream approach. The
main focus is on the prevention and reduction of waste and inefficient use of energy and
resources (Shi, Li, & Wen, 2011).
The Administrative Order (AO) 153 series of 2004 of the Department of Health (DOH)
Food and Drug Administration (FDA), known as the revised Current Good Manufacturing
3
The current government programs need a boost in the promotion of cleaner production in
the midst of threat posed by the GHG emission of the dairy sector. Providing methods and
approaches on cleaner production assessment in dairy processing is one important support to the
government that this study hopes to contribute.
METHODOLOGY
The cleaner production study of the PCC’s dairy processing facility assessed the
production processes of dairy products commonly produced including: 1) pasteurized milk, 2)
chocolate milk, 3) low fat milk, 4) kesong puti, 5) ice cream (plain or without the flavoring), and
6) pastillas (plain or without the flavoring).
The cleaner production practices study parameters focused on the following important
indicators of cleaner production, e.g., water consumption, hazardous chemicals usage, solid
waste generation from packaging materials, effluents from cleaning chemicals and whey drain,
air emission from burning liquefied petroleum gas (LPG), product yield, and production
efficiency.
RESULTS
Milk Receiving
An average of 2,055 liters of wastewater were generated daily at milk receiving with
computed volumetric coefficient (VC) of 1.84 L/Kg raw milk (Table 1). This was twice the
0.11–0.92 L/Kg raw milk as cited in the study of COWI Consulting Engineers and Planners AS
(2000). In another related study by Brião and Tavares (2007), a volumetric coefficient of 0.086
L/Kg raw milk was achieved in milk reception.Further, the benchmarked volumetric coefficient
(VC) for cleaning chemicals was 1.06 ml/Kg raw milk.
Table 1. Summary of wastewater and daily cleaning chemicals utilization in milk receiving
Hazardous chemicals were used in testing the quality of milk before receiving including
ethyl alcohol (60%) and sodium hydroxide (0.1 N NaOH). These chemicals are included in the
Occupational Safety and Health Administration (OSHA) of the United States Department of
Labor list of hazardous chemicals.The volume of chemicals used in receiving farmers’ milk was
more than three times than that of PCC Gene Pool’s (Table 2).The benchmarked volumetric
coefficients of utilized hazardous chemicals were 0.070 ml/Kg raw milk and 0.012 ml/Kg raw
milk for 60% ethyl alcohol and NaOH, 0.1 N, respectively.
5
Observations on practices in milk receiving have shown that mishandling transfer of milk
resulted to raw milk spillage. Spillage was drainedthrough the central drainage system traversing
the dairy processing facility. This exposes the dairy products to possible cross-contamination.
With dairy processing personnelworking simultaneously with raw milk and dairy products, there
is heightened possibility of cross-contamination. Washing and sanitizingmilk cans from Gene
Pool’s milk deliveries consume great volume of water of 626 liters and with its effluents passing
the central drainage, it further expose dairy products to probable recontamination.
Unsupervisedand unmonitored use of cleaning chemicals resulted to estimation rather than
measured; hence, concentration accuracy is uncertain.Malfunctioning ice bank thermostat
seriously affect the cooling of raw milk received with higher possibility of spoilage.
Transferring milk from milk receiving to pasteurizing equipment requires pumping. Prior
to transferring, pipelines are sanitized and rinsed with water. As such, pipelines are full with
water at the start of receiving milk. As a result, pumping milk from receiving to pasteurizer
undergo transition from water to milk at the start of processing, transferring milk product to
storage prior to packaging and finally from milk to hot water circulation for post-Clean In Place
(CIP). This transition results to effluent, which is rather necessary to avoid dilution of product
with water.
the achieved VC value of 0.416 to 1.0 L/Kg raw milk in liquid milk processing as cited in the
study (Brião & Tavares, 2007).A VC value of 0.1 to 5.2 were also documented in another study
with VC of 0.1 to 0.4 indicating excellent management, 1.0 as good, and 5.2 indicating poor
management level (Verheijen, Wiersema, & Hulshoff Pol, 1996).
The benchmarked VC value for cleaning chemicals was 2.32 ml/Kg raw milk.
Table 3. Summary of wastewater and cleaning chemical effluents in pasteurized milk processing
The VC value for packaging materials were 48.84 gm/Kg raw milk for 1-L HDPE bottle,
76.93 for 500-ml,and 103.84 for 250-ml HDPE bottle (Table 4). Increasing VC value was noted
in smaller bottles.Recyclability of bottles were 95% for 1-L and 500-ml HDPE bottles while
96% for 250-ml HDPE bottle.
7
Table 4. Summary of volumetric coefficients (VC) of pasteurized milk product packaging and
labeling materials, and recyclability
RECYCLABLE
1-L HDPE 500-ML HDPE 250-ML HDPE
PACKAGING MATERIAL BOTTLE BOTTLE BOTTLE
AND LABEL
VC (gm/Kgraw VC (gm/Kg VC (gm/Kg
milk) raw milk) raw milk)
Bottle 42.92 65.78 84.95 Yes
Cap 3.69 7.38 14.75 Yes
Label 1.28 2.35 2.53 No
Waste sticker holder 0.95 1.42 1.61 No
Total 48.84 76.93 103.84
Total Recyclable 46.61 73.16 99.70
Total Non-Recyclable 2.23 3.77 4.14
Total Recyclable, % 95% 95% 96%
Total Non-Recyclable, % 5% 5% 4%
Production yield ranged from 97.60% to 99.74%, averaging 98.60% (Table 5). The
product yield exceeded the expected such that production efficiencies went beyond 100%
ranging from 102.74% to 104.99%, averaging 103.79%. The reason behind this, reportedly,was
that more raw milk was actually processed more than what were recorded. There was lack of
control in supplying raw milk input relying only on dip stick in measuring the raw milk
withdrawn from raw milk cooling tanks.Another possibility, as reported, is the product dilution
with water in the process of transition or the product changed-over procedure.
Table 5. Volume of raw milk input, product output, product yield, and production efficiency in
pasteurized milk processing
Observations in the pasteurized milk processing show that the flowrate was almost half
the rate capacity of the pasteurizer; hence the longer processing time. The longer processing time
consume more energy and larger volume of cooling water discharge from homogenizer.
8
The operator was not supervised nor monitored during the entire operations. Like in milk
receiving, use of cleaning chemicals for cleaning and sanitizing were neither supervised nor
monitored such that there is uncertainty in the required concentration for an effective cleaning
and sanitizing resulting to wastage.
The malfunctioning thermostat of the ice bank greatly affects the performance of this
machine that might affect the product in terms of reduced shelf life.
An average of 630 liters of wastewater were generated daily in low fat milk processing
and additional 15 liters from cooling water (Table 6). The wastewater VC value of low fat milk
was 6.60 L/Kg raw milk (including cooling water and wastewater from transition effluent). This
is six to sixteen times higher than the VC value documented in the study at 0.416 to 1.0 L/Kg
raw milk (Brião & Tavares, 2007).The benchmarked VC value for cleaning chemicals was 1.97
ml/Kg raw milk.
Table 6. Summary of daily wastewater and cleaning chemical effluent from low fat milk
production
The VC values of packaging materials were 42.82 gm/Kg raw milkfor 1-L HDPE bottle,
67.44 for 500-ml HDPE bottle, and 91.03 for 250-ml HDPE bottle (Table 7). Recyclability of
bottles were 95% for 1-L and 500-ml HDPE bottles while 96% for 250-ml HDPE bottle.
9
Table 7. Summary of volumetric coefficients (VC) of low fat milk product packaging and
labeling materials, and recyclability
RECYCLABILE
1-L HDPE 500-ML HDPE 250-ML HDPE
PACKAGING MATERIAL BOTTLE BOTTLE BOTTLE
AND LABEL
VC (gm/Kg VC (gm/Kg VC (gm/Kg
raw milk) raw milk) raw milk)
Bottle 37.63 57.67 74.47 Yes
Cap 3.23 6.47 12.93 Yes
Label 1.12 2.06 2.22 No
Sticker holder 0.84 1.24 1.41 No
Total 42.82 67.44 91.03
Total Recyclable 40.86 64.14 87.40
Total Non-Recyclable 1.96 3.30 3.63
Total Recyclable, % 95% 95% 96%
Total Non-Recyclable, % 5% 5% 4%
Product yield ranged from 81.84% to 89.72% averaging 86.44% while the production
efficiency ranged from 92.99% to 101.96% averaging to 98.22%.
Observations show that cream separation flowrates vary widely from 109 Kg/h to 545
Kg/h with the manual feeding of machine. Manual feeding also generated milk spillage and
expose milk to probable recontamination. There was unsolved product recontamination after
cream separation such that the low fat milk product was re-pasteurized in continuous pasteurizer-
homogenizer.This option, though, generated more wastewater and product loss in the transition
effluents, not to mention the additional energy and manpower consumption.The lowest observed
production efficiency of 92.99%was mainly due to product spillage in the process of manual
feeding the cream separator and bottle filling.Production efficiency of 101.96% in spite of
spillage and product loss in re-pasteurization could be attributed to product dilution during
product change-over in the continuous pasteurizer-homogenizer.
Bottle filling rates also ranged widely from 356 to 485 bottles per hour indicating
inefficiencies in operation. Pasteurization does not destroy all of the micro-organisms; hence, the
milk has to be cooled rapidly to prevent the growth of surviving bacteria. But the longer the
bottling time the higher the possibility of microbial regrowth with the increased filling
temperature shortening its shelf life. Hence, it is important to improve the bottling rate.
10
Chocolate Milk
The average daily volume of wastewater from pre- and post- Clean Out of Place (COP)
of pre-mixing and mixing tanks and in washing sanitizing production area was 410 liters.
Transition effluents were 28 liters composed of 3 liters product and 25 liters wastewater (Table
5). Cleaning chemicals utilized were 140.00 ml detergent and 240.00 ml sanitizer (Table 7).
The wastewater VC value of 2.07 L/Kg raw milk (including wastewater from cooling
water and transition effluent) for chocolate milk was two to five times higher than the VC
achievable for liquid milk products at 0.416 to 1.0 L/Kg raw milk as cited by Brião and Tavares
(2007). In another study, VC value of 2.0 indicated poor management level (Appendix H)
(Verheijen, Wiersema, & Hulshoff Pol, 1996). Water consumption can be reduced if cleaning
and sanitizing of pre-mixing and mixing tanks were done through CIP procedure. The pre-
mixing and mixing tanks for mixing ingredients of chocolate milk product are equipped with CIP
system. In spite of this, the operator and production aide prefer the COP procedure. According to
one study, cleaning by means of the CIP system reduces water consumption and volumetric
coefficient (Brião & Tavares, 2007).
The benchmarked VC value for cleaning chemicals was 1.52 ml/Kg raw milk.
The packaging and labeling materials were composed of HDPE bottles and caps and
laminated papers for the sticker label. HDPE material is recyclable while laminated papers are
not. The summary of volumetric coefficients (VC) of chocolate milk product packaging and
labeling materials, and its recyclability is presented in Table 8.In terms of recyclability of
11
packaging materials, both 1-L and 500-ml HDPE bottle packaging are 95% recyclable. The 250-
ml is 96% recyclable. The volume of packaging materials increase with the decrease in
packaging unit at 39.38 gm/Kg raw milkfor 1-liter HDPE bottle to 83.73 gm/Kg raw milk for
250-ml HDPE bottle.
Table 9. Summary of volumetric coefficients (VC) of chocolate milk product packaging and
labeling materials, and recyclability
RECYCLABILITY
1-L HDPE 500-ML HDPE 250-ML HDPE
PACKAGING MATERIAL BOTTLE BOTTLE BOTTLE
AND LABEL
The average product outputs in the three production runs observedranged from 482 to
514 Kg averaging 497 Kg. Product yield ranged from 77% to 82% averaging 79% falling below
the expected product yield of 90.8%. Consequently, the average production efficiency was
lowest at 84.93% and highest at 90.57%, averaging 87.58%(Table 9).
Table 10. Volume of raw milk input, product output, production efficiency, and bottling rate in
chocolate milk processing
Bottle filling rates ranged widely from 533 to 582 bottles per hour indicating
inefficiencies in operation mainly affected by the availability of production aide manning the
filling section. Recontamination is more probable with longer bottling time due to an increased
filling temperature of product. The highest product temperature after bottling was 19.1°C almost
reaching the 20°C which is the critical product temperature in bottling. This was aggravated with
the malfunctioning ice bank thermostat where product cooling was seriously affected. Reaching
the critical temperature of 20 °C would affect the product in terms of reduced shelf life.
Kesong Puti
Whey was drained for two hours. The average volume of whey in a day’s production was
72.94 liters (Table 11). An average of 54.29 liters or 74.43% of whey drain occurred in the first
15 minutes of drainage. Within an hour of drainage, 13.26 liters or 18.17% more of whey were
drained and the final 15 minutes of whey drain was 5.39 liters or 7.39%. The average volume of
whey drain per batch was 8.42 liters.
Whey drain was not collected and drained straight to the central drainage system.This
could raise the BOD coefficients in the immediate body of water.
Effluents sources were wastewater and cleaning chemicals including detergent and
sanitizer. The summarized effluent volume and volumetric coefficient is presented in Table 12
below. The daily average wastewater for washing and sanitizing was 322.00 liters, detergent was
100.00 ml, and sanitizer was 120.00 ml.The total volumetric coefficient of wastewater was 2.65
L/Kg raw milk, whey at 0.60 L/Kg raw milk. and cleaning chemicals comprising detergent and
sanitizer at 1.81 ml/Kg raw milk.
13
Table 12. List of wastewater and cleaning chemicals in effluent from kesong puti production
COWI Consulting Engineers and Planners AS (2000) cited that the volumetric coefficient
of cheese room vary from 0.06 to 20.89 L/Kg raw milk. As such, theVC value of 2.65 for kesong
puti was within the range indicating that the PCC dairy processing facility reasonably consume
water in the kesong puti processing.
The benchmarked VC value for cleaning chemicals was 1.81ml/Kg raw milk.
The packaging material for kesong puti product is an HDPE pouch containing 200 grams
of product. Each pouch weighed 1.91 grams such that a kilogram of product would need 9.55 gm
of packaging material. HDPE pouch is a recyclable material and thebenchmarked volumetric
coefficient of packaging material was 3.30 gm per Kg raw milk.
Product yield ranged from 33.75% to 35.16% averaging 34.69% and with expected yield
of 35.16%, production efficiency ranged from 96% to 100% (Table 13). The low production
efficiency is attributed to the unutilized product trimmings.
14
Table 13. Volume of raw milk input, product output, and production efficiency in kesong puti
production
Product is exposed to probable contamination with open central drainage system where
raw milk from spills and washing milk cans and open sliding screen door that is supposed to
keep the production area free from insects during the entire manual packing duration of 5-10
minutes per batch.
Ice Cream
The wastewater and cleaning chemical source of effluents is summarized in Table 14.
The daily average wastewater from COP was 1,038 liters, the cooling water discharged, a
recoverable process water, was 1,397 liters. Wastewater from cooling water was generated from
batch freezing operation. Cleaning chemicals utilized were 80 ml detergent and 300 ml sanitizer.
The total volumetric coefficient of effluents for wastewater was 24.59 L/Kg raw milk comprising
water used in the COP and cooling water.The use of cleaning chemicals consisting of detergent
and sanitizer were benchmarked to have volumetric coefficient of 3.84 ml/Kg raw milk.
Table 14. Summary of volumetric coefficient wastewater and cleaning chemical effluents
One study cited that the volumetric coefficient of ice cream production ranged from 2.7
to 4.0 L/Kg raw milk (Federal Environmental Office (Umweltbundesamt), 2005). The volumetric
coefficient value of 24.59 L/Kg raw milk in ice cream production achieved by the PCC dairy
processing facility was more than 6 to 9 times than what was achieved in the study.PCC dairy
processing plant management should at least aim for a VC value of 4.0 L/Kg raw milk to reduce
water consumption or wastage.
Table 15. Volumetric coefficients and recyclability of ice cream packaging materials
RECYCLABILITY
VOLUMETRIC
COEFFICIENT (VC)
PACKAGING MATERIAL (gm/Kg raw milk)
Cup, 100 ml Polystyrene (PS) container and lid 102.12 Yes
Cup Label (laminated) 5.88 No
Cup Label sticker holder (laminated) 5.88 No
Total packaging and labeling materials for cup 113.89
Percent Recyclable, % 90%
Percent Non-Recyclable, % 10%
Pint, 475 ml Polystyrene (PS) container and lid 94.91 Yes
Pint Label (laminated) 2.87 No
Pint Label sticker holder (laminated) 2.21 No
Total packaging and labeling materials for pint 99.99
Percent Recyclable, % 95%
Percent Non-Recyclable, % 5%
Half Gallon Polystyrene (PS) container and lid 82.06 Yes
Half Gallon Label (laminated) 1.97 No
Half Gallon Label sticker holder (laminated) 1.58 No
Total packaging and labeling materials for half gallon 85.62
Percent Recyclable, % 96%
Percent Non-Recyclable, % 4%
Gallon Polystyrene (PS) container and lid 72.02 Yes
Gallon Label (laminated) 1.82 No
Gallon Label sticker holder (laminated) 1.26 No
Total packaging and labeling materials for gallon 75.10
Percent Recyclable, % 96%
Percent Non-Recyclable, % 4%
PS container packaging required more material in the smallest packaging. The packaging
and labeling materials were benchmarked to have volumetric coefficient ranging from 113.89 gm
per Kg raw milk for 100-ml cup, 99.99 for pint, 85.62 for half a gallon, and 75.10 for a gallon.
In terms of recyclability, gallon and half-gallon packaging were most recyclable at 96%,
followed by pint packaging at 95%, and the least was cup packaging at 90%.
17
The average production efficiency was 81% from the expected product yield of 95%. The
lowest production yield and production efficiency was way too low suggesting improvements in
the production process. On the other hand, the highest recorded production efficiency was above
100%, which suggests that product filling was underfilled.
Table 16. Raw milk input, ice cream product output, product yield, and production efficiency
The ice cream density (ρ) was 0.66 Kg/L based on the PCC Dairy Processing report.
In spite of product spillage in batch freezing operation, the highest recorded production
efficiency was 122.45% in the first production run;the lowest recorded was 88.65% in the
second, and 97.07% in the third averaging 102.93%. The main reason for high production
efficiency was underfilled products resulting to higher recorded production output as evidenced
by the data provided by the PCC Dairy Processing Facility in which weighed products in pint,
half gallon, and gallon containers were underfilled on the average by 10%, 1%, and 6%,
respectively.Products in cups were overfilled by 1%. Filled products were not weighed even on a
random basis to check on the contents during filling or packaging.
Ice cream production registered the lowest production efficiency of 88.65% and this
could be lower if the product filling is corrected. The apparent cause for this is the excessive
product spillage during batch freezing operation.Product spills just go down the floor finding its
way to the central drainage system.
It was observed that longer batch freezing time occur when ice bank failed to restart due
to damaged thermostat. Batch freezing extends up to 3.82 more minutes each batch freezing
while it can go shorter to 1.28 minutes with ice bank functioning normally. The longer the batch
18
freezing operation takes, the more energy is consumed and generates more wastewater from its
unrecovered cooling water. The registered average wastewater from cooling water discharge was
1,397 liter per day (Table 16), which just flows down the floor to the central drainage system.
Pastillas
The wastewater and cleaning chemicals for production of pastillas are presented in Table
17. The total daily water spent for washing and sanitizing food mixers, utensils, containers, and
the production area was 184 liters. Cleaning chemicals utilized were 40.00 ml detergent and
40.00 ml sanitizer.The benchmarked wastewater volumetric coefficient was 1.19 L/ Kg raw milk
and cleaning chemicals comprising detergent and sanitizer of 0.52 ml/Kg raw milk.
Table 17. Summary of wastewater and cleaning chemical effluent in pastillas production
The average total cooking time for both food mixers was 44.93 hours of which 22.32
hours for Food Mixer A and 22.61 hours for Food Mixer B. The average amount of LPG
consumed for the four batches 24-hour cooking operation was 20.22 Kg or 0.45 Kg/h rate of
consumption and volumetric coefficient of 0.13 Kg LPG per Kg raw milk.
The emission testing results from LTO-accredited private emission testing center is
presented in Table 18. Lambda (λ) is a measure of air-fuel ratio (AFR). Perfect combustion AFR
has lambda equal to 1.0 or an AFR of 14.7. High lambda of 2.0 for both burners indicates lean
mixture with air/fuel ratio equivalent to 29.4. This is expected where air vents or aspirator of
both burners are at full opening at all times. Despite this, Food Mixer A Burner indicated higher
hydrocarbon level at 1,407 ppm along with CO2 of 2.4% in contrast with Food Mixer B Burner
of only 140 ppm and CO2 of 1.30%, which were 10 times and 2 times lesser, respectively. This
19
explained why Burner A has reddish flame compared to bluish flame in Burner B which is
indicative of incomplete combustion and evidenced by soot or particulate matter condensation at
the bottom of the bowl.
Table 18. Emission testing results for food mixer A and B burners
There was small amount of CO in both burners with Burner A almost double than that of
Burner B posing health hazard to production personnel especially that Food Mixer B had its
emission just released inside the processing facility instead of piped out.
Further, with food mixers equipped with oil-jacketed cooking bowl, the cooking time was
longer, taking more than 22 hours and consuming 20.22 Kg of LPG a day.
Two kinds of packaging were used for pastillas product. One was the 120-gram box and
another was an 80-gram polypropylene (PP) pack. The volumetric coefficients of the two
packaging are presented in Table 19. The 120-gram box packaging has a total volumetric
coefficient of 96.57 gm/Kg raw milk, with 98.79% non-recyclable material due to laminated
carton components. It was noted that 0.13 gm/Kg raw milk of excess bond paper from the cutting
of long bond paper went immediately to waste. The 80-gram pack packaging has a total
volumetric coefficient of 12.14 gm/Kg raw milk with 42.94% non-recyclable material due to
laminated paper components.
20
The average product yield was 22.41% (lowest at 15.36% and highest at 27.60%) and
production efficiency was 99.81% and ranging from 68% to 123% based on expected product
yield of 11.9 Kg for every 50 Kg raw milk processed (Table 20).
Table 20. Volume of raw milk input, product output, and production efficiency in pastillas
production
The range of product yields and production efficiencies were wide from 15.36% to
27.60% and 68.40% to 122.94%, respectively. As there were only minimal product loss such as
those sticking on cooking bowl and container after unloading and no observed milk spill during
21
cooking, the most probable reason for the wide ranged yields and efficiencies was in the
recording actual weights of raw milk and ingredient prior to cooking. Actual milk input may
have under- or over-recorded. This has to be investigated by the PCC dairy plant management.
Potential Areas and Steps in the Milk Processing for Optimized Resource Use, Improved
Production Efficiency, and Reduced Waste Load
Milk Receiving
It was observed that farmers use different kinds of containers for their milk deliveries of
varied sizes. This tended to increase the number of milk samples for testing. The more samples,
the more hazardous chemicals were utilized for the milk testing. This is the foremost reason why
farmers’ milk deliveries utilized more than three times of these hazardous chemicals than that of
PCC Gene Pool’s milk deliveries. This is not to mention that farmers use “reused” blue container
or drum of unknown source and previous utility.
Hazardous chemical utilization in farmers’ milk in quality testing can be reduced by 60%
if milk deliveries follow the same manner as the PCC Gene Pool’s where milk are delivered in
20-40 Kg milk tank. Dairy farmers have to be banned using reused and small containers
especially of unknown food contact substance (FCS). An FCS is “any substance intended for use
as a component of materials used in manufacturing, packing, packaging, transporting or holding
of food if the use is not intended to have a technical effect in such food”. All FCSs that may
reasonably migrate to food under conditions of intended use are identified and regulated as food
additives unless classified as generally recognized as safe (GRAS) substances (Marsh & Bugusu,
2007).
The volumetric coefficient (VC) of wastewater of 1.84 L/Kg at milk receiving was twice
the achievable 0.11–0.92 L/Kg raw milk(COWI Consulting Engineers and Planners AS,
Denmark, 2000). Measures have to be implemented to reduce the VC to or below 1 L/Kg raw
milk (Verheijen, Wiersema, & Hulshoff Pol, 1996). This would entail reducing wastewater by
45%.
Pasteurized milk had average production efficiency of more than 100%.This has to be
investigated considering the report of the PCC dairy plant management suspecting that more
milk were withdrawn from the raw milk cooling tank such that more raw milk were actually
utilized in the production, and the possibility of product dilution with water in the process of
transition or product change-over.
22
Water usage can still be reduced by 524 liters daily by recovering the homogenizer
cooling water. This recovered process water can still be used for cleaning production areas.
Better yet, if this cooling water is put into closed circuit circulation eliminating discharge to
drainage system. Recovery of the homogenizer cooling water could bring a 20% reduction in the
wastewater and volumetric coefficient (VC) reduction from 2.08 to 1.66 L/Kg raw milk.
The rated flowrate of the continuous pasteurizer-homogenizer is 1,000 liter per hour. Yet,
the effective flowrate was only 692.41 liters per hour. This gap can be minimized by avoiding
idle time and product change-over time and for the operator to focus in the processing rather than
helping out in the milk receiving. Idle continuous pasteurizer-homogenizer not only consumes
electricity for pumping and heating, but also prolongs the discharge time of cooling water; hence,
wasting more water. PCC dairy plant management should endeavor improving flowrate of this
machine up to its rated capacity that could save the operational time, cooling water, and energy
consumption by 30%.
The bottling rate can be improved by ensuring that there are enough personnel in the
bottle filling. At least three persons are enough to manage the tasks: one for the bottle filling
machine, two (2) for the capping, supplying sanitized bottles, and transferring bottled products to
the cold storage.
Lastly, the 28 liters transition effluents during the product changed-over composed of 25
liters water and 3 liters milk should be collected and must not be left to drain in the central
drainage system. A study on contribution of milk spillage to BOD5 cited that a pound or 0.45 Kg
of BOD5 is directly equivalent to 9 pounds or 4.08 Kg of milk (Rausch & Powell, 1997). The 3
liters milk from the transition effluent, therefore, is roughly equivalent to 0.5 Kg of BOD5 if left
uncollected.
Manual feeding of the machine through buckets was observed to cause significant milk
spillage. This is one important reason why its average production efficiency was 98.22% only.
Further, the product was re-pasteurized due to recontamination after cream separation causing
23
more losses. Manually feeding the cream separator caused the flowrate to vary widely from 109
to 545 liters per hour. Similarly, bottling rate varied widely from 356 to 485 bottles per hour.
The cause of contamination after cream separation had to be investigated and addressed
to avoid re-pasteurization to reduce losses, increase production efficiency, and reduce wastage in
cooling water, energy,and manpower. Since the volume of raw milk only involved around 100
Kg, pasteurization can be done in the batch pasteurizer and directly feeding the milk to the cream
separator can eliminate the manual feeding method and reduce the chance of contamination and
spillage. Further, batch pasteurizer does not waste cooling water and requires no electricity for
pumping.Thus, it greatly reduce waste on process water and electricity, as well as time of
operation.Eliminating the re-pasteurization process should bring a reduction of 40 liters
wastewater and avoid wasting 3 liters milk product to transition effluent.
In improving the bottling rate, the same measure is recommended as in bottling the
pasteurized milk product.
As the wastewater is more than six to sixteen times higher than the achievable VC value
as cited in a study (Brião & Tavares, 2007), PCC dairy processing facility management should
therefore aim to achieve at least a VC value of 1.0 L/Kg raw milk for this product (Verheijen,
Wiersema, & Hulshoff Pol, 1996).
This product is second to the lowest in average production efficiency; hence, need to be
investigated.This product also generatedsignificant volume of cleaning chemicalsand effluents
owing to wastewater and transition effluents during product changed-over. More detergent and
sanitizer wereattributedto a COP rather than a CIP in cleaning and sanitizing procedure for the
pre-mixing and the mixing tanks. CIP system exists in the pre-mixing and mixing tanks and
should be used.
A study cited that CIP system reduces the volumetric coefficient and minimizes water
consumption (Brião & Tavares, 2007). The CIP system, instead of manually cleaning and
sanitizing or COP, could greatly reduce the need for more detergent and sanitizer that were
drained rather than circulated. Moreover when CIP is employed, water and cleaning chemicals
could be used several times.
Bottling rate also varied widely from 533 to 582 bottles per hour and has to be improved
through provision of appropriate number of persons in the filling section.
24
The wastewater was two to five times higher than the achievable VC value as cited in a
study of Brião and Tavares (2007). Like other liquid products, PCC Management should aim to
achieve a wastewater VC value of 1.0 L/Kg raw milk (Verheijen, Wiersema, & Hulshoff Pol,
1996).
Ice cream production generated the largest amount of wastewater (2,435 liters daily
average or VC value of 24.60 L/Kg raw milk) among the dairy products for COP and cooling
water of the batch freezer. Ice cream production alsohad the third lowest recorded production
efficiency of 88.65%, mainly due to product spillage. Product leaked out of the batch freezer and
spillage frequently occurs during manual loading using a pitcher. On other extreme, production
efficiency went beyond 100% of up to 122.45% mainly due to underfilled dairy products
registering more production. Packaging ice cream should be monitored with digital weighing
scale at random basis,for example, every 5-10 cups and should be supervised by the production
supervisor and quality control officer.
Processing time was greatly affected by the availability of manpower. At times when
there was only one person manning the station feeding the batch freezer and packaging the
product, batch freezing loads were deliberately reduced from 1.5 pitcher (approximately 3 liters)
to just one (1) pitcher (approximately 2 liters).Unfortunately, reducing the amount of load from
1.5 to 1 pitcher do not proportionately reduce the freezing time or operating time of the batch
freezer. Specifically,the duration of batch freezing for 1.5 and 1 pitcher ice cream mixture
required an average of 5.31 minutes and 4 minutes, respectively. Deliberately reducing the load
due to lack of manpowerbrought more operating time, energy and, along with it, more cooling
water wasted down the drain.
To maintain optimum operation of batch pasteurizer where 1.5 pitcher or more of ice
cream mixture is loaded rather than one, at least two persons should man the ice cream
production. Product leakage should be avoided by properly maintaining the batch freezer
machine. Installation of drip shields to prevent ice cream mixture or product spillage going down
the drain is highly recommended.
25
The wastewater generated was more than 6 to 9 times the VC value achieved in the study
at 4.0 L/Kg raw milk (Federal Environmental Office (Umweltbundesamt), 2005). PCC dairy
processing plant management should at least aim for a VC value of 4.0 L/Kg raw milk to reduce
water consumption or wastage.
Kesong PutiProduct
Kesong puti production generated the largest volume of effluents mainly from the
uncollected whey drain. Whey drains were not collected and went down directly to the drainage.
Analysis of its composition showed considerable amount of nutrients including fat, lactose,
protein, solid non-fat, and salt especially in its first 15 minutes of drainage where 74.43% of the
total whey drain occur (Table 21). Productionyields ranged from 33.75% to 35.16%, averaging
34.69%. Production efficiency ranged from 96.00% to 100.00%, averaging 98.67%.
Table 21. Properties of Kesong Puti Whey Drain across sampling time
AVERAGE COMPOSITE
PARAMETER
Average
T15 T60 T105
Freezing Point, °C -0.672 -0.727 -0.737 -0.684
% Salt 0.97 1.04 1.05 0.98
% Fat 0.31 0.00 0.00 0.023
% Protein 3.86 4.14 4.19 3.93
% Lactose 5.71 6.16 6.24 5.79
Conductivity 8.19 8.45 8.18 7.92
% SNF 11.42 12.20 12.35 11.61
Temp., °C 26.0 25.9 26.2 26.2
Density, gm/cc 1.03916 1.04243 1.04310 1.0431
pH 6.55 6.62 6.65 6.65
Note:
T15– average whey drain properties within first 15 minutes of draining whey.
T60 – average whey drain properties at one (1) hour of draining whey.
T105 – average whey drain properties at final 15 minutes of draining whey.
Composite – average whey drain properties of the whole whey drain.
It is cited in one study that whey comprises 80–90% of the total volume of milk used in
the cheese-making process and contains more than half of the solids from the original whole
milk, including 20% of the protein and most of the lactose (COWI Consulting Engineers and
Planners AS, Denmark, 2000).
26
Whey, when left uncollected and allowed to flow down the draincould raise the BOD
coefficients in the immediate body of water. As part of good management practices, it is
recommended to collect the whey drain for other uses such as for the production of ricotta and
whey cheeses or for use as feed supplements for animals or to improve the fertility of soil in the
PCC.
Whey can be fed to animals and ruminants which consume up to 30% of their dry-matter
intake as liquid whey while swine often experience diarrhea if more than 20% of their dry matter
is liquid whey. Further, calves have been fed up to 89% dried whey with favorable growth rates.
Further,spreading whey at 102 mm yearly improved corn yields and that the beneficial effect
could be observed a year after application (Carawan, Chambers, Zall, & Wilkowske, 1979).
Research and product development should be pursued along these lines. Eliminating the
whey drain from the effluents would reduce the volume of effluents in kesong puti production by
99.7%.
The wastewater in kesong puti production is within the range of achievable VC value of
0.06–20.893 L/Kg raw milk and therefore, reasonable (COWI Consulting Engineers and
Planners AS, Denmark, 2000).PCC Management should maintain its current production
management practice, but had to improve production yield and efficiency by minimizing or
utilizing product trimmings in packaging. Product packaging condition should be improved,
eliminating raw milk spills and wash from the central drainage system and ensuring that sliding
screen doors are always closed during processing and packing.
Pastillas Product
Only minimal product losses wereobserved during the production process and
spillagewas almost nil.Yet, production efficiencies ranged widely from 68.40%, lowest recorded
among dairy product, to 122.94%. The most probable reason for this was in recording actual
weights of raw milk input prior to cooking. Actual raw milk input could possibly recorded lesser
or more. Recording production input and product yield should be investigated and closely
supervised.
Pastillas was the only product utilizing LPG as fuel for cooking. With longer cooking
time, the average amount of LPG consumed was 20.22 Kg or at the rate of 0.45 Kg/h. Further,
Food Mixer A burner indicated inferior combustion based on emission testingand indicative of
the accumulating carbon particulate condensing at the bottom of the oil-jacketed bowl.
Cooking time should be reduced to lessen the amount of emission. Direct fired employed
by other private processing facility reduced their cooking time to only 2 hours as reported by the
27
PCC Dairy Processing Plant Manager during their visit in a commercial private processing
facility. As such, food mixers should be tested using a direct fired bowl rather than its currently
used oil-jacketed bowl to reduce the cooking time along with the LPG consumption. Meanwhile,
Food Mixer A should be replaced with better burner.
Packaging Materials
Packaging may still only contribute a small portion of GHG emissions for an entire life
cycle for a finished dairy item; however, persistent public concern exists that consumer-derived
packaging waste contributes significantly to landfill space and landfill methane emissions
(Milani, Nutter, & Thoma, 2011).
Eventually, packaging and labeling materials are discarded after consumption. Whether it
ended into recycling or dumped-in landfills, it is an important interest for further study.
The volumetric coefficients of packaging and labeling materials for each dairy product
are presented in Table 22. In terms of volume of packaging materials, HDPE bottles were
commonly used for liquid milk products, followed by pastillas particularly the 120-gram box and
ice cream containers, and the least material was the 200-gram HDPE pouch for kesong puti.
Generally, the smaller the unit of packaging, the more packaging and labeling materials were
utilized. Though most of the packaging materials are recyclable, labels made up of laminated
papers were not. In terms of recyclability of packaging materials, pastillas product packaging
including 120-gram box and 80-gram pack were the least recyclable at 1% and 57%,
respectively. Improvement in packaging material for pastillas is most compellingto achieve
better recyclability.
28
High density polyethylene (HDPE) bottles and caps, polystyrene (PS) containers and lids
for ice cream, and polypropylene (PP) pouch for pastillas are recyclable. The challenge in these
recyclable materials is to further reduce its weight. For example, in the recent development in
PET bottles for bottling purified water, cap was reduced in size and shape, and thus reducing the
amount of waste. It is therefore necessary to explore alternative sources or suppliers of bottles
that are more environment friendly. Glass bottle is one better alternative.However, initial
investment is high. Studies of energy use in producing a package concluded that returnable glass
packaging used 3 times less energy provided that 20 return trips were made compared with one-
time use dairy product packaging made of paperboard and plastic composites. Landfill disposal
would be very favorable for returnable glass end-of-life disposal, as the glass will not decompose
as compared with paperboard and plastic (Milani, Nutter, & Thoma, 2011).
The same thing with the ice cream containers and lids, alternative sources or suppliers
should be explored. For example, one company is introducing their latest biodegradable product
line. The material is claimed to be 100% biodegradable, recyclable, and compostable. It is
biodegradable in land, water and landfill, can be recycled and the material can be re-used in other
non-food plastic products, and can be processed in ordinary composting facilities. It can even be
used in backyard compost such that no special disposal is needed. Simply by throwing in the
trash, the biodegradable product will react with the micro-organisms present in the waste and
29
will fully degrade within 9 months to 5 years. On top of this, the same quality can be expected:
same durability and color of the product is not affected (Vassar Industries, Inc., 2013).
As an institution committed to the Integrated Management Systems Policy, the PCC dairy
processing plant management and personnel have to be continuously exposed and trained on
developments in food industry, dairy processing, and plant housekeeping, and production
technology.
Clean and well-cared machines and facilities perform better and are more efficient. The
esthetic beauty of the dairy processing facility and the machines promotes enthusiasm among
itspersonnel. However, all these must be created by everyone. Periodic general housekeeping is
30
recommended such as once weekly or once monthly. The “Clean As You Go” policy of the dairy
processing facility should be seriously followed.
Quality
With the integrated management system IS0 9001/14001 already installed, the CP
program must be integrated into that system and should not compete for people and resources
with that quality and management program. The production supervisor or at least the quality
control staff must not leave production unattended or unsupervised. Production aide must be
supervised, especially in preparing for the ingredients and utilization of cleaning chemicals.
Management support must be provided ensuring timely provisions of resources. Assistance from
DOST Industrial Technology Development Institute (ITDI) should be pursued on cleaner
production promotion. They developed a simplified Environmental Management System (EMS)
model suitable for small and medium enterprises (SMEs) based on PNS ISO 14001 2004 and
PNS ISO 14004 2004 the second edition.
Maintenance
Machine maintenance program must be developed and implemented. It was observed that
many machines have not been operational for quite some time now. To mention, the ice bank
thermostat is not working; people have to constantly put it “on” and “off”. This seriously affects
the quality of raw milk upon receiving, quality of products, and the processing time. Leaking
gear oil and loose fan belts were another indication of improperly maintained machines such as
in food mixers in cooking pastillas 24/7.
Machines must be working well so that employees would not be stressed and to avoid
pollution. Unmaintained machines result to shutdowns and breaks and generate losses of electric
power, water, and even packaging materials. It also generates rework and reprocesses wasting
inputs, energy, time, and money, and reduces production efficiency.
Prevention at Source
Table 23a. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in milk receiving
Table 35b. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in pasteurized milk
production
Table 35c. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in low fat milk
production
Table 35d. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in chocolate milk
production
Table 35e. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in kesong puti
production
Table 35f. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in ice cream
production
Table 35g. Recommended strategies/methodologies in addressing inefficiencies, wastage, and production issues in pastillas production
ADDRESSING ADDRESSING
ACTIVITY/PRODUCT INEFFICIENCIES ADDRESSING WASTAGE PRODUCTION ISSUES
Pastillas Institution of product Experiment the possibility of using direct Explore alternative packaging
quality control fired bowl for Food Mixer A and B to materials with better
measure to insure shorten cooking time and save on LPG recyclability and
consistency of product for cooking biodegradability
Replacement of better Reduction in weight, recyclability, and Connect exhaust pipe of food
burner for Food Mixer biodegradability of packaging and mixer B to the existing
A for better labeling materials exhaust pipe leading outside
combustion and fuel the processing facility
efficiency eliminating exposure of plant
Provision of control, personnel from emissions
monitor, and supervise containing CO and ease the
milk input and product load of air conditioners of the
output facility
38
Summary
The principal purpose of this study was to assess cleaner production practices in the dairy
processing of the Philippine Carabao Center (PCC) National Headquarters and Gene Pool at the
Science City of Muñoz, Nueva Ecija. This entailed the following purpose: 1) identification,
description, and benchmarkof input and output of dairy processing; 2) determination of milk
products pollutants and wastage; 3) identification of potential steps and areas in the milk
processing for resource use reduction, production efficiency improvement, and effective
reduction of waste load; and 4) recommendation of strategies and methodologies in promoting
cleaner production in the dairy processing to effect improvement in production.
The input and output of milk receiving and processing include six popular dairy products
such as pasteurized milk, low fat milk, chocolate milk, ice cream, kesong puti, and pastillas.
Each of the input and output were identified, characterized, and quantified serving as important
indicators of cleaner production. It further served as basis in identifying opportunities for better
production options for least effluents and wastage. It was essential in determining, quantifying,
and in some particular case, characterizing sources of wastewater, hazardous chemicals,
effluents, and air emissions where volume of discharge, weight of materials, recyclability, and
recoverability became parameters of pollution and wastage. Local industry standards seem to be
unavailable yet at this point so that most of the literature review came from dairy countries with
rich repository of knowledge on the matter.
The volumetric coefficients expressed in volume or weight per kilogram raw milk served
as the primary basis in the measure of wastage related to the production management. Sources of
wastewater were water for cleaning and sanitizing and cooling. Sources of hazardous chemicals
were from chemicals used in determining the quality of raw milk as means of controlling quality
of incoming raw milk from PCC Gene Pool and dairy farmers. Sources of effluents identified
and measured were cleaning chemicals such as detergent, sanitizer, alkali, acid, and most
importantly, whey drain in the production of kesong puti. Measuring packaging and labeling
materials were important for benchmarking volume and extent of recyclability as potential threat
to already problematic solid waste disposal. The source of air emission was from the combustion
of LPG fuel in cooking pastillas dairy product.
The cleaner production observation of practices identified kesong puti as the first in the
dairy product generating the most volume of effluents, with its uncollected and unutilized whey
indicative of the highest value of effluent volumetric coefficient followed by low fat milk and
chocolate milk due to its incidental transition effluents or product change-over. Ice cream
39
product ranked first in generating the most volume of wastewater followed by low fat milk,
kesong puti, pasteurized milk, chocolate milk, and the least was pastillas product.
The use of hazardous chemical as quality control measure in milk receiving was ideal
with PCC Gene Pool’s milk delivery where raw milk are delivered in milk tanks. Compared to
farmer’s milk deliveries, raw milk are delivered in reused containers of unknown previous utility
and varying sizes. Hazardous chemical use for quality testing dairy farmers’ milk is more than
three times than the PCC Gene Pool’s milk as samples were tested by container regardless of size
– the more container, the more samples are tested and the more hazardous chemicals are utilized.
Packaging and labeling materials utilization was highest in liquid dairy products based on
its volumetric coefficients and total daily volumes followed by ice cream and the least was in
pastillas. Though liquid milk bottles were high in terms of volumetric coefficient values,
majority of the materials are recyclable in contrast with pastillas packaging materials where most
of materials, from 43% to 99%, are non-recyclable. The choice of packaging and labeling
materials is important in minimizing impact to solid waste disposal. Hence, degree of
recyclability and volume of materials are equally important consideration in the choice of
packaging and labeling materials.
Burning LPG for cooking pastillas was the source of air emission. Qualities of burners’
emissions revealed that combustion of one of its burners was inferior releasing higher carbon
monoxide, carbon dioxide, and hydrocarbons. With oil jacketed cooking bowls in the food
mixers, cooking time was longer, consuming or burning more LPG and releasing more
emissions.
Further, production yield and production efficiency were another important indicators of
cleaner production. Other indicators were flowrate, bottling rate, and batch freezing time for ice
cream. Lower values and wide ranged flowrates and bottling rates, as well as exceeding
production efficiencies are indication of inefficiencies. Lower rate of efficiency indicates
wastage and spillage. More than 100% production efficiency indicates underfilled packaged
products. Lower flow rates indicate longer processing time and more wastage as well as lower
product shelf life. Longer freezing time also suggests inefficiency in production and generating
more wastage. Inefficiencies in production consume bigger resources such as water, electricity,
and manpower and therefore not economical and generating more wastewater, effluents, and air
emissions.
Finally, this study recommends these strategies in promoting cleaner production in the
PCC dairy processing facility: 1) provision of capacity building program for all its personnel in
the area of Good Manufacturing Practice (GMP) and Hazard Analysis and Critical Control
Points (HACCP), yearly training and refresher on processing skills and production standard
40
procedure; 2) training and exposure trips in related food industry, dairy processing, and dairy
plant housekeeping, and production technology; 3) enforcement of standard procedures in CIP
and COP, washing and sanitizing procedures, and in handling and disposing hazardous
chemicals; 4) installation of management and control of plant chemicals; 5) periodic evaluation
on workers’ loss of enthusiasm to effect behavioral improvement; 6) review and familiarize dairy
plant personnel on its organizational structure including roles and responsibilities of each
personnel; 7) review and ensure enough personnel requirements for the 8-hour work shifts to
avoid stress and ensure integrity in the production process; 8) develop and implement preventive
maintenance for all machines and equipment including air conditioning and drainage systems,
and utility vehicle; 9) integration of the cleaner production in the integrated management system
IS0 9001/14001; and 10) ensure supervision of production personnel at all times.
Conclusions
The Philippine Carabao Center’s Integrated Management Systems policy and its
commitment to good management practices had put its dairy processing facility living up with
the quality of dairy products in which public is assured of the processing and product standards
signifying that cleaner production practices exist in the dairy processing. Having identified the
potential areas and steps in the milk processing to reduce wastage and improve production, the
study have identified strategies and methods towards further promoting cleaner production
including building the capacity of the dairy processing plant personnel, development of skills and
commitment, strengthen system for safeguarding the integrity of processing standards,
implementation of preventive maintenance of machines and equipment, and improvement in the
working condition of plant personnel.
Recommendations
This study was able to benchmark the input and output of production in terms of
quantities, properties, and more importantly volumetric coefficients. It was, at the onset of
development of this study, intended to include electricity consumption but due to unavailability
of information, it became a study’s limitation. Respective of this, it is recommended to further
pursue this study to include electricity consumption. More similar studies are needed to establish
the volumetric coefficient of pastillas and to include more dairy products not covered in this
study.
It is recommended for the PCC dairy processing facility management to pursue cleaner
production following the recommended strategies and steps as outlined in this study and to
monitor improvements as integral part of the Integrated Management System.The benchmarked
volumetric coefficients on wastewater, cleaning chemicals, hazardous chemicals, and packaging
41
materials are important reference points in measuring improvements while pursuing the cleaner
production options.
In the absence of industry standards available locally, the PCC, as a research institution,
should endeavor to do research and studies in relation to production yield and volumetric
coefficients in dairy processing of various scale and production environments. Establishing
volumetric coefficients and using such indicator for cleaner production assessment will better
improve the environmental management aspect of dairy processing while improving efficiency
and profitability.
REFERENCES
BRIÃO, V. B., and C. R. TAVARES. 2007. Effluent Generation by the Dairy Industry:
Preventive Attitudes and Opportunities. Brazilian Journal of Chemical Engineering of
Passo Fundo, 487-797.
MARSH, K., and B.BUGUSU. 2007. Food Packaging - Roles, Materials, and Environmental
Issues. Journal of Food Science, 72(3), R39–R55. doi:10.1111/j.1750-3841.2007.00301.x
MILANI, F. X., D.NUTTER, and G. THOMA. 2011. Environmental impacts of dairy processing
and products: A review. Dairy Science.Retrieved August 14, 2014, from Journal of Dairy
Science website: http://www.journalofdairyscience.org/article/S0022-0302(11)00437-
1/fulltext
NATIONAL DAIRY AUTHORITY. 2010. Dairy Road Map 2010-2016. National Dairy
Authority, Planning & Management Services Department, Quezon City.
42
RAUSCH, K. D., and G. M. POWELL. 1997. Dairy Processing Methods to Reduce Water Use
and Liquid Waste Load. Kansas, Manhattan, USA: Kansas State University.
SHI, L., LI, R., and X. WEN. 2011. Industrial Pollution Prevention Strategy - Cleaner
Production. Point Sources of Pollution: Local Effects and It's Control, Volume I.
Department of Environment Science and Egineering, Tsinghua University, Peoples
Republic of China: UNESCO Encyclopedia of Life Support Systems (EOLSS). Retrieved
April 22, 2015, from http://www.eolss.net/sample-chapters/c09/E4-11-02-04.pdf
VASSAR INDUSTRIES, INC. 2013. Vassar Biodegradables. Retrieved November 3, 2014, from
Vassar Industries, Inc.: The Plastic Packaging Specialist:
https://vassarindustries.wordpress.com/
VERHEIJEN, L., D.WIERSEMA, and L. HULSHOFF POL. 1996. Management of Waste from
Animal Product Processing. (J. De Wit International Agriculture Centre) Retrieved June
29, 2015, from FAO Corporate Document Repository:
http://www.fao.org/wairdocs/lead/x6114e/x6114e00.htm#Contents