Professional Documents
Culture Documents
Liugong & Dealers Global: Strong Presence, Sublime Support
Liugong & Dealers Global: Strong Presence, Sublime Support
dealers Global>>>
The LiuGong series of logos herein, including but not limited to word marks, device marks, letter of alphabet marks and combination marks, as the
registered trademarks of Guangxi Liugong Group Co., Ltd. are used by Guangxi Liugong Machinery Co., Ltd. with legal permission, and shall not be used
without permission. Specifications and designs are subject to change without notice. Machines shown may include optional equipment and may not
include all standard equipment.
908D
EXCAVATOR
Summarized benefits
Built for Efficiency Operator Comfort and Safety
Fuel Efficient Yanamar Engine Ergonomic Design
Advanced Hydraulic System Minimal Kick Back
Excellent Visibility
Easy to Maintain Comfortable Low Noise Cabin
Easy Engine Access
Convenient Maintenance Ports All-ROUND SERVICE SUPPORT
Fault Diagnostic System Exceptional Service Support
Parts Support
Always Reliable Maintenance Support
Parts, Service, Attachments to Count on Machine Inspection
Wider More Stable Axles Training
Proven Hydraulics
Delivering
all-round
performance
with low
running costs
Excellent Visibility
The enlarged cab allows gives the operator excellent 360 degree visibility including the working instruments, and the rear of
the machine. This makes operation easier and much safer.
All- Round
SERVICE SUPPORT
Exceptional Service Support Maintenance Support
The LiuGong Product Support Team provides parts and Your local LiuGong dealer will arrange a factory-trained
service solutions for the owning and operating needs of service expert to perform all maintenance on your
our customers. Be assured that with every machine equipment to the precise specs and schedules required to
purchased a dedicated team of LiuGong specilists are keep your machine at top productivity.
ready to provide exceptional support. For all your
machine support needs from warranty and service Machine Inspection
repairs, planned maintenance, training, and getting the Before every busy season, your LiuGong dealer can
right genuine LiuGong part, contact your local LiuGong thoroughly inspect your machines and perform proper
dealer and experience our service support promise. maintenance service to make sure every machine will run
at top productivity with minimal downtime as well as
Parts Support ensuring the best fuel economy and lower operating
Genuine LiuGong Parts are only available through the costs.
LiuGong Dealer Network. Keep your machines running at
its highest levers by using only Genuine LiuGong Parts. Training
LiuGong maintains an extensive inventory in its 11 Parts LiuGong dealers provide training to help you efficiently
Distribution Centers around the world to bring the parts operate your LiuGong equipment for top productivity, long
closer to the customer. machine life and low maintenance costs.
Standard and
optional equipment >>>
Standard equipment
ENGINE SYSTEM •• AM/FM Radio with MP3 audio UNDERCARRIAG
•• Yanmar 4TNV94L-SLY jack •• 400 mm double grouser rubber
4-cylinder,water cooled, direct •• 1 outside rearview mirror track-shoes
injection Stage Tier2Diesel •• 1 cab rearview mirror •• 5 lower, 1 upper roller
Engine •• Working Hour meter •• 1 track frame under-guards
•• Air filter with pre-cleaner •• Voltmeter (each-side)
•• Windshield Wipers
HYDRAULIC SYSTEM •• Cab and boom mounted working FRONT ATTACHMENTS
•• Dual direction auxiliary pipes lights •• 3,710 mm boom and 1,650 mm
•• Auto travel speed change •• Fire Extinguisher arm
•• Dual direction auxiliary pipes •• Horn •• 0.32 m3 (SAE, heaped) bucket
•• Swing boom •• Storage box
Optional equipment
•• 0.28 m3 reinforced bucket •• OPG (operation protection guard •• Rotating beacon
•• 0.14 m3 narrow bucket Structure) •• Refuel pump
•• 0.18 m3 narrow bucket •• 2 outside rearview mirrors •• Hammer piping
•• 0.36 m3 large bucket •• Heavy lift and power boost •• 2 way aux. piping
•• Arm: 2,100 mm •• Boom/arm holding valves •• Hydraulic jackhammer
•• 600 mm wide tracks •• Control pattern change valve •• Hydraulic quick coupler
•• Steel track with rubber pad •• Travel alarm •• Ripper shank
•• 450 mm Rubber track •• In cab rearview mirror
908D
SPECIFICATIONS >>>
SPECIFICATIONS
ENGINE UNDERCARRIAGE
Emission Regulation Tier 2 / Stage II Center Frame X-Frame
Model Cummins B3.3 Track Adjustment Hydraulic
4-cylinder, water cooled, direct Number of Carrier Rollers 1 each side
Type
injection
Number of Track Rollers 6 each side
Gross Power 60 kW (80.5 hp) @ 2,200 rpm
Number of Idler Rollers 1 each side
Net Power 54 kW (72.4 hp) @ 2,200 rpm
Number of Shoes 39 each side
Maximum Torque 292 N·m @ 1,600 rpm
Width of Track Shoes 450 mm
Bore x Stroke 95 x 115 mm
Displacement 3.3 L
ELECTRIC SYSTEM
System Voltage 12 V
DRIVE AND BRAKES
Batteries 12 V
Driven by a one-piece two-gear piston hydraulic motor
and reducer with small volume and strong traction; the
motor and hydraulic pipelines are hidden in the track
SERVICE CAPACITIES
mechanism to prevent damage from rugged road surfaces;
parking brake and shock-absorbing valve are installed Fuel Tank 170 L
inside the motor, ensuring stable travelling and parking as
Engine Oil 7L
well as reliable braking.
Final Drive (each) 1.3 L
Max. Travel Speed High: 4.2 km/h
Low: 3.0 km/h Cooling System 15 L
Gradeability 70 % Hydraulic Reservoir 60 L
Drawbar Pull 56 kN Hydraulic System Total 110 L
HYDRAULIC SYSTEM
Main Pump Two variable displacement
piston pumps
Main Pumps Total Flow 158 L/min
Relief Pressure, main 27.5 Mpa
Pilot Pump Flow 20.7 L/min
908D
SPECIFICATIONS >>>
DIMENSIONS
Unit: mm
Boom length Boom length 3,710 G Overall Width of Upper structure 2,255
Arm length Arm length 1,650 2,100 H Tail Swing Radius 1,785
Unit: mm
Boom length Boom length 3,710
Blade Position : Up
Bucket: SAE 0.32 m3, Boom: 3,710 mm, Arm: 1,650 mm, Shoes: 450 mm